Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

20 tagged models · Page 1 of 1

#holder

Discover 3D models tagged holder and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Placa de batería de fondo plano para Tamiya Monster Beetle 2015

Flat-bottom battery plate for Tamiya Monster Beetle 2015

Side closure plate for the Tamiya Monster Beetle battery housing, 2015 re-edition. The author replaced the ribbed inner face with a flat surface to accommodate their battery, which was about 4 mm longer than the space available with the original plates. This measurement describes their specific case and does not guarantee an identical expansion in other units. Preparation, compatibility, and printing The source suggests PETG or PLA and considers increasing the infill to 100% around the holes. Check the length and width of your battery before printing and ensure that the plate or screws do not press against the casing. Check the closure and cable routing with the equipment turned off; do not force a battery that is still too large.

Technology
Sin probar
material
PETG, PLA
Difficulty
Sin especificar
Vista de Remote control holder

Remote control holder

Remote Control Holder Purpose This model is a wall-mounted holder specifically designed to store and organize a remote control. Practical Uses It serves as a dedicated mounting solution to keep a TV or device remote easily accessible while reducing clutter on surfaces. Included Parts - porta telecomando.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Plane Clothes Hanger

RC Plane Clothes Hanger

RC Plane Clothes Hanger Purpose This model is a specialized holder designed to hang RC planes by the elevator. Practical Uses It serves as a storage solution for RC aircraft, utilizing a hanging rod to suspend the planes. Included Parts - SimplePlaneHolder.stl Technical Specifications - Distance from the holder to the hanging rod: 150 mm - Spacing between the holding arms: 100 mm

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Remote control LINDBY holder
OtrosFree

Remote control LINDBY holder

Remote control LINDBY holder Purpose This model is a holder specifically designed to hold a Lindby remote control. Practical Uses It serves as a wall-mounted storage solution for the Lindby remote control. Included Parts - Lindby Holder.3mf Printing and Assembly Guidance The author suggests printing the model using PLA filament. Recommended print settings include using 3 walls and 15% infill with a basic setup. The model is designed to be printed without the need for supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC305 5.8 RX belt holder

RC305 5.8 RX belt holder

RC305 5.8 RX belt holder Purpose This model is designed to fix an RC305 video receiver onto goggles belts. Practical Uses It serves as a mounting solution for securing the RC305 receiver to FPV goggles via a belt system. Included Parts - RC305 holder.stl - belt mount.stl Printing and Assembly Guidance The author suggests using 0.2/0.4 PETG for printing. No supports are required for this model. For assembly, the author recommends gluing the belt clip using CA glue.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de X-Sense RC01 Pro remote holder
HogarFree

X-Sense RC01 Pro remote holder

Purpose This model is designed to hold an X-Sense RC01 remote in an accessible location. It features a shallow indentation on the back intended to accommodate double-sided tape for mounting. Practical Uses The holder can be attached to smooth surfaces using double-sided tape. The design allows for easy removal of the remote to prevent difficulty during emergencies. Included Parts - xsense-remote-holder.3mf - xsense-remote-holder.stl - xsense-remote-holder.stp Printing/Assembly Guidance The designer printed the holder upright on a Bambu Lab P1S using a 0.16mm profile and FormFutura rPLA White filament without needing supports. Users may scale down the depth axis if a more snug fit is desired. Note that the circular cutouts at the top may not align with the remote button due to measurement discrepancies in the provided files.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Pouzdro na kosticky 1/8 RC Buggy XB8 25

Pouzdro na kosticky 1/8 RC Buggy XB8 25

Pouzdro na kosticky 1/8 RC Buggy XB8 25 Purpose This model is a battery holder/container designed specifically for use with a 1/8 scale Xray XB8 25 RC Buggy. Its primary function is to provide a dedicated storage space for batteries within the vehicle. Practical Uses It serves as a battery reservoir (zasobnik) or housing (pouzdro) to secure batteries during operation in an RC Buggy application. Included Parts - Pouzdro na kosticky.stl (Note: This version is described as being without supports/Bez podper). Printing and Assembly Guidance No specific printing parameters or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Remote Midea AC Multiboard Multiconnect Holder
OtrosFree

Remote Midea AC Multiboard Multiconnect Holder

This model is a dedicated holder designed to keep a Midea AC remote organized on a Multiboard wall. The author has modified the design to include a Multiconnect feature, specifically allowing for integration and use on a Multiboard system. Additionally, the model has been shortened by the author to reduce filament consumption during printing. Practical uses for this model include mounting a Midea air conditioning remote directly to a Multiboard wall setup to ensure it remains accessible and organized. Included parts: - remote_Midea AC Multiboard multiconnect.3mf

