Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

16 tagged models · Page 1 of 1

#battery

Discover 3D models tagged battery and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Placa de batería de fondo plano para Tamiya Monster Beetle 2015

Flat-bottom battery plate for Tamiya Monster Beetle 2015

Side closure plate for the Tamiya Monster Beetle battery housing, 2015 re-edition. The author replaced the ribbed inner face with a flat surface to accommodate their battery, which was about 4 mm longer than the space available with the original plates. This measurement describes their specific case and does not guarantee an identical expansion in other units. Preparation, compatibility, and printing The source suggests PETG or PLA and considers increasing the infill to 100% around the holes. Check the length and width of your battery before printing and ensure that the plate or screws do not press against the casing. Check the closure and cable routing with the equipment turned off; do not force a battery that is still too large.

Technology
Sin probar
material
PETG, PLA
Difficulty
Sin especificar
Vista de Soporte de batería sobre el eje delantero para crawler Hornet

Battery mount on the front axle for Hornet crawler

Mount to place the battery on the front axle of the competition-style Hornet crawler based on CyberBrick. The author indicates that it requires their modified axle, which they call the "wild axle" in the description. It should not be assumed compatible with the standard axle without comparing the parts. Changing the battery position modifies the weight distribution, but does not guarantee a performance improvement on every build. Preparation, compatibility, and printing First identify the axle associated with the design and check the mount's anchor points. Verify steering clearance, articulation, and cables throughout the full range of motion. The housing must hold the battery without compressing it. Battery dimensions, material, and print profile are not specified; those decisions require checking the actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Pieza de sujeción del conector de batería para Air65

Battery connector mounting piece for Air65

Replacement plastic part for the connector area of a battery used in an Air65. The author developed it after breaking the original part during an intervention. The publication does not identify the exact battery nor provide an electrical repair procedure, so it is not presented as a universal spare part nor as an instruction for opening a cell. Preparation, compatibility, and printing Check the connector geometry and the available space with the equipment disconnected. The print must not compress the battery, expose contacts, or replace damaged insulation. No material or printing parameters are specified. If the battery is damaged, the printed part does not make it safe or suitable for continued use.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Battery Cover for Nikko Remote Control #94150

Battery Cover for Nikko Remote Control #94150

This model is a replica battery cover designed for the Nikko Remote Control #94150. It was created to serve as a replacement part for users who have lost the original cover. 1. Purpose: To provide a replacement battery compartment cover for the Nikko Remote Control #94150. 2. Practical Uses: Restoring the battery compartment functionality of a Nikko RC remote control. 3. Included Parts: One STL file containing the Battery Cover for Nikko Remote Control 94150. 4. Printing/Assembly Guidance: The author specifies that supports are required during the printing process to correctly form the screw hole and the small insert located on the back of the model.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Fusion Switch Battery Cover

Fusion Switch Battery Cover

Fusion Switch Battery Cover Purpose This model is designed to serve as a battery cover for a Hobbywing Fusion, specifically intended to hide the switch from view to enhance scale realism. Practical Uses It is used in RC scale modeling, such as a Toyota Pickup build, to conceal electronic components. A mirrored version is included to allow for mounting the battery on the driver side. Included Parts - Batt_Boden.stl - Batt_Deckel.stl - Batt_Deckel_Mirrored.stl Printing and Assembly Guidance To assemble, print the "Boden" part and select the appropriate "Deckel" version. The components are held together using two clips. For increased scale detail, the author suggests placing small wires into the small holes located on the battery poles.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de SCX24 battery tray

SCX24 battery tray

This model is an SCX24 battery tray designed to lower the battery position within the vehicle. 1. Purpose: The primary function of this part is to reposition the battery lower in the chassis of the SCX24. 2. Practical Uses: It is intended for use in Axial SCX24 RC crawlers to modify the battery mounting height. 3. Included Parts: The download includes one file: Part Studio 1 - battery (1).stl. 4. Printing/Assembly Guidance: No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Battery Anti-Shifting Box

RC Battery Anti-Shifting Box

RC Battery Anti Shifting box Purpose This model is designed to keep LiPo batteries from moving around during flight, providing stability and protection for the battery. Practical Uses These boxes serve as holders for RC batteries to prevent shifting while in use. The author provides two specific sizes to accommodate different battery configurations: - Small: Suitable for smaller battery dimensions. - Large: Designed for a 3 Cell 2200 battery, with a mention of 4 Cell 5200 compatibility. Included Parts - 109x38x13 MM Lipo Battery Box Small.stl - 137x48x15 MM lipo battery box Large.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Gridfinity Battery CR LR - Max (CR2032, CR2016, CR1620, LR44, LR1130, LR626, LR43) Bin

