12 tagged models · Page 1 of 1

#wheels

Discover 3D models tagged wheels and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Ruedas grandes para crawler Hornet CyberBrick

RC & MecánicaFree

Large wheels for Hornet CyberBrick crawler

Alternative wheels for the CyberBrick-based Hornet crawler, proposed by its author to use different tires. The source does not specify inner diameters, widths, or tire references. The title "large wheels" is descriptive and does not replace a measurement comparison. Preparation, compatibility, and printing Measure the tire seat, the axle, and the clearance from the suspension and bodywork. A larger wheel modifies the available space and may require other parts of the assembly. Maintain the original scale during checking and do not scale to adjust only one diameter without checking the rest. No material or print profile is documented.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Separadores de llanta para DKS Pro de DukeDoks

Juguetes y juegosFree

Wheel spacers for DukeDoks DKS Pro

Purpose: These wheel spacers are designed for the DKS PRO by Dukedoks to allow for the use of different tire dimensions. They prevent suspension arms from hitting the wheel during rotation. Practical Uses: Use these spacers when installing larger or commercial tires that cause interference with the vehicle's suspension arms. Included Parts: - SEPARADOR 1mm.stl - SEPARADOR 2mm.stl - SEPARADOR 3mm.stl - SEPARADOR 4mm.stl - SEPARADOR 5,5mm.stl Printing/Assembly Guidance: The author printed these using PLA with 100% perimeters. When assembling, the screw length must be adjusted to reach the nut inside the hub based on the spacer thickness: - 1mm: M3x16mm - 2mm: M3x18mm - 3mm: M3x18mm - 4mm: M3x20mm - 5.5mm: M3x25mm

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

17 mm Socket Handle for RC Car Wheels

17 mm Impact Socket Handle for RC Car Wheels Purpose This model is designed to serve as a handle for a 17 mm impact socket, specifically intended for tightening 1:8 scale RC car wheels. The design aims to provide a rigid, weighted feel for improved handling during use. Practical Uses It is used as a custom tool to facilitate the tightening of RC car wheels using a standard impact socket. The handle is designed to be robust and includes a cover to improve tactile feel and provide protection if dropped. Included Parts - body.stl - cover.stl - cover_0.2mm_FLEX_MK3_48m.gcode - body_0.2mm_PLA_MK3_1h32m.gcode Printing and Assembly Guidance The body is intended to be printed in PLA with 4 wall lines for robustness. The cover can be printed in TPU for a better touch and impact protection, though PLA or ABS may also be used if TPU is unavailable. Assembly requires the following hardware: - M5 x 50mm Bolt - M5 Nut - 17mm Impact Socket (the designer used a "Geodore" brand socket) - Threadlock (optional) Attribution: Based on source description provided.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Juguetes y juegosFree

RC Paddle Wheels

Purpose These paddle wheels are designed for use in sand or snow environments. Practical Uses They are suitable for 1:10 scale monster trucks and feature a 12mm hex. Included Parts - Paddle tire - Right.stl - Paddle tire - Left.stl Dimensions 120mm x 70mm

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Nissan Skyline R34 — Brian-Styled Body and Wheel Meshes

This Nissan Skyline R34-styled model contains two original STL assets: a detailed sports-car body and a separate wheel set. The body includes a deep front bumper, sculpted bonnet, side skirts, mirror shapes, window outlines and a prominent rear wing. The source identification links the styling to Brian's car in 2 Fast 2 Furious. This is a miniature modeling asset; functional RC running gear is not supplied or verified. FILES AND TRACEABILITY The ZIP retains all original STL geometry bytes under English filenames, with an English file guide identifying each source component. Original documentation, where supplied, is preserved under English filenames. The individual STL files are also available for browser inspection. The public gallery uses our own rendering rather than the source photographs. PREPARATION AND USE Suitable for miniature painting, scale-model detailing, display projects and further mesh preparation. Printing and physical assembly have not been tested. Inspect units, dimensions, wall thickness, topology, supports, component alignment and fit before fabrication. No exact physical scale, printer settings, mounting pattern or chassis compatibility has been verified. ORIGINAL MESHOPIA COVER Our Blender-rendered image shows the source model with a new emerald finish on a painting stand in a wooden hobby workshop. Paint, stand, lighting and tools illustrate a possible finishing workflow; scene props are not included. Wheel components were resized and positioned in the private cover scene to illustrate a possible assembly; this placement is not a verified physical fit and does not alter the downloadable source geometry. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Volkswagen Beetle — Body, Interior and Wheel Variants

