MESHOPIAScale modelling & RC5 tagged models · Page 1 of 1
This model is a mount designed for the Traxxas Slash 4x4. It is intended to fit the HCG chassis and the Copperhead ESC. Practical uses include mounting a Copperhead ESC within an HCG chassis on a Traxxas Slash 4x4 platform. Included files: traxasslashhcgcopperheadescmount.stl
Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.
Traxxas receiver box seal TRA3629 Purpose This model is a replacement seal designed for Traxxas receiver boxes. It serves as a gasket to help maintain the integrity of the receiver compartment. Practical Uses It is compatible with several Traxxas models, including the Slash 4x4, Stampede 4x4, Bandit, Rustler, Stampede, and Spartan. It is intended for use in applications requiring a waterproof seal for the receiver box. Included Parts - 1 x Traxxas receiver box seal (traxxas rustler receiver box seal-Body.stl) Printing/Assembly Guidance According to the source, this part is intended to be printed in TPU.
Traxxas Slash 2WD Motor Holder Purpose This model is designed to hold a Titan 550 12T RC motor securely during maintenance or initial use. It provides a stable base for the motor while it is being cleaned or during the break-in process. Practical Uses It serves as a dedicated stand for hobbyists working on Traxxas Slash 2WD setups, ensuring the motor remains upright and stationary during cleaning tasks or while running through its break-in period. Included Parts - single vent motor stnad.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.
Traxxas 2wd Wheelie Bar Purpose This is a fully printable wheelie bar designed for Traxxas 1/10 scale 2wd cars and trucks. It is intended to provide a 35-45 degree angle depending on the specific vehicle, while remaining tucked closer to the body. Practical Uses This model is compatible with RPM and Stock bumper mounts for vehicles including the Traxxas Bandit, Rustler, Stampede, and Slash. It is designed to be a replaceable part that can be reprinted if worn down or broken during use. Included Parts - wheelie center bar.stl - Side Bracket.obj - Wheelie Bar.3mf - Wheel.stl Printing and Assembly Guidance For printing, the creator used PETG with a layer height of 0.15mm to 0.20mm, 6 sides, 70% infill, and supports generated from the print bed only. Assembly requires six 3mm screws. It is recommended to use screws between 15mm and 20mm long, though 10mm screws can be used if necessary.