Gridfinity Battery CR LR - Max (CR2032, CR2016, CR1620, LR44, LR1130, LR626, LR43) Bin

Purpose This model is a 2x2 Gridfinity bin designed specifically for the organized storage of various button cell batteries. It provides a compact solution for managing small battery types within a Gridfinity-compatible organizational system. Practical Uses The bin is sized to fit a 2x2 Gridfinity grid and is compatible with several specific battery types, including: - CR2032 (Ø 20 mm × 3.2 mm) - CR2016 (Ø 20 mm × 1.6 mm) - CR1620 (Ø 16 mm × 2.0 mm) - LR44 (Ø 11.6 mm × 5.4 mm) - LR1130 (Ø 11.6 mm × 3.1 mm) - LR626 (Ø 6.8 mm × 2.6 mm) - LR43 (Ø 11.6 mm × 4.3 mm) Included Parts The listing includes one STL file: CrMax2x2x2.stl. Printing/Assembly Guidance The author utilized the Fusion360 Gridfinity extension to generate the bin base.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Q903 /Q905 18650 Battery Mod

Q903 /Q905 18650 Battery Mod

Q903 / Q905 18650 Battery Mod Purpose This modification is designed for the Hosim Q903 and Q905 RC cars. It allows users to upgrade from stock batteries to 2s (7.4V) 18650 Li-ion battery packs, providing increased capacity and greater flexibility. Practical Uses This mod is ideal for users seeking longer run times and easier battery swaps. The holder is designed to securely hold standard 18650 cells and fits the vehicle chassis with minimal changes required. Included Parts - Q905Battery_Holder.stl - Base.stl Printing and Assembly Guidance To assemble, use a couple of small self-tapping screws to secure the base to the holder. The hold downs for the elastic require a quick cut with a hobby knife during installation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Battery Holder for 5 Batteries

RC Battery Holder for 5 Batteries

This model is a specialized holder designed to organize and store RC batteries. It is specifically intended for 350mAh RC model batteries, providing a dedicated space to keep multiple units in one location. Purpose The primary purpose of this model is to serve as an organizer for RC model enthusiasts, allowing for the orderly storage of battery packs to prevent clutter and ensure easy access during hobby activities. Practical Uses This holder is useful for RC model builders and hobbyists who need to manage their power supplies. It is designed to hold up to 5 RC batteries simultaneously, making it suitable for workshop organization or field use. Included Parts The package includes one STL file: RC Akku 5 fach fertig.stl. Printing and Assembly No specific printing or assembly guidance is provided in the source documentation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Traxxas Sledge battery spacer

Traxxas Sledge battery spacer

Traxxas Sledge Battery Spacer Purpose This model is a replacement part designed to substitute for a lost battery spacer foam block in a Traxxas Sledge. Practical Uses It serves as a spacer within the RC truck to secure the battery in place, mimicking the function of the original foam component. Included Parts - traxxas sledge battery spacer-Body.stl Printing and Assembly Guidance The author suggests printing this part using TPU material. To achieve a level of compression or "squish" similar to the stock foam part, it is recommended to use 30% infill with seams.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Battery box

RC Battery box

RC Battery box Purpose This model is designed to serve as a protective enclosure for a specific RC battery configuration. Practical Uses It is intended for use in remote-controlled (RC) applications to house and secure a 3s 1300mAh battery. Included Parts - krabicka baterie.3mf Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Lipo Volt Check Holder

Lipo Volt Check Holder

Purpose This model is a small holder designed to secure a battery voltage checker in place to prevent it from moving while using an RC. Practical Uses The holder can be glued to various surfaces for mounting. It can be used without screws, though screws can be used if desired. The author notes that the fit is easy if the part is not painted, but becomes a hard fit if paint is applied. Included Parts - volt check holder.stl Printing/Assembly Guidance The part measures 30x16x17mm. It is designed to be glued anywhere.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Battery cover for Nikko RC controller

Battery cover for Nikko RC controller

This model is a replacement battery cover designed for Sears/Nikko RC controllers. It serves as a functional substitute for lost original components to secure the battery compartment of an RC truck. Practical uses include restoring the battery housing on compatible Nikko or Sears remote control units. The designer notes that while the model is functional, it is a basic design that may be refined or improved by other users. Included parts: - 1 x nikko.stl Printing and assembly guidance: According to the designer, the model was printed using black PLA with normal temperature settings. The recommended print settings include 20% infill and the use of supports. The print consumed approximately 10g of filament and was produced on a Creality CR6-SE.

Technology
Sin probar
material
—
Difficulty
Sin especificar