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Plane Holder

RC Plane Holder

RC Plane Holder Purpose This model is a wall-mounted bracket designed to hold a Sky Surfer RC plane. It serves as a storage solution to keep the aircraft secure while displayed on a wall. Practical Uses It is intended for hobbyists looking for a dedicated wall mount to organize and display their Sky Surfer model planes. Included Parts - holder for sky-surfer.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Vertical DC motor holder

Vertical DC motor holder

Vertical dc motor holder Purpose This is a compact and practical mount designed specifically for small DC motors with an approximate 30 mm diameter. This updated, stronger version is intended for vertical setups where the motor must stand in an upright position. Practical Uses This holder is ideal for various applications, including DIY tools, custom machines, or experimental builds requiring a stable vertical motor orientation. Included Parts - dc motor holder vertical.stl - dc_motor_holder_stronger_version_3mf.3mf

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Q903 /Q905 18650 Battery Mod

Q903 /Q905 18650 Battery Mod

Q903 / Q905 18650 Battery Mod Purpose This modification is designed for the Hosim Q903 and Q905 RC cars. It allows users to upgrade from stock batteries to 2s (7.4V) 18650 Li-ion battery packs, providing increased capacity and greater flexibility. Practical Uses This mod is ideal for users seeking longer run times and easier battery swaps. The holder is designed to securely hold standard 18650 cells and fits the vehicle chassis with minimal changes required. Included Parts - Q905Battery_Holder.stl - Base.stl Printing and Assembly Guidance To assemble, use a couple of small self-tapping screws to secure the base to the holder. The hold downs for the elastic require a quick cut with a hobby knife during installation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DC Brushed Motor 555 sized holder

DC Brushed Motor 555 sized holder

DC Brushed Motor 555 sized holder Purpose This 3D model is a custom holder designed to accommodate a DC Brushed Motor 555. It is intended for use in LEGO Technic-based projects. Practical Uses As specified by the author, this component is used in the project '35 KPH FAST Lego RC CAR - Lego RC Car Part 2' featured on the TinkerTown YouTube channel. It provides a mounting solution for the motor within a LEGO Technic car build. Included Parts The model is provided in a .3mf file format (555_cover_v3_8mm.3mf) and features an 8mm hole designed to fit a custom axle. Attribution: TinkerTown

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de FRSKY Archer SR 8 PRO Receiver holder

FRSKY Archer SR 8 PRO Receiver holder

FRSKY Archer SR 8 PRO Receiver holder Purpose This model is designed as a simple holder specifically for the FRSKY Archer SR8 PRO receiver. Practical Uses It serves as a mounting solution for the FRSKY Archer SR8 PRO receiver in RC applications. Included Parts - Držák SR 8 PRO var.1 v3.stl Assembly Guidance The author instructs to use a rubber band to secure the receiver within the holder.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Creality CR-10 SE Cam Holder

Creality CR-10 SE Cam Holder

Creality CR-10 SE Cam Holder Purpose This model is designed to serve as a cam holder specifically for the Creality CR-10 SE printer. Practical Uses It is used to hold a camera component in place on the printer hardware. The author notes that the fit is intentionally very tight, requiring a bit of force to push the holder into position. Included Parts - CR-10 SE CamHolder.stl Printing and Assembly Guidance When assembling, be prepared to apply force to push the holder in, as the fit is designed to be very tight.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Body Clip Retainers

RC Car Body Clip Retainers

RC Car Body Clip Retainers Purpose These retainers are designed to hold body clips for RC cars, intended to provide better handling during use. Practical Uses They are used as holders for body clips on RC vehicles, specifically tagged for compatibility with models such as Traxxas and TRX4. Included Parts - Držák spony.stl Printing and Assembly Guidance The author recommends using 100% infill and a 0.2 mm layer height for printing this model.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Flysky FS-ST8 Wall Holder

Flysky FS-ST8 Wall Holder

Flysky FS-ST8 Wall Holder Purpose This model is designed as a wall holder specifically for the Flysky FS-ST8 radio. Its primary function is to provide a dedicated storage space to keep the radio safe. Practical Uses It can be used as an organizational tool to store RC equipment on a wall, preventing the radio from being left on surfaces where it might be damaged. Included Parts - Flysky FS-ST8 Wall Holder.stl Printing Guidance The author reports a print time of approximately 1 hour.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Lipo Volt Check Holder

Lipo Volt Check Holder

Purpose This model is a small holder designed to secure a battery voltage checker in place to prevent it from moving while using an RC. Practical Uses The holder can be glued to various surfaces for mounting. It can be used without screws, though screws can be used if desired. The author notes that the fit is easy if the part is not painted, but becomes a hard fit if paint is applied. Included Parts - volt check holder.stl Printing/Assembly Guidance The part measures 30x16x17mm. It is designed to be glued anywhere.

Technology
Sin probar
material
—
Difficulty
Sin especificar