2 tagged models · Page 1 of 1

#plate

Discover 3D models tagged plate and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Placa de batería de fondo plano para Tamiya Monster Beetle 2015

RC & MecánicaFree

Flat-bottom battery plate for Tamiya Monster Beetle 2015

Side closure plate for the Tamiya Monster Beetle battery housing, 2015 re-edition. The author replaced the ribbed inner face with a flat surface to accommodate their battery, which was about 4 mm longer than the space available with the original plates. This measurement describes their specific case and does not guarantee an identical expansion in other units. Preparation, compatibility, and printing The source suggests PETG or PLA and considers increasing the infill to 100% around the holes. Check the length and width of your battery before printing and ensure that the plate or screws do not press against the casing. Check the closure and cable routing with the equipment turned off; do not force a battery that is still too large.

Technology: Sin probar
material: PETG, PLA
Difficulty: Sin especificar

HerramientasFree

CR-10 V2 Metal Dual Gear Extruder Runout Sensor Adaptor

CR-10 V2 Metal Dual Gear Extruder Runout Sensor Adaptor Purpose This adapter plate is designed to align the CR-10 V2 runout sensor with a metal frame dual gear extruder. It addresses the issue where common metal frame dual gear extruders (such as the Redrex brand) have a filament input hole that is positioned higher and slightly off-center compared to a standard Creality extruder. Practical Uses This model is used to reposition the runout sensor so that it correctly aligns with the filament path of specific aftermarket metal frame dual gear extruders on a CR-10 V2 printer. Included Parts The model is provided in two distinct versions to accommodate different hardware preferences: - One version features countersunk holes, designed to mount to the CR-10 using four M3x12 flat head screws. - The second version features counterbore holes, designed to mount using four M3x8 button head or cap screws. Assembly Guidance The runout sensor mounts directly to the plate using the stock screws, which thread into the plate itself.

Technology: Sin probar
material: —
Difficulty: Sin especificar