Meshopia · EnglishEnglish
MESHOPIA

47 modelos etiquetados

#hobby

Descubre modelos 3D etiquetados como hobby y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Whisbang RC whistling bombs

Whisbang RC whistling bombs

Whistling accessory for RC activities designed to produce sound while moving through the air, without explosive function. Possible uses - add an acoustic effect to a controlled RC demonstration - experiment with airflow and sonic cavities Printing recommendations - As a first test, PLA is a simple option; switch to PETG, ASA, or another material only if the use requires temperature resistance, outdoor use, or higher toughness. - A layer height of 0.20 mm is usually a good starting point; reduce the layer height if you want to prioritize surface detail. - Find a stable face to support the piece and check for overhangs, bridges, and surfaces requiring supports in the slicer. - Print a single unit or a fit test first when there are tolerances, joints, or compatibility with a real object. What to check Do not add pyrotechnics or charges; avoid throwing towards people, animals, or property and respect flight field regulations. As a starting point, the sheet indicates FDM with PLA, PETG; these details must be confirmed in the slicer.

Technology
FDM
material
PLA, PETG
Difficulty
Intermedia
Vista de DJI Mini 4 Pro: modelo de referencia para diseñar accesorios

DJI Mini 4 Pro: reference model for designing accessories

Digital model of the DJI Mini 4 Pro intended as a reference for preparing accessories. It allows for studying the drone's shape and planning mounts or housings in a design program. The download does not constitute a functional drone or a flight kit: printing its silhouette does not reproduce motors, electronics, or mechanisms. The source does not provide tolerances that allow the mesh to be used as a certified dimensional pattern. Preparation, compatibility, and printing Import the file while maintaining its scale and compare the contact areas with the actual drone before designing a final part. For a fit test, print only the necessary region when your software allows it. Do not assume that a part designed around this reference will leave sensors, ventilation, or joints clear. There is no documented print profile.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Brazo de recambio para servomotor MG995

Replacement arm for MG995 servomotor

Printable arm or horn to replace the output attachment of an MG995 servomotor. It is a coupling piece between the servo shaft and the mechanism to be moved; it does not include the servomotor or the control rod. The compatibility indicated by the source is limited to the MG995 and must be verified with the specific unit, especially regarding the central splining and the fastening. Preparation, compatibility, and printing The author suggests a 50% infill. This data does not certify the strength of a particular print. Before assembling, check that the splining fits without force, that the screw holds the piece, and that the arm does not rub during the entire range of motion. Prepare a fit test first and avoid compensating for an incorrect fit by tightening the screw further.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DJI Mavic 3 Pro: referencia 3D para accesorios

DJI Mavic 3 Pro: 3D reference for accessories

Digital reference of the DJI Mavic 3 Pro obtained by the author by converting DJI GLB models to STL format. Its purpose is to serve as support for accessory design or the creation of a scale model. It is not a set of parts to manufacture a flying drone, and the source expressly states this. It also does not provide an independent dimensional verification of the converted models. Preparation, compatibility, and printing Check units, scale, and dimensions against the actual equipment before designing clamps or mounts. A printed scale model can be useful for studying volumes, but it does not validate a fit on its own. The drone's geometry and its fine details may require supports depending on the orientation; check the slicer preview. Material, layer, and infill are not documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Protector de esquinas traseras para Arrma Senton

Rear corner protector for Arrma Senton

Accessory designed to cover the rear corners of an Arrma Senton body. The source presents it as a protector for those areas; the download corresponds to the printable part and not to a complete body. It does not specify the Senton version, the mounting method, or impact resistance tests. Preparation, compatibility, and printing Compare the part's outline with the corners of your body and check the clearance relative to the wheels and suspension. Before preparing the final print, check the support faces and potential overhangs in the slicer. The material and orientation must be chosen based on the desired fit and flexibility; there are no documented print settings that can be copied as a validated profile.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Compresor de aire en miniatura a escala 1:30
OtrosGratis

1:30 scale miniature air compressor

Miniature of an air compressor designed as a detail for a 1:30 scale model truck. It is a decorative accessory: it does not compress air nor does it incorporate functional mechanisms. It can be part of the setting of a cargo box, provided its dimensions fit the chosen vehicle. Preparation, compatibility, and printing The source mentions a 0.8 mm layer and a print skirt, but that layer value requires confirmation and is not adopted here as a recommendation. Check the dimensions and small details of the file before choosing the nozzle and layer height. A skirt helps check the initial extrusion, but it does not eliminate wall seams on its own.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Carcasa tubular para variador de coche RC de drift 1:10

Tubular housing for 1:10 scale RC drift car ESC

Tubular housing designed for an electronic speed controller (ESC) of a 1:10 scale drift car. The author uses PETG and clarifies that the piece shown in their photograph has been polished. They do not identify the specific ESC model nor do they provide information regarding universal compatibility, a degree of waterproofing, or a cooling function. Preparation, compatibility, and printing Compare the internal dimensions with your ESC and reserve space for connectors and cables. Also, check that the housing does not obstruct the necessary ventilation for the equipment. Polishing is a post-processing finish, not an automatic property of the print. The source does not specify layer height, infill, or orientation; prepare a fit test before installing the electronics.

Technology
Sin probar
material
PETG
Difficulty
Sin especificar
Vista de Rueda TurboFun para drift RC a escala 1:10

TurboFun Wheel for 1:10 scale RC drifting

TurboFun Wheel identified by the source for 1:10 scale drift modeling. The available documentation is limited to the design name and its usage tag; it does not confirm hex diameter, offset, width, or compatible tires. These measurements must be obtained from the file and compared with the car before printing. Preparation, compatibility and printing Maintain the original scale during the first check. Check the center hub, the axle pitch, and the clearance from the suspension arms. Sharing a 1:10 scale does not guarantee compatibility between wheels and vehicles. No material, infill, or strength testing data is available; treat the first print as a dimensional check.

Technology
Sin probar
material
—
Difficulty
Sin especificar
3D

FPV micro-drone project with ESP32-C3 SuperMini

Files from an FPV micro-drone project identified by its author using the ESP32-C3 SuperMini board. The preserved download contains two STLs: Drone_Frame.stl and ToroidalProp.stl. The names identify a frame and a toroidal propeller; they do not confirm on their own the dimensions, component compatibility, or whether the assembly is flight-capable. The original page is not available as of the check on September 24, 2026. Authorship, provenance, and imported files are preserved. There are no assembly instructions, firmware, or verifiable parts lists in the file. Before printing, open both files separately and check scale, walls, housings, and clearances. Do not select motors, batteries, or cameras based solely on the project title. The propeller requires specific balancing and validation before any testing; this sheet does not certify its performance nor does it replace the motor manufacturer's instructions.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Plataforma de carga para camión RC 6×6 a escala 1:18

Flatbed for 1:18 scale 6x6 RC truck

Flatbed for a 1:18 scale 6x6 RC vehicle. The design allows for equipping or customizing the rear area of the vehicle. The source does not identify a specific chassis nor provides distances between anchor points, permissible load, or a universal fastening system. Preparation, compatibility, and printing Check the length, width, and support points of the file against your chassis. Check the axle travel and the distance to the wheels before deciding on the mounting position. In the slicer, look for an orientation that keeps the loading surface flat and does not deform the supports. No material or print profile is documented; a fit test will allow for adjusting the preparation without assuming compatibility.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Patín de techo para Hobby Plus CR18P Evo Pro

Roof skid for Hobby Plus CR18P Evo Pro

Skid designed to be placed on the roof of the Hobby Plus CR18P Evo Pro. It is a specific body accessory intended for the upper area of the crawler. The source does not detail the fastening method nor certify structural protection or rollover resistance; its nominal compatibility does not replace verification with the actual body. Preparation, compatibility, and printing Place the model on the roof and check supports, holes, and clearances before printing the final version. Pay attention to thin areas that could be damaged when removing supports. No material, layer, or infill are documented. Choose the finish and orientation according to the geometry, without altering the mounting points to fit them by pressure.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de herramientas de escala para plataforma de crawler RC

