8 tagged models · Page 1 of 1

#rc accessory

Discover 3D models tagged rc accessory and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Whisbang RC whistling bombs

Whisbang is a whistling accessory for RC activities. Its hollow body and openings are intended to produce sound as it moves through the air; it has no explosive function. POSSIBLE USES - Add an acoustic effect to a controlled RC demonstration. - Explore airflow and resonant cavities in a hobby model. INCLUDED FILES - The supplied STL geometry. - The accompanying PDF document. GENERAL PRINTING SUGGESTIONS PLA is a straightforward material for an initial trial. Consider PETG, ASA or another material only when the intended environment requires different heat resistance, outdoor durability or toughness. A 0.20 mm layer height is a general starting point; a finer layer may improve surface detail. Choose a stable printing face and inspect overhangs, bridges and support requirements in the slicer. Print a sample or fit test before making multiple copies. CHECK BEFORE USE Do not add pyrotechnics or explosive loads. Avoid dropping or launching the accessory toward people, animals or property, and follow the rules of the RC flying field. The imported listing indicates FDM with PLA or PETG; these general suggestions must be checked against the actual model, printer and slicer profile. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology: FDM
material: PLA, PETG
Difficulty: Intermedia

RC & MecánicaFree

Drift Ring for MJX Hypergo 1430x 1/14 Scale RC Car

Drift ring for MJX hyper go 1430x 1/14 rc car

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Model Waterproof Pushrod Boot (Vase Mode Printing Required)

RC model waterproof boot vase mode Purpose This model is a waterproof boot designed to protect pushrods on an RC model. Practical Uses It is used to seal pushrod areas against water ingress. For a tighter seal at the exit part, the user can adjust the size by scaling the model or modifying the line width within the slicer. The author notes that applying silicone grease can result in quieter and smoother operation. Included Parts - Boot.stl Printing and Assembly Guidance To achieve waterproofing, the author recommends printing the model in vase mode. The material used for the provided example was Geeetech Black TPU 95A. For installation, the part can be fixed in place using superglue.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

GoPro Mount for Tarmo 5 RC Car

GOPRO Mount for Tarmo 5 RC CAR Purpose This model is a GoPro mount specifically designed to utilize the existing holes on the Tarmo 5 RC Car, allowing for camera integration on the vehicle. Practical Uses It is intended for mounting a GoPro camera to a Tarmo 5 RC car for capturing footage during operation. Included Parts - GoPro mount for Tarmo5.step - GoPro mount for Tarmo5.stl Printing and Assembly Guidance The author suggests printing the model in the recommended orientation to achieve maximum strength. Additionally, the use of strong supports is recommended during the printing process.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Moda y accesoriosFree

Shovel RC accessory

This model is an RC accessory shovel designed specifically for use with an RC crawler. It serves as a scale detail component to enhance the realism of remote-controlled off-road vehicles during simulated terrain navigation or recovery scenarios. Practical uses include adding aesthetic scale realism to crawler builds or using the tool as a prop for scale dioramas and trail driving. Included parts: - Shovel.stl Printing and assembly guidance: No specific printing parameters or assembly instructions are provided in the source documentation.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Raised-Side Roof Basket for 1:10 RC Vehicles - Two Variants

Add a roof basket detail to a 1:10 RC vehicle. The model has a rectangular platform with elongated open slots, rounded perimeter rails, upright side supports and circular features along one side. The source photograph shows the basket mounted above an off-road-style RC body. The download contains the basket geometry only. Two STL variants are supplied, originally labeled 12x15cm and 12x16.5cm. They have been renamed 01-roof-basket-12x15-label.stl and 02-roof-basket-12x16-5-label.stl. These sizes are source labels rather than independently verified installed dimensions; inspect and measure the files in your slicer before selecting a variant. Both files retain their original geometry. The vehicle, cargo and separate fastening hardware are not included. The package does not document a specific mounting procedure, verified fit to a named vehicle, load rating or tested printing settings. Compare the basket footprint and attachment features with your own body before printing. Select orientation, supports and material for your intended use. Its color, surface finish, lighting and background illustrate a possible appearance.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Twin-Outlet Muffler Detail for an MST E30 RC Drift Body - STL

Add a twin-exhaust visual detail to a suitable MST E30 RC drift-car body. The supplied photograph shows the accessory beneath the rear bodywork. Inspection of the actual STL shows a rounded muffler housing, two curved outlet tubes with open ends, and an angular mounting bracket with reinforcing ribs. This is a decorative RC body accessory. One STL is included, renamed 01-e30-twin-outlet-muffler.stl without changing its geometry. The model contains the muffler and its integrated mounting form. The vehicle, body shell and attachment hardware shown or implied by the reference are not included. No scale is independently established by the supplied folder or filename. Compare the mounting bracket and outlet clearance with your intended body before printing. Compatibility beyond the source MST E30 label, mounting method and physical fit have not been tested by MESHOPIA. Choose material, orientation and supports after inspecting the hollow outlets and bracket in your slicer. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Three-Channel Wire Clip for RC Cars - 14 AWG Source Label - 3MF

Keep three insulated wires together with this compact RC cable clip. Inspection of the original 3MF shows a solid rectangular body with three round, open-sided channels. The supplied photograph shows two clips grouping three wires inside an RC vehicle; the download contains one clip model. One original 3MF is included, renamed 01-three-channel-wire-clip.3mf. Its mesh and project contents are preserved. Wires, electronics and the vehicle shown in the reference are not included. No assembly of separate printed parts is required for the clip itself. The source filename identifies 14 AWG wiring. This is a source label, rather than an independently measured fit specification: insulation thickness varies, so compare the actual channels with your wire diameter before printing. Retention, material flexibility and suitability for your installation have not been physically tested by MESHOPIA. Inspect orientation and supports in your slicer and choose a material appropriate for the installation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar