MESHOPIAScale modelling & RC17 tagged models · Page 1 of 1
Purpose: This model is designed for mounting MEUS Racing RC LED Lights onto a Traxxas UDR. Practical uses: It serves as a light bracket for RC vehicle lighting setups. Included parts: - UDR Baja Designs Light Mount.stl Printing/assembly guidance: The author suggests printing in PETG for durability and heat resistance. It is recommended to use 100% infill to ensure durability.
This model is a mount designed for the Traxxas Slash 4x4. It is intended to fit the HCG chassis and the Copperhead ESC. Practical uses include mounting a Copperhead ESC within an HCG chassis on a Traxxas Slash 4x4 platform. Included files: traxasslashhcgcopperheadescmount.stl
Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.
HSW RC Car Wall Mount Purpose This model is a specialized mount designed for the Traxxas Rustler. It serves as a remix of the JR_Craftworks Mount, specifically modified to be compatible with the Honeycomb Storage Wall (HSW) system. Practical Uses This mount allows users to organize and display their Traxxas Rustler RC car by attaching it directly to a Honeycomb Storage Wall setup. Included Parts - RC Car HSW Mount (.3mf file) Printing and Assembly Guidance Users should note that this model is a remix of the JR_Craftworks Mount designed for HSW compatibility. Please refer to the provided .3mf file for specific printing configurations.
This model is a 17mm hex nut remover specifically designed for Traxxas RC cars. Its primary purpose is to assist in the removal of wheel nuts during maintenance or repairs on compatible vehicles. Practical uses include simplifying the process of loosening stuck or tight 17mm hex nuts on RC wheels, providing a specialized tool for Traxxas enthusiasts. Included parts: - 17mm hex nut remover (provided in .3mf format) Printing and assembly guidance: No specific printing or assembly instructions are provided in the source text.
Spur Gear Holder for RC cars Purpose This model is designed to serve as a dedicated holder for carrying extra spur gears for RC cars. Practical Uses It is intended for use in RC hobbyist applications, specifically for those needing to transport spare spur gears. The tags indicate compatibility or relevance to Traxxas and Traxxas Maxx models. Included Parts The provided file includes spurholder.3mf. Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source text.
Adapter for Traxxas Big Bore shocks to Desert Lizard springs.
Traxxas receiver box seal TRA3629 Purpose This model is a replacement seal designed for Traxxas receiver boxes. It serves as a gasket to help maintain the integrity of the receiver compartment. Practical Uses It is compatible with several Traxxas models, including the Slash 4x4, Stampede 4x4, Bandit, Rustler, Stampede, and Spartan. It is intended for use in applications requiring a waterproof seal for the receiver box. Included Parts - 1 x Traxxas receiver box seal (traxxas rustler receiver box seal-Body.stl) Printing/Assembly Guidance According to the source, this part is intended to be printed in TPU.
Traxxas Stampede GoolRC 60A ESC Holder Purpose This model is a replacement ESC holder designed specifically for the Traxxas Stampede equipped with a Titan 12T brushed motor. It serves as a mounting solution for the electronic speed controller. Practical Uses It allows for the direct mounting of the ESC to the original Traxxas ESC mount on the Stampede chassis, facilitating repairs or component upgrades. Included Parts - GoolRC 60A ESC Holder Traxxas Stampede (.obj) - GoolRC 60A ESC Holder Traxxas Stampede (.stl)
TRX4 inner fender mount for those using aluminium front shock towers
TRX4 custom ESC mount Purpose This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias. Practical Uses It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance. Included Parts - 1x ESC mount (ESC_mount.stl) Assembly Guidance To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.
Purpose This part serves as an adjustable front chassis-to-body component for the Traxxas E-Revo. Practical Uses It is designed to function as a spare carrier for the E-Revo chassis. The author notes that compatibility with other Traxxas models is unconfirmed. Included Parts - spare_carrier.stl Printing/Assembly Guidance The author reports measurement and modeling inaccuracies, noting that filing may be required for a proper fit. The buckle hole in this specific version may be too small. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.
Purpose: This part acts as a rollbar to protect the mechanism located between the servo and the turning under the servo. Practical Uses: It is intended as a quick part replacement rather than a long-term solution. The author notes it is not as aesthetically pleasing as the original Traxxas part. Included Parts: - mechanism_cover.stl
Steering Spacer for TRX4M Purpose This model is a steering spacer designed for use when installing a Reefs Micro 99 Servo paired with a Reefs Micro short horn on a TRX4M. Practical Uses It is intended to provide fitment between the steering horn and the steering link. The author specifically designed this to work with a TRX4M setup that utilizes a metal steering link, the Reefs Micro 99 servo, and the Reefs Micro horn. Included Parts - TRX4M Steering Space.stl Printing and Assembly Guidance The author reported successful use of PLA for this part, noting that it is holding well. However, the author suggests that stronger materials may provide better durability for this application.
Traxxas Slash 2WD Motor Holder Purpose This model is designed to hold a Titan 550 12T RC motor securely during maintenance or initial use. It provides a stable base for the motor while it is being cleaned or during the break-in process. Practical Uses It serves as a dedicated stand for hobbyists working on Traxxas Slash 2WD setups, ensuring the motor remains upright and stationary during cleaning tasks or while running through its break-in period. Included Parts - single vent motor stnad.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.
Traxxas 2wd Wheelie Bar Purpose This is a fully printable wheelie bar designed for Traxxas 1/10 scale 2wd cars and trucks. It is intended to provide a 35-45 degree angle depending on the specific vehicle, while remaining tucked closer to the body. Practical Uses This model is compatible with RPM and Stock bumper mounts for vehicles including the Traxxas Bandit, Rustler, Stampede, and Slash. It is designed to be a replaceable part that can be reprinted if worn down or broken during use. Included Parts - wheelie center bar.stl - Side Bracket.obj - Wheelie Bar.3mf - Wheel.stl Printing and Assembly Guidance For printing, the creator used PETG with a layer height of 0.15mm to 0.20mm, 6 sides, 70% infill, and supports generated from the print bed only. Assembly requires six 3mm screws. It is recommended to use screws between 15mm and 20mm long, though 10mm screws can be used if necessary.
Purpose: These are simple, separated jack stands designed to be easily placed under different locations of an RC vehicle. The author designed them specifically for use with a TRX4. 1/10th Scale Jack Stands Practical Uses: They are intended for supporting RC vehicles, such as the Traxxas TRX4, during maintenance or storage. Included Parts: trx4 axle stand rev2.stl Printing/Assembly Guidance: The author reports printing these in PLA with 50% infill, though they note that the required infill may depend on the weight and modifications of the vehicle.