Scale toolbox for RC crawler platform

Miniature toolbox to decorate an RC crawler platform. The author designed it for 1:10 scale and states dimensions of 144 × 54 × 33 mm without lid and 36 mm height with lid. It is a scale accessory, not a box containing tools. Preparation, compatibility, and printing Check the lid and clearances before resizing. The source suggests scaling down to 50% for a 1:18 vehicle, but the exact geometric conversion from 1:10 to 1:18 is approximately 55.6%; the final size should be decided by the available space. Walls and fits also change when scaling. No print profile is documented; check both pieces separately.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de carga para Redcat Everest Gen7 a escala 1:10

Cargo box for Redcat Everest Gen7 1:10 scale

Cargo box designed for the Redcat Everest Gen7 crawler at 1:10 scale. The author mentions additional variants with greater flexibility intended for a custom suspension assembly. It should not be assumed that all variants correspond to the stock vehicle or that they can be combined indiscriminately. Preparation, compatibility, and printing Check the file names and shapes to choose the appropriate variant before slicing. Verify anchor points, track width, and suspension articulation with your configuration. The source does not provide material, layer, or infill settings. A partial print of the mounting area can be used to check the fit before manufacturing the complete box, without modifying the original download files.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Jaula y portaequipajes para caja de crawler RC

Cage and luggage rack for RC crawler box

Cage structure or luggage rack for the cargo box of an RC crawler. The author mentions both a 1:18 scale and its use on an SCX24; this discrepancy prevents establishing a single compatibility scale here. The assembly must be adjusted based on the actual dimensions of the box and mounting points, not just by the scale name. Preparation, compatibility, and printing The source indicates printing with supports. Place them where the slicer shows overhangs, ensuring they can be removed without breaking the bars. Check thicknesses and clearances if you scale the part. No material, layer, or infill is documented, and a printed scale-model cage does not establish impact protection.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Cono señalizador para circuitos de radiocontrol

Marker cone for radio-controlled circuits

Small cone designed to delimit RC racing tracks. It can be used to mark curves, passing points, or driving exercises in a practice area. The source does not establish a fixed scale, so the size must be chosen according to the vehicle and the visibility required on the circuit. Preparation, compatibility, and printing Check that the base remains flat and that the tip details are reproduced in the laminator. If you change the scale, check the wall thickness and the stability of the cone. To prepare several units, leave sufficient spacing between pieces and verify the first layer. No material, layer, or infill have been documented; this is not for real road signage.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Far Star30: proyecto de microdron FPV

Far Star30: FPV micro-drone project

Far Star30 FPV micro-drone project. The original description mentions a 18650 battery, 1202.5 size motors, a BetaFPV Matrix 1S AIO controller, and a DJI O4 Wide system. The motor figure is written as "11000kw" and the weight is incomplete; these data points are not reinterpreted as confirmed specifications. The long-range designation also does not certify autonomy or flight distance. Preparation, compatibility, and printing Identify the parts of the download and cross-reference the electrical and mechanical compatibility with the documentation of each component. Do not purchase motors or batteries based on the ambiguous figure from the source. A print profile, final weight, and complete assembly list are missing; the sheet must be treated as a project pending validation. Content and design origin The Meshopia download retains farStarWide14.stl and mountCanopy.stl. The author's page identifies the project as an adaptation of the Drone Mini 1S R1 Frame design from MakerWorld. It describes changes in the controller installation and in the mounting of a BetaFPV Meteor 75 Pro 2 canopy. This is a statement by the author, not a fit check performed by Meshopia. The source remains incomplete regarding weight and does not clarify the motor figure.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Protector de cables de motor para dron FPV

Motor cable protector for FPV drone

Part intended to cover the motor cables of an FPV drone along their path over the chassis arm. The source describes this function, but does not identify a compatible frame nor specify length, width, or fastening system. It is not presented as a universal protector nor as certified electrical insulation. Preparation, compatibility and printing Compare the part's channel with the cable bundle and the width of the arm. Check that the fastening does not compress conductors, rub against solder joints, or intrude into the path of the propellers. Prepare a fit test with the equipment turned off. No material or print profile is documented; flexibility and retention must be verified during actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Placa de batería de fondo plano para Tamiya Monster Beetle 2015