This Volkswagen Beetle body is identified in the source collection as a 1956 Fusca. The three original STL assets provide the rounded body shell, a separate interior and a steering-wheel component. Visible features include the curved roof, window openings, fenders, rear engine-cover contours and source bumper geometry. The original three-file set contains the body, interior and steering wheel. Additional body and wheel variants are listed below; a working chassis or drivetrain is not included. FILES AND TRACEABILITY The ZIP retains all original STL geometry bytes under English filenames, with an English file guide identifying each source component. Original documentation, where supplied, is preserved under English filenames. The individual STL files are also available for browser inspection. The public gallery uses our own rendering rather than the source photographs. PREPARATION AND USE Suitable for miniature painting, scale-model detailing, display projects and further mesh preparation. Printing and physical assembly have not been tested. Inspect units, dimensions, wall thickness, topology, supports, component alignment and fit before fabrication. No exact physical scale, printer settings, mounting pattern or chassis compatibility has been verified. ORIGINAL MESHOPIA COVER Our Blender-rendered image shows the source model with a new emerald finish on a painting stand in a wooden hobby workshop. Paint, stand, lighting and tools illustrate a possible finishing workflow; scene props are not included. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. ADDITIONAL BODY AND WHEEL VARIANTS Ten additional source STL files are supplied in a second English-named ZIP: six wheel, rim and tyre components from the first source layout, plus a second body shell, interior, wheel layout and steering wheel. All ten additions have separate selectable lightweight 3D previews. Together with the three original STL views, thirteen geometries are available for on-demand inspection. The original source body is identified as 1956; no verified year is assigned to the additional body variant. Source folders carry 1:18 and 1:24 labels, but actual fabrication scale, fit and cross-variant compatibility are untested. The two complete ZIP packages retain original native bytes and file guides. Display previews are normalized and approximately simplified; they do not establish physical units. Keep the variants separate when checking assembly. The existing own MESHOPIA cover is retained and does not illustrate every alternative.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Car Tuning Components — Vehicle Kitbash Set

A car-tuning kitbash component collection whose BLEND scene contains 86 named mesh objects. It includes wheels and rims, tyres, turbocharger and fan forms, steering wheels, sport seats, spoilers and wings, bumper and fascia components, side body pieces and structural/frame parts. The set supplies parts for further modelling rather than a complete working vehicle. The own use image shows five representative source objects: three rim designs, one sport seat and one turbocharger; it does not show the entire inventory. Seven native geometry formats are preserved. The 3DS file did not yield any usable mesh faces during conversion; it is retained as supplied, with no successful 3DS browser preview claimed. Six other source files have separate converted previews. COMPLETE SOURCE PACKAGE Geometry inventory: 1 3DS, 1 BLEND, 1 DAE, 1 FBX, 1 MAX, 1 OBJ, 1 STL. The ZIP preserves original native geometry bytes under English filenames. An included English file guide maps the files to their source part labels and documents duplicate aliases. Technical textures and documents are included where supplied. Internal native texture paths may require manual relinking. ON-DEMAND 3D INSPECTION 6 separate lightweight STL previews can be selected individually in the 3D viewer. Each is a normalized, approximate display conversion of its corresponding source, not a replacement for the full original. File identifier/source format mapping: 002: BLEND; 003: DAE; 004: FBX; 005: MAX; 006: OBJ; 007: STL. Native sources without a complete verified display: car-tuning-components-kitbash-geometry-001.3ds. PREPARATION AND USE Check original units, scale, assembly alignment, clearances, wall thickness, manifoldness, fabrication supports and component compatibility before use. Printing, mechanical function and assembly fit are untested. No included working RC electronics or verified printer profile is claimed. OWN MESHOPIA USE IMAGE An original locally generated AI-assisted photorealistic presentation is guided by inspected source geometry or supplied private assembly references, with a new finish, camera and usage setting. It illustrates the model or tools in use; it is not evidence of a manufactured object or a physical print. Additional scenery, tools, workshop equipment and installation hardware shown for context are not supplied. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Bianco — Body and Wheel Model Kit

A source-identified Bianco sports-coupe model set supplied as two STL files: the low curved coupe body and a four-wheel component layout. The body includes its curved cabin and windows, sculpted wheel arches and vent relief. No exact year or engine specification is verified. PACKAGE AND FILE NAMES The ZIP contains 2 distinct original STL geometry files under English filenames, preserving their native bytes. An English file guide maps each file to its original source part/variant label and identifies identical duplicate copies as aliases. Required repeat copies or alternative parts must be chosen deliberately before assembly. SELECTABLE ON-DEMAND 3D PREVIEWS Every distinct source STL has its own separately selectable lightweight STL display mesh. Choose each geometry identifier in the viewer to inspect that component. Display conversions are normalized and approximately simplified for browser use; the shown file-unit dimensions do not establish real fabrication units. The complete source ZIP retains the full original geometry. PREPARATION AND USE Check original units, scale, orientation, clearances, wall thickness, manifoldness, part alignment, support requirements and compatibility before fabrication. No MESHOPIA physical print, working drivetrain, tested printer profile or slot/RC compatibility test is claimed. Any additional rolling chassis, glazing materials, powered components or scenery shown for context are not included unless explicitly listed above. OWN MESHOPIA PRESENTATION An original locally generated AI-assisted photorealistic image uses our inspected source-geometry reference, with new finishes, camera, lighting and a hobby vehicle-use setting. It illustrates the source components assembled or installed; it is not a verified assembly simulation or evidence of a manufactured object. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Cobra Sports Coupe — Body and Interior Model Kit

