Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

4 tagged models · Page 1 of 1

#gps

Discover 3D models tagged gps and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Soporte GoPro y GPS Mini M10 para Manta 5 SE DC

GoPro and GPS Mini M10 Mount for Manta 5 SE DC

Purpose This mount is designed for the Manta 5 SE DC frame to combine a GoPro mount and a dedicated Mini M10 GPS holder into a single lightweight component. Practical Uses The GPS compartment is sized for the Mini M10 GPS module to provide a press-fit, securing the GPS in place for a compact setup without requiring foam or zip ties. Included Parts - MANTA-5-SE-DC_M10_Mini_GPS_Unit.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount

SpeedyBee Mario5 DC 25mm GPS Mount Purpose This model is designed as a rear end mount specifically for the SpeedyBee Mario5 DC. It serves as a structural component to hold various electronic connections and modules in place at the rear of the frame. Practical Uses This mount provides dedicated support for an XT60 plug, dual SMA connectors intended for the O4 pro, and a 25mm x 25mm GPS unit. Included Parts - MARIO5-TPU-XT60_DJI_2_GPS.stl Printing and Assembly Guidance The author recommends printing this model in TPU. When printing, use supports; the author notes that the supports should come off easily.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Antenna Mount GPS VTX ELRS HGLRC MY5

Antenna Mount GPS VTX ELRS HGLRC MY5

Antenna Mount GPS VTX ELRS HGLRC MY5 Purpose This model is designed as a multi-purpose antenna mount intended for FPV drone configurations. It provides dedicated mounting points for GPS modules, Video Transmitters (VTX), and ExpressLRS (ELRS) antennas. Practical Uses It is used to secure essential electronic components and antennas on an RC aircraft, specifically compatible with HGLRC MY5 setups. The design supports various FPV systems including DJI and Walksnail. Included Parts The digital file provided is a .3mf file named tpumount.3mf. Printing and Assembly Guidance The author specifies that the material used for this mount is TPU (Thermoplastic Polyurethane).

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount

GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount

This model is a remixed camera mount designed for the GEPRC Cinebot 30. It features an integrated mount for the TBS M8.2 GPS module. Practical uses include mounting a GoPro (versions 8, 9, 10, 11, or 12) or a DJI Action 2 to the drone, alongside a GPS module. Included files: - Cinebot30 Camplate Gopro GPS.STL - Cinebot30 Camplate Gopro GPS_0.15mm_PETG_MK3S_1h35m.gcode Printing guidance: The source suggests printing with PETG at a 0.15mm layer height and 100% infill using supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar