Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

14 tagged models · Page 1 of 1

#servo

Discover 3D models tagged servo and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Brazo de recambio para servomotor MG995

Replacement arm for MG995 servomotor

Printable arm or horn to replace the output attachment of an MG995 servomotor. It is a coupling piece between the servo shaft and the mechanism to be moved; it does not include the servomotor or the control rod. The compatibility indicated by the source is limited to the MG995 and must be verified with the specific unit, especially regarding the central splining and the fastening. Preparation, compatibility, and printing The author suggests a 50% infill. This data does not certify the strength of a particular print. Before assembling, check that the splining fits without force, that the screw holds the piece, and that the arm does not rub during the entire range of motion. Prepare a fit test first and avoid compensating for an incorrect fit by tightening the screw further.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de servo con alojamiento para conector

Servo bracket with connector housing

Mount for a servomotor that incorporates a zone intended for a female servo cable connector. The design aims to house the servo and organize the cable output. The source does not identify a specific servo model or its dimensions, so compatibility must be verified in the file and with the physical component. Preparation, compatibility, and printing The hardware is described as "832" and "832 × 1 3/4"; this notation needs confirmation before purchasing or forcing screws into the part. Compare the position of the lugs and the cable path, and ensure the connector remains accessible. No material or profile is documented. Perform a fit test without powering the servo and keep the arm's range of motion clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Arrma Grom Typhon Servo Arm

Arrma Grom Typhon Servo Arm

Arrma Grom Typhon Servo Arm Purpose This model is a replacement servo arm designed for the Arrma Typhon Grom. It was created as an alternative to purchasing an original part after the stock component broke. Practical Uses It is intended for use in RC steering systems to restore functionality to an Arrma Typhon Grom vehicle. Included Parts - Arrma Grom Servo Arm v3.stl Printing and Assembly Guidance The author used PLA for the print. Regarding assembly, the specified order is to place the arm on first, followed by a tiny spring, and then the screw. The author notes uncertainty regarding the long-term durability of the part.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Dynam C-47 / DC-3 servo cover

Dynam C-47 / DC-3 servo cover

Dynam C-47 / DC-3 servo cover Purpose This model is designed to serve as a cover for servos. Practical Uses It is intended for use with Dynam C-47 or DC-3 RC planes to protect or conceal the servo components. Included Parts - dymam c47 sero cover.3mf Printing and Assembly Guidance The author recommends printing with a 0.15 layer height to reduce flimsiness. The part can be flipped to be used on the opposite side.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Pan and Tilt Assembly FPV

Pan and Tilt Assembly FPV

Purpose This is a dual servo control pan and tilt assembly designed for FPV cameras. The design features a tight form factor and lacks pre-drilled mounting holes to accommodate a wide range of camera models, allowing users to add custom mounting points to the axis. Practical Uses The assembly is intended for use in RC planes or FPV setups to provide remote movement of a camera. Included Parts - Full Assmbly.stl - Spinning Servo Mount.stl - 2 of same gear for tilt.stl - Servo.stl - Fpv Axil_.stl - Support mount for Pan.stl - Rubber Band.stl - NEw attectpt v52.stl - Small Pully_.stl - Bottom Plate.stl - Main Pully Pivot_.stl - Servo Mount_.stl - Runcam.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Servo Tray for Standard Size RC Servo

Servo Tray for Standard Size RC Servo

Servo Tray for Standard Size RC Servo Purpose This model is designed to serve as a mounting tray for a standard-sized RC servo. It provides a structured housing to secure the servo within an aircraft or model setup. Practical Uses Based on the provided tags, this tray is intended for use in RC aircraft applications, specifically for controlling components such as rudders, ailerons, flaps, or elevators. It is compatible with various servo brands including Spektrum, Futaba, Hitec, HPI, and Savox. Included Parts The package consists of three files: - Cover.3mf - Tray.3mf - Jig.3mf Assembly and Printing Guidance The set includes a specialized jig designed to assist with the installation process. This jig is intended to be used to drill and cut the necessary holes for proper fitment.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1 Purpose This model is an axle servo mount designed specifically to fit the stock axles of the Vaterra Ascender. Practical Uses It is intended for use in RC crawler applications to secure a servo to the Vaterra Ascender axle assembly. Included Parts - Vaterra Ascender Axle Servo Mount.3mf Printing and Assembly Guidance To print this model, it should be laid face down with the use of supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Servo Clevis

RC Servo Clevis

RC SERVO CLEVIS Purpose This model is a clevis designed for use with a 1.2mm pin and push rod. It is intended for applications involving SG90 servos or control horns. Practical Uses This component is designed for RC plane assembly, specifically for connecting control surfaces via servo linkages. Included Parts - 1 x rc clevis 1.2mm.stl Printing and Assembly Guidance The author recommends using PETG as the printing material. For optimal results, use a layer height of 0.2mm. According to the author, printing time is approximately 4 minutes for one piece or 25 minutes for ten pieces. Attribution: tahlo

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Servo Wire Strap

RC Servo Wire Strap

RC Servo Wire Strap Purpose This model is designed to tame and secure RC servo wires. The part utilizes a support structure that creates a pattern intended to lightly grip the wires in place. Practical Uses It is used in radio control applications to organize and manage servo wiring. Included Parts - wire bracket.stl - Requires an M1.5 screw for use. Printing and Assembly Guidance The author suggests printing 5, 6, or more units at a time due to their small size. When necessary, the brim should be peeled off. Suggested print settings: - Print Quality: 0.12 SUPER - Build Plate Adhesion: Brim - Brim Line Count: 4 - Generate Support: TRUE - Z Seam Alignment: Random - Infill Density: 100%

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Modified Steering Bar to fit DS3218 Servo

Modified Steering Bar to fit DS3218 Servo

Purpose This is a modified steering bar designed to better fit the dimensions of a standard DS3218 servo. Practical Uses It is intended for use as a steering component in applications requiring compatibility with the DS3218 servo. Included Parts - Tarmo5 Mod Steering Bar.stl Printing Guidance The author instructs to print this model with supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Servo horn, control surface - glue in place

Servo horn, control surface - glue in place

Servo horn, control surface - glue in place Purpose This model is a servo horn designed to be glued directly to a control surface on an RC plane or boat. Practical Uses It serves as a mechanical link for remote-controlled vehicles. The author advises users to check the dimensions and adjust the scale to ensure compatibility with their specific application. Included Parts - servo-horn.stl - servo-horn_0.2mm_PLA_MINI_28m.gcode Printing and Assembly Guidance For printing, the author recommends using PETG or PLA. The optimal orientation for printing is on the side.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Servo cover mold

Servo cover mold

This model is a mold designed for creating a servo cover using fiberglass or carbon fiber. Practical uses include manufacturing lightweight covers for RC planes or gliders. The author reports using PLA for the mold and suggests a layup consisting of 3 layers of 25g/m2 fiberglass and 2 layers of 80g/m2 fiberglass at a thickness of 0.3mm. Included files: mold.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar