Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

2 tagged models · Page 1 of 1

#base

Discover 3D models tagged base and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Base para arrancador H9 de aeromodelismo

H9 model airplane starter base

Base for placing an H9 starter next to its battery. The preserved documentation mentions a three-cell 2200 mAh LiPo battery in the summary, but mentions two cells in the description. Neither of these electrical configurations is confirmed here: the allowable voltage must be obtained from the actual starter and its documentation. Preparation, compatibility, and printing Measure the starter housing and the slot intended for the battery. The base is a mechanical part; it does not adapt voltages or provide electrical protection for the assembly. Check that the fastening does not press against the battery and leaves the cables free. The source does not specify a print profile; first prepare a dimensional test of the housings.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Generic base for adaptations Sunlu S2 (CR-10S Pro filament sensor version) DO NOT USE!! Files: Adapter.stl, adapter.step

Generic base for adaptations Sunlu S2 (CR-10S Pro filament sensor version) DO NOT USE!! Files: Adapter.stl, adapter.step

This model serves as a generic base designed for various adaptations on the Sunlu S2. Its primary purpose is to move a filament sensor closer to the Sunlu S2 printer. Practical uses include mounting a filament sensor, specifically the version designed for the CR-10S Pro. However, the author notes that this specific version may not be perfectly aligned for all sensors. The base is designed to be used with Voron M3 inserts, though this can be modified. Included parts: - Adapter.stl - adapter.step Printing and assembly guidance: The author reports that the fit is very tight and snaps into place. Because the design is tight and may require alignment adjustments, the author provides the .step file to allow users to modify the holes for a custom, adaptable base. If using the design as-is, the author advises adding at least 0.5-1mm to the extended arm and fixing the hole distance. Additionally, changing all holes by 0-1mm may assist with alignment, though the design does not add pressure to the filament itself.

Technology
Sin probar
material
—
Difficulty
Sin especificar