6 tagged models · Page 1 of 1

#esc

Discover 3D models tagged esc and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Carcasa tubular para variador de coche RC de drift 1:10

RC & MecánicaFree

Tubular housing for 1:10 scale RC drift car ESC

Tubular housing designed for an electronic speed controller (ESC) of a 1:10 scale drift car. The author uses PETG and clarifies that the piece shown in their photograph has been polished. They do not identify the specific ESC model nor do they provide information regarding universal compatibility, a degree of waterproofing, or a cooling function. Preparation, compatibility, and printing Compare the internal dimensions with your ESC and reserve space for connectors and cables. Also, check that the housing does not obstruct the necessary ventilation for the equipment. Polishing is a post-processing finish, not an automatic property of the print. The source does not specify layer height, infill, or orientation; prepare a fit test before installing the electronics.

Technology: Sin probar
material: PETG
Difficulty: Sin especificar

Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

RC & MecánicaFree

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

FC 9imod F722 + ESC 4in1 60A

Purpose This model provides a digital representation of the 9imod F722 flight controller paired with its 60A 4in1 ESC. The model includes the main electronic micro-components to facilitate integration into larger design projects. Practical Uses The model is intended for use in digital projects where the physical dimensions and presence of the 9imod F722 flight controller and ESC are required for spatial planning or assembly visualization. Included Parts - 9imod F722 + ESC 4in1 60A.stl - 9imod F722 + ESC 4in1 60A.step

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Traxxas Stampede GoolRC 60A ESC Holder

Traxxas Stampede GoolRC 60A ESC Holder Purpose This model is a replacement ESC holder designed specifically for the Traxxas Stampede equipped with a Titan 12T brushed motor. It serves as a mounting solution for the electronic speed controller. Practical Uses It allows for the direct mounting of the ESC to the original Traxxas ESC mount on the Stampede chassis, facilitating repairs or component upgrades. Included Parts - GoolRC 60A ESC Holder Traxxas Stampede (.obj) - GoolRC 60A ESC Holder Traxxas Stampede (.stl)

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Gspeed Battery and ESC Tray

Gspeed Battery and ESC Tray Purpose This model is a remix of a previous design (Thingiverse 5371876) intended to modify the internal compartment of a battery and ESC tray. The primary goal of this redesign is to increase the available space within the ESC section to accommodate a Copperhead ESC. Practical Uses This tray is designed for use in Gspeed RC applications where a standard tray does not provide sufficient clearance for a Copperhead ESC. The modification includes a slightly dropped bottom to provide additional depth for component fitment. Included Parts - batterytraynewfit.stl Printing and Assembly Guidance Not provided in the source text.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

TRX4 custom ESC mount

TRX4 custom ESC mount Purpose This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias. Practical Uses It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance. Included Parts - 1x ESC mount (ESC_mount.stl) Assembly Guidance To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.

Technology: Sin probar
material: —
Difficulty: Sin especificar