Flat-bottom battery plate for Tamiya Monster Beetle 2015

Side closure plate for the Tamiya Monster Beetle battery housing, 2015 re-edition. The author replaced the ribbed inner face with a flat surface to accommodate their battery, which was about 4 mm longer than the space available with the original plates. This measurement describes their specific case and does not guarantee an identical expansion in other units. Preparation, compatibility, and printing The source suggests PETG or PLA and considers increasing the infill to 100% around the holes. Check the length and width of your battery before printing and ensure that the plate or screws do not press against the casing. Check the closure and cable routing with the equipment turned off; do not force a battery that is still too large.

Technology
Sin probar
material
PETG, PLA
Difficulty
Sin especificar
Vista de Extensor de postes de carrocería para Corally Syncro RC

Body post extender for Corally Syncro RC

Extender for the posts that hold the body of an RC car, specifically designed for Corally Syncro. The author developed it while installing two hard-case LiPo batteries in a Syncro 4: the height of the batteries and cables prevented the rear of the body from being correctly positioned. Potential adaptation to other cars requires measuring the post and the fastening. Preparation, compatibility, and printing Check the post diameter, its usable length, and the body retention system. Ensure that the additional height does not leave cables compressed or create excessive gaps. The source does not specify material or printing parameters. Print a fit test before manufacturing the final set and verify that the body remains secured during the suspension travel.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Tapón de escape para motor DLE de 120 cc

Exhaust plug for 120 cc DLE engine

Flexible plug intended for the exhaust of a 120 cc DLE model aviation engine. The source identifies it as a closure for the exhausts and documents a print in TPU with a 10% infill. It does not specify the exact diameter of the exhaust nor does it certify resistance to operating temperature. Preparation, compatibility, and printing Check the fit with the engine stopped and completely cool. When preparing the print, check that the slicer reproduces the walls and the closure without gaps. The TPU and the percentage mentioned come from the author and must be adapted to the filament and the printer. Remove any storage plug before starting the engine; it is not presented as a component to obstruct an exhaust in operation.

Technology
Sin probar
material
TPU
Difficulty
Sin especificar
Vista de Base para arrancador H9 de aeromodelismo

H9 model airplane starter base

Base for placing an H9 starter next to its battery. The preserved documentation mentions a three-cell 2200 mAh LiPo battery in the summary, but mentions two cells in the description. Neither of these electrical configurations is confirmed here: the allowable voltage must be obtained from the actual starter and its documentation. Preparation, compatibility, and printing Measure the starter housing and the slot intended for the battery. The base is a mechanical part; it does not adapt voltages or provide electrical protection for the assembly. Check that the fastening does not press against the battery and leaves the cables free. The source does not specify a print profile; first prepare a dimensional test of the housings.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte mural para coche RC WLtoys 12428

Wall mount for WLtoys 12428 RC car

Bracket identified by the author for hanging a WLtoys 12428 RC car on the wall. The source retains a link to the design on Tinkercad, but does not document allowable load, hardware, or compatible wall types. Therefore, the vehicle's name should not be interpreted as a test of the bracket's strength or its anchors. Preparation, compatibility, and printing Present the bracket with the vehicle and check the contact points and balance before fixing it. Select suitable wall anchors and ensure the car is not held by a fragile part. Check the layer orientation relative to the stress on the arms. No material, infill, or layer height is documented; validate the assembly near the ground before using it for storage.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de luces MEUS para Traxxas UDR

MEUS light bracket for Traxxas UDR

Bracket designed to mount MEUS Racing RC LED lights on a Traxxas UDR. It allows adapting this accessory to the vehicle, but the download corresponds only to the printable part: it does not include lights, wiring, or hardware. The source does not identify all the light variants that might fit. Preparation, compatibility, and printing The author recommends PETG and 100% infill. Keep these details as a reference for their proposal and check the geometry and mounting points with your equipment. Leave enough clearance for the wiring and ensure it is not pinched by the bodywork. After printing, check the holes without forcing the layers and align the assembly before final tightening.