A Cobra-labelled sports-coupe body/interior kit with six STL files. The inspected body has a low wide nose, recessed front lamp forms, a prominent angular bonnet opening, a raised cabin roof with window openings and an integrated rear wing. It includes the body, an interior/wheel layout, separate front and rear wheel forms, a steering wheel and an alternative interior. These overlapping component layouts are alternatives. The source label identifies Cobra; no verified AC/Shelby production trim, exact year or physical fabrication scale is claimed. PACKAGE AND FILE NAMES The ZIP contains 6 distinct original STL geometry files under English filenames, preserving their native bytes. An English file guide maps each file to its original source part/variant label and identifies identical duplicate copies as aliases. Required repeat copies or alternative parts must be chosen deliberately before assembly. SELECTABLE ON-DEMAND 3D PREVIEWS Every distinct source STL has its own separately selectable lightweight STL display mesh. Choose each geometry identifier in the viewer to inspect that component. Display conversions are normalized and approximately simplified for browser use; the shown file-unit dimensions do not establish real fabrication units. The complete source ZIP retains the full original geometry. PREPARATION AND USE Check original units, scale, orientation, clearances, wall thickness, manifoldness, part alignment, support requirements and compatibility before fabrication. No MESHOPIA physical print, working drivetrain, tested printer profile or slot/RC compatibility test is claimed. Any additional rolling chassis, glazing materials, powered components or scenery shown for context are not included unless explicitly listed above. OWN MESHOPIA PRESENTATION An original locally generated AI-assisted photorealistic image uses our inspected source-geometry reference, with new finishes, camera, lighting and a hobby vehicle-use setting. It illustrates the source components assembled or installed; it is not a verified assembly simulation or evidence of a manufactured object. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Volkswagen Gol GTI — Multipart Body and Accessory Kit

A Volkswagen Gol GTI multipart body/accessory kit with five STL files: the body, accessory layout, transparent-part forms, wheel layout and tyre layout. The body has a compact angular hatchback profile with bonnet, roof, window relief and wheel arches. This complete kit includes its matching wheel companion even though the standalone wheel set also exists in the catalog. Exact model year, body-to-chassis fit and physical scale are unverified. PACKAGE AND FILE NAMES The ZIP contains 5 distinct original STL geometry files under English filenames, preserving their native bytes. An English file guide maps each file to its original source part/variant label and identifies identical duplicate copies as aliases. Required repeat copies or alternative parts must be chosen deliberately before assembly. SELECTABLE ON-DEMAND 3D PREVIEWS Every distinct source STL has its own separately selectable lightweight STL display mesh. Choose each geometry identifier in the viewer to inspect that component. Display conversions are normalized and approximately simplified for browser use; the shown file-unit dimensions do not establish real fabrication units. The complete source ZIP retains the full original geometry. PREPARATION AND USE Check original units, scale, orientation, clearances, wall thickness, manifoldness, part alignment, support requirements and compatibility before fabrication. No MESHOPIA physical print, working drivetrain, tested printer profile or slot/RC compatibility test is claimed. Any additional rolling chassis, glazing materials, powered components or scenery shown for context are not included unless explicitly listed above. OWN MESHOPIA PRESENTATION An original locally generated AI-assisted photorealistic image uses our inspected source-geometry reference, with new finishes, camera, lighting and a hobby vehicle-use setting. It illustrates the source components assembled or installed; it is not a verified assembly simulation or evidence of a manufactured object. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

M113-Style Tracked APC — Multipart Vehicle Model Kit

A multipart tracked armored personnel carrier model with a box-shaped hull, sloped front, roof hatches, rear opening components, track and wheel parts, suspension-related pieces and decorative fittings. The collection archive is labeled M1113 PMV APC, while component names and the assembled reference indicate an M113-style carrier. An exact military subvariant is not independently established. The English-named package preserves 58 original STL geometry files, supplied documentation and a filename mapping guide. Each original STL is also separately selectable for on-demand 3D inspection, with unchanged geometry bytes. Consult the filename guide for repeated-part quantities. These are individual source parts and variants; automatic assembly is not supplied. Physical printing, mesh closure, fit, clearances, strength, moving parts and RC operation have not been tested. Inspect in a slicer and establish orientation and supports