7 tagged models · Page 1 of 1

#protector

Discover 3D models tagged protector and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Rear corner protector for Arrma Senton

Accessory designed to cover the rear corners of an Arrma Senton body. The source presents it as a protector for those areas; the download corresponds to the printable part and not to a complete body. It does not specify the Senton version, the mounting method, or impact resistance tests. Preparation, compatibility, and printing Compare the part's outline with the corners of your body and check the clearance relative to the wheels and suspension. Before preparing the final print, check the support faces and potential overhangs in the slicer. The material and orientation must be chosen based on the desired fit and flexibility; there are no documented print settings that can be copied as a validated profile.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Protector de cables de motor para dron FPV

RC & MecánicaFree

Motor cable protector for FPV drone

Part intended to cover the motor cables of an FPV drone along their path over the chassis arm. The source describes this function, but does not identify a compatible frame nor specify length, width, or fastening system. It is not presented as a universal protector nor as certified electrical insulation. Preparation, compatibility and printing Compare the part's channel with the cable bundle and the width of the arm. Check that the fastening does not compress conductors, rub against solder joints, or intrude into the path of the propellers. Prepare a fit test with the equipment turned off. No material or print profile is documented; flexibility and retention must be verified during actual assembly.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

RC & MecánicaFree

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

DJI FPV Remote Controller 3 stick protector

DJI FPV Remote Controller 3 stick protector Purpose This model serves as a simple protector for the DJI FPV Remote Controller 3 sticks. Practical Uses It is designed to act as a gimbal lock for the controller's joysticks. Included Parts - DJI Controller 3 gimble lock v3.stl Printing and Assembly Guidance For optimal results, use a 0.4mm nozzle. The author recommends printing the model in either PLA or ABS. Please note that this model requires supports during the printing process.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

DJI FPV Remote 3 Controller Travel Cover and Protector

DJI FPV Remote 3 Controller Travel Cover and Protector Purpose This minimalist, ultralight snap-on protector is designed to safeguard the sticks and gimbals of the DJI FPV Remote 3 from damage while stored in a bag. By utilizing a snap-on design rather than a full case, it aims to reduce overall packing bulk. Practical Uses It is intended for travelers or users who want to protect their controller's sensitive components without the weight or volume of a traditional hard case. The stick shields are specifically designed to accommodate sticks that are wider and longer than the official DJI sticks. Included Parts - DJI Controller 3 Cover.stl Printing and Assembly Guidance To ensure structural integrity, it is recommended to print the model sideways with the gimbal sticks positioned on top of each other; this ensures layer lines are strong in the direction the arms flex. For better performance under flex, the author recommends using a stronger material, such as PETG-GF/CF.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

FC Corner Protector for 30mm table plate

This model serves as a corner protector and a holder for 2020 profile outlines, specifically designed for a Prusa enclosure. It is intended for use with a 30mm table plate. Practical uses include protecting the corners of the enclosure and providing a structured way to hold the 2020 profile outlines in place. The provided files include two versions: FC_Corner_Protector-V1.2.3mf and FC_Corner_Protector-V2.2.3mf.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

CR-10 Smart Pro Screen Cover/Protector

Cr 10 Smart Pro Screen Cover/Protector Purpose This model is a screen cover/protector specifically designed for the CR-10 Smart Pro printer. Practical Uses It serves as a protective layer for the printer's screen to help prevent damage or wear. Included Parts - Screen cover v2.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source documentation.

Technology: Sin probar
material: —
Difficulty: Sin especificar