Technology
Sin probar
material
PETG
Difficulty
Sin especificar
Vista de Bmw CE04 rear wheel logo adapter

Bmw CE04 rear wheel logo adapter

Author Description · Vlad Dogarescu (Printables) BMW CE 04 Wheel Logo Adapter A simple 3D-printable adapter that allows you to install a 68 mm BMW wheel emblem on the BMW CE 04, giving the wheels a much more finished, classic BMW look. I originally designed this for my own CE 04 because I felt the stock wheel hubs looked a little too plain. After a few hours of 3D modeling, the first print worked perfectly. What you need - The included 3D-printed adapter - 68 mm BMW wheel emblem/logo - Suitable screws/fasteners for mounting Standard 68 mm BMW emblems are widely available online and are relatively inexpensive. Printing The model is straightforward to print and does not require any particularly exotic settings or materials. For something mounted this close to the wheel and exposed to heat, water and sunlight, I recommend PETG, ASA or ABS rather than PLA. Installation The adapter mounts to the existing wheel hub and provides a holder for the\n68 mm BMW emblem. No permanent modification to the scooter is required. Optional: Floating BMW Logo You can also use a 68 mm floating/self-leveling BMW wheel emblem, which keeps the BMW logo upright while the wheel rotates. These look great, but they are considerably more expensive than standard emblems. Compatibility Designed specifically for the BMW CE 04. If you print it, I'd love to see a photo of how it looks on your CE 04! Source: https://www.printables.com/model/1809889-bmw-ce04-rear-wheel-logo-adapter

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de batería sobre el eje delantero para crawler Hornet

Battery mount on the front axle for Hornet crawler

Mount to place the battery on the front axle of the competition-style Hornet crawler based on CyberBrick. The author indicates that it requires their modified axle, which they call the "wild axle" in the description. It should not be assumed compatible with the standard axle without comparing the parts. Changing the battery position modifies the weight distribution, but does not guarantee a performance improvement on every build. Preparation, compatibility, and printing First identify the axle associated with the design and check the mount's anchor points. Verify steering clearance, articulation, and cables throughout the full range of motion. The housing must hold the battery without compressing it. Battery dimensions, material, and print profile are not specified; those decisions require checking the actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de servo con alojamiento para conector

Servo bracket with connector housing

Mount for a servomotor that incorporates a zone intended for a female servo cable connector. The design aims to house the servo and organize the cable output. The source does not identify a specific servo model or its dimensions, so compatibility must be verified in the file and with the physical component. Preparation, compatibility, and printing The hardware is described as "832" and "832 × 1 3/4"; this notation needs confirmation before purchasing or forcing screws into the part. Compare the position of the lugs and the cable path, and ensure the connector remains accessible. No material or profile is documented. Perform a fit test without powering the servo and keep the arm's range of motion clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Adaptador de antena SMA para RadioMaster TX15

SMA antenna adapter for RadioMaster TX15

Mechanical adapter to mount an SMA antenna instead of the original antenna on a RadioMaster TX15 transmitter. The part solves the physical mounting; it does not convert electrical connectors nor determine which antenna is suitable for the transmitter's frequency and configuration. Preparation, compatibility, and printing Check the exact connector type, its fastening, and the available space before printing. Do not confuse SMA with physically similar variants. Ensure the mount does not strain the coaxial cable or interfere with controls and the casing. The source does not provide material, layer height, or hardware. Follow the transmitter's instructions for any intervention and do not use it with an incompatible antenna.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Buje de rueda KamAZ Dakar RC para hexágono de 12 mm

KamAZ Dakar RC wheel hub for 12 mm hexagon

Wheel hub identified as KamAZ Dakar RC for mounting on RC Trophy axles with a 12 mm hexagon. The hexagon measurement is the compatibility data provided by the source; it does not confirm axle length, pin diameter, wheel offset, or nut type. Preparation, compatibility, and printing Compare the hexagonal seat and the fastening space with your axle and rim. The hexagon must transmit movement without spinning freely or fitting under excessive pressure. Prepare a dimensional test and verify that there is enough thread left for the nut. No material or tested strength is documented; check the hub after the first tests for any signs of play or deformation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hexágonos de rueda V2 para crawler Hornet CyberBrick

Wheel Hexagons V2 for Hornet CyberBrick crawler

Second version of the wheel hexagon adapters for the Hornet crawler based on CyberBrick. The author indicates that four M8 nuts are required for the assembly. The download contains the printed parts and does not include that hardware. Not all compatible axle or rim measurements are specified in the text. Preparation, compatibility, and printing Check the Hornet variant, the nut housing, and the rim fit before printing. Avoid deforming the housing when inserting the nuts and verify that the wheels rotate without rubbing. No material, layer, or infill are documented. After assembly, check retention, clearance, and concentricity before using the vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Ruedas grandes para crawler Hornet CyberBrick

Large wheels for Hornet CyberBrick crawler

Alternative wheels for the CyberBrick-based Hornet crawler, proposed by its author to use different tires. The source does not specify inner diameters, widths, or tire references. The title "large wheels" is descriptive and does not replace a measurement comparison. Preparation, compatibility, and printing Measure the tire seat, the axle, and the clearance from the suspension and bodywork. A larger wheel modifies the available space and may require other parts of the assembly. Maintain the original scale during checking and do not scale to adjust only one diameter without checking the rest. No material or print profile is documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Eje ancho para crawler Hornet compatible con motores N30

Wide axle for Hornet crawler compatible with N30 motors

Wide axle variant for the Hornet crawler based on CyberBrick. The author indicates that it allows the use of N30 motors, which are larger than those in their previous configuration. The publication does not make any N30 motor electrically compatible with the vehicle controller nor does it provide a validated gear ratio. Preparation, compatibility, and printing Check the assembly parts, their housings, and the connection with the wheels before manufacturing. Compare the actual motor and the space required for terminals and wiring. The modification may affect the total width and the suspension travel. No material or print profile is specified; prepare fit tests before assembling the complete axle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Anclaje de tirantes para crawler Hornet CyberBrick

Suspension link mounts for Hornet CyberBrick crawler

Anchor pieces for the suspension rods of the Hornet crawler based on CyberBrick. The author refers to them as "STRONG," but the available documentation does not provide tests to quantify an improvement in strength. They are presented as a mounting variant, not as a certified reinforcement. Preparation, compatibility, and printing Identify the position of each piece and compare holes and supports with the chassis. Check that the ball joints or rods travel through their full angle without touching the anchors. Layer orientation must be studied based on the stresses of the assembly. No material or infill percentage is documented; first validate fit and movement in a static state.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Insertos y tapa baja para estuche Whoopster de 65 mm

Inserts and low lid for 65 mm Whoopster case

Modification of the 65 mm Whoopster case with a lower lid to transport the equipment without the charger. The author includes removable compartments and handles to access the contents without tipping over the box. This is an adaptation of an existing case, not a confirmation that any 65 mm micro-drone will fit. Preparation, compatibility, and printing Check which elements the file contains and which case body you need to keep. Before printing the entire modification, check the clearance of the lid, drawers, and handles. The reduced lid foregoes the charger space according to the source. No printing parameters are documented; avoid trying to fix a stuck drawer by forcing its walls.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Submarino tipo XXI: modelo para proyecto de conversión RC

Type XXI submarine: model for RC conversion project

Type XXI submarine model whose source proposes printing the interior hollow and making modifications to convert it into an RC. This is a base for a naval modeling project, not a complete or dive-ready remote-controlled submarine. No waterproofing, ballast, propulsion, diving mechanisms, or electronics are documented. Preparation, compatibility, and printing Study the file before deciding how to split or hollow it. A printed hull does not guarantee water-tightness, and any transformation must be developed as a separate project. Keep copies of the originals and first define how to access the interior and check joints. No materials or printing settings are documented; no inferred ballast or depth values are added.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de motorreductor N20 con fijaciones de 3 mm

