MESHOPIAScale modelling & RC8 tagged models · Page 1 of 1
This 1/30 scale air compressor model is designed for model pick up. Practical uses include scale modeling applications. Included files: - compressor_half_a.stl - compressor_half_b.stl Printing guidance: Print at 0.8mm layer height with a Skirt to avoid seam lines.
Fusion Switch Battery Cover Purpose This model is designed to serve as a battery cover for a Hobbywing Fusion, specifically intended to hide the switch from view to enhance scale realism. Practical Uses It is used in RC scale modeling, such as a Toyota Pickup build, to conceal electronic components. A mirrored version is included to allow for mounting the battery on the driver side. Included Parts - Batt_Boden.stl - Batt_Deckel.stl - Batt_Deckel_Mirrored.stl Printing and Assembly Guidance To assemble, print the "Boden" part and select the appropriate "Deckel" version. The components are held together using two clips. For increased scale detail, the author suggests placing small wires into the small holes located on the battery poles.
1/10 Scale Trailer Hitch for 5.5mm Ball / Height adjuster
This scale compressor is a simple accessory designed specifically for the SCX24. It serves as a scale detail part to enhance the realism of the RC vehicle. Practical uses for this model include adding scale realism to an SCX24 build, representing onboard air compression equipment. Included parts: - compressor - body - compressor - handle Printing and assembly guidance: The files are provided in .3mf and .stl formats for the body and handle components.
This model is a scale car battery designed for use with RC crawlers. The author notes that the model can be scaled to any desired size to fit specific crawler builds or scale requirements. 120-300 words when facts suffice, otherwise be concise.
Anchor Purpose This model is a small 1/10 scale anchor designed for use with scale vehicles and crawlers. It serves as a functional accessory when there is no available attachment point for a winch. Practical Uses It is intended for RC scale enthusiasts and crawler drivers who need an alternative method to utilize their winch in environments where traditional anchoring points are unavailable. Included Parts The model consists of two separate parts provided in the file '19_acc_ancre.stl'. Printing and Assembly Guidance The author instructs the user to print the two parts and then attach them together.
SCX6 1/6 Scale RC Hood Louvers Purpose These components are designed as scale accessories for the Axial SCX6, providing 1/6 scale hood louvers to enhance the appearance of the RC vehicle. Practical Uses They serve as aesthetic scale upgrades for Axial SCX6 crawlers. The set includes a stencil to assist in cutting out the necessary material from the vehicle's hood. Included Parts - Louver Left.stl - Louver Right.stl - hood louvers.3mf - Louver Stencil.stl Printing Guidance According to the author, the parts shown in the reference images were printed using PETG filament with a .25mm nozzle size.
Purpose: This model is a logo designed for a 1/10 scale Fahr tractor model from the 1953-1959 era. Practical uses: The logo is intended to fit the hood of a D180H model. Included parts: - 45a_Fahr_logo.stl Printing/assembly guidance: The author recommends printing with a 0.12 layer height.