6 tagged models · Page 1 of 1

#camera

Discover 3D models tagged camera and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Carcasa Flywoo O4 adaptada para cámara CO3

RC & MecánicaFree

Flywoo O4 housing adapted for CO3 camera

Housing modified from the Flywoo O4 design to house a CO3 camera. The source indicates a 25.4 × 25.4 mm mounting pattern and mentions M2 screws and threaded inserts. The modification adds material around the camera; the author's claims regarding impacts or vibrations do not equate to protection tested by Meshopia. Preparation, compatibility, and printing The author recommends TPU with supports. Check the removal of those supports and the lens clearance before slicing. Verify the exact camera, the connectors, and the clamp closure without tightening the equipment housing. The length of all screws and a confirmed final weight are not provided; measure the assembly before installing it.

Technology: Sin probar
material: TPU
Difficulty: Sin especificar

RC & MecánicaFree

Adjustable case for Eachine TX02 / FPV camera

Adjustable case for Eachine TX02 / FPV camera Purpose This model is an adjustable case designed to protect the Eachine TX02 camera, including its circuit board and antenna. It is specifically intended for mounting on an RC car. Practical Uses To secure the camera's orientation within the housing, an M4 screw and nut are used. The entire assembly is attached to the RC car using double-sided tape. The case is secured at the front and rear sections using two cable ties. An additional cable tie can be applied around the base of the housing's antenna area for extra stability. Included Parts - Front.stl - Rear.stl - Base plate.stl - Caméra_Eachine_TX02.step

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Lego 42099 Raspberry Pi and Camera mounts

Purpose: These brackets are designed to hold a Raspberry Pi and a Raspberry Pi camera on the Lego 42099 (4X4 X-treme Off-Roader). The setup is intended for remote control driving, allowing for WiFi control and a remote video feed to address the limited range of Bluetooth control via the official Lego app. 1 Practical Uses: The author suggests mounting the Raspberry Pi camera on the roof for better visibility and placing the Raspberry Pi inside the cabin. The design is compatible with Raspberry Pi model 3B+ and Raspberry Pi camera rev1.4. Included Parts: - CameraBracket.stl - PiHolder A.stl - PiHolder B.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)

This camera mount is designed for the GEPRC Cinebot 30. It is intended to replace the original part on the drone. Practical uses include mounting a GoPro (8, 9, 10, 11, 12) or a DJI Action 2 to the Cinebot 30. Included files: - Cinebot30 Camplate Gopro.stl - Cinebot30 Camplate Gopro.step Printing and assembly guidance: The author suggests printing the part in PETG or PC. The reported weight when printed in PC is 5.3g. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount

This model is a remixed camera mount designed for the GEPRC Cinebot 30. It features an integrated mount for the TBS M8.2 GPS module. Practical uses include mounting a GoPro (versions 8, 9, 10, 11, or 12) or a DJI Action 2 to the drone, alongside a GPS module. Included files: - Cinebot30 Camplate Gopro GPS.STL - Cinebot30 Camplate Gopro GPS_0.15mm_PETG_MK3S_1h35m.gcode Printing guidance: The source suggests printing with PETG at a 0.15mm layer height and 100% infill using supports.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

FPV Mount

FPV Mount Purpose This model is an FPV mount designed for mounting cameras. According to the author, it is intended for use on the tails of RC planes, though it is also noted for various other applications. Practical Uses Based on the provided tags, this mount can be used for FPV (First Person View) video setups in RC planes and RC cars. It serves as a holder for cameras to facilitate video recording or live streaming in these hobbyist contexts. Included Parts - Part Studio 1 - Part 1 (1).stl Printing and Assembly Guidance No specific printing parameters, material requirements, or assembly instructions are provided in the source text.

Technology: Sin probar
material: —
Difficulty: Sin especificar