N20 gear motor mount with 3 mm fastenings

Mount to house an N20 gear motor and fasten it to a chassis using two 3 mm screw holes. The source suggests its use in small RC cars, rovers, and robotics projects. The part is a mechanical mount; it does not include the motor, screws, or controller. Preparation, compatibility, and printing Compare the outline of the actual motor and the position of its terminals with the housing. Check that the fastening to the chassis does not deform the mount or block the shaft. The slicer must keep the walls around the drill holes continuous. The source does not provide specific materials or parameters; a first test print helps check tolerances before installing the assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Terminal de amortiguador para Arrma Mojave Grom · ARA-1495

Shock absorber end for Arrma Mojave Grom · ARA-1495

Printable replacement for the Arrma Mojave Grom shock rod end, identified in the title as M2.5. The author created it due to the lack of a spare part and describes it as a provisional solution inferior to the original piece. The commercial reference provided is ARA-1495. Preparation, compatibility, and printing Check the thread, ball joint, and travel before use. Do not force the rod if the print does not accurately reproduce the housing. The source does not provide a profile or durability tests; it must not be presented as an upgrade for the shock absorber. Inspect the end in initial tests and replace any print with cracks or excessive play.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hélice bidireccional experimental de 3 pulgadas para dron

Experimental 3-inch bidirectional propeller for drone

Experimental 3-inch propeller developed as part of an academic project on a drone capable of rolling inside a cage. It uses toroidal-shaped blades and a symmetrical profile to study thrust in both directions. The source includes comparisons and test graphs, but those results do not certify a copy manufactured with another printer, material, or process. Preparation, compatibility, and printing The author describes 0.12 mm layers, supports, and an adhesion edge when printing several units. It expressly warns of the risk of breakage at high revolutions; its published limit should not be interpreted as a guaranteed safe speed. It is not a commercial replacement of universal application. Before attempting any test, consult the documentation and original graphs and use an appropriate protected test bench.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Carcasa Flywoo O4 adaptada para cámara CO3

Flywoo O4 housing adapted for CO3 camera

Housing modified from the Flywoo O4 design to house a CO3 camera. The source indicates a 25.4 × 25.4 mm mounting pattern and mentions M2 screws and threaded inserts. The modification adds material around the camera; the author's claims regarding impacts or vibrations do not equate to protection tested by Meshopia. Preparation, compatibility, and printing The author recommends TPU with supports. Check the removal of those supports and the lens clearance before slicing. Verify the exact camera, the connectors, and the clamp closure without tightening the equipment housing. The length of all screws and a confirmed final weight are not provided; measure the assembly before installing it.

Technology
Sin probar
material
TPU
Difficulty
Sin especificar
Vista de Perfil de ala para proyecto de avión RC

Wing profile for RC airplane project

Aerodynamic profile section identified by its author for an RC airplane. The preserved documentation does not indicate the profile name, the intended chord, the wall thickness, the wing structure, or a flight configuration. It is a starting geometry for studying a project, not a complete wing ready for installation. Preparation, compatibility, and printing Check the dimensions and what volume the file actually contains before printing. To integrate it into a wing, structural and assembly decisions are required that cannot be inferred from the title. No material, orientation, or print profile is documented. Maintain the scale while evaluating the geometry and avoid attributing aerodynamic performance that the source has not specified. The download contains a single file, Part Studio 1 - Part 1.stl. The source, reviewed on September 24, 2026, still does not identify a standardized profile or provide instructions. It can be consulted as a geometric reference, while its validation for a specific project remains pending.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte GoPro y GPS Mini M10 para Manta 5 SE DC

GoPro and GPS Mini M10 Mount for Manta 5 SE DC

Combined mount to mount a GoPro-type camera and a Mini M10 GPS on the Manta 5 SE DC frame. The author describes the GPS housing as a press-fit. This description expresses the design intent and does not guarantee the same fit with different modules, cases, or print tolerances. Preparation, compatibility, and printing Measure your GPS and check the frame variant and camera mount. The module must be held in place without pressing on components or cables. Check the connector space and camera orientation before printing. The source does not provide a print profile or complete hardware; perform a test of the housings before final assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Extensor de stick para mando 8BitDo y simulación de drones

Stick extender for 8BitDo controller and drone simulation

Stick extender identified in the title for an 8BitDo controller and drone control. The source does not specify the exact model of the controller or its coupling measurements. It should be understood as a mechanical accessory for the stick, without attributing communication functions or electronic compatibility. Preparation, compatibility, and printing The author requests the use of supports, but does not provide material or other parameters. Check the housing with your controller and ensure that the piece allows for the full range of motion without touching the casing. Remove the supports without opening or deforming the hooks. Validate the fit before use and recalibrate the simulator if it changes your way of actuating the stick.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de antena para bastidor HGLRC MY5

Antenna mount for HGLRC MY5 frame

Identified antenna mount for the HGLRC MY5 frame. The original description does not provide dimensions or a list of compatible antennas and connectors. The source tags mention various FPV systems, but these are not enough to ensure that all fit on the same part. Preparation, compatibility, and printing Compare the mounting points, housing diameter, and connector space with your frame. Check that the coaxial cable is not forced and that the antenna remains outside the path of the propellers. No material or print profile is documented. A fit test allows checking the retention before installing the electronics.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Emblema decorativo ALIGN para equipo de radiocontrol

ALIGN decorative emblem for radio-controlled equipment

Decorative emblem with the name ALIGN, proposed by its author for cases and other RC equipment elements. It is a customization piece; it is not a flight component nor does it certify that equipment is original, approved, or has a commercial relationship with the brand. Preparation, compatibility, and printing Check the size of the letters and the target surface before printing. Maintain a uniform first layer to preserve edges and internal spaces. If you change the scale, check that the laminer continues to trace narrow details. Material, adhesive, layer, or infill are not documented; the fastening system must be chosen for the specific surface.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Pieza de sujeción del conector de batería para Air65

Battery connector mounting piece for Air65

Replacement plastic part for the connector area of a battery used in an Air65. The author developed it after breaking the original part during an intervention. The publication does not identify the exact battery nor provide an electrical repair procedure, so it is not presented as a universal spare part nor as an instruction for opening a cell. Preparation, compatibility, and printing Check the connector geometry and the available space with the equipment disconnected. The print must not compress the battery, expose contacts, or replace damaged insulation. No material or printing parameters are specified. If the battery is damaged, the printed part does not make it safe or suitable for continued use.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Visaton FRS 7 S Speaker Mount for Tamiya Scania 770S

Mount to house a Visaton FRS 7 S speaker in the roof module of a Tamiya Scania 770S. The source describes four mounting points for the speaker, a reinforcement frame, and a side exit for wiring. It suggests a layer of foam or a TPU ring between the speaker and the mount to dampen vibrations. The speaker and these auxiliary elements are not part of the printable piece. Preparation, compatibility, and printing The author recommends PETG or ABS, 30–40% infill, and 100% local reinforcement on the screw turrets. Check dimensions and drill holes against the actual speaker and roof; the approximate measurement of 72 mm cited in the source does not replace that check. Assemble the unit before tightening and keep the cable free from pinches. The acoustic improvements described by the author have not been verified here through testing.

Technology
Sin probar
material
PETG, ABS
Difficulty
Sin especificar
Vista de Estuche sencillo para Beacon y joysticks HOVERAir X1 Pro/ProMax

Simple case for Beacon and joysticks for HOVERAir X1 Pro/ProMax

Identified carrying case or holder for the Beacon and the joysticks of the HOVERAir X1 Pro/ProMax. The source aims to keep these accessories together and facilitate their preparation. It does not document protection against impacts, water, or dust, nor does it claim to be suitable for transporting the complete drone. Preparation, compatibility, and printing Check which accessories fit into the housings and check their removal before printing. The fit must hold them without pressing buttons or connectors. No material, layer, or infill is documented. An initial test of the cavities will allow checking tolerances without assuming that all revisions of the accessories share the same dimensions.

Technology
Sin probar
material
—
Difficulty
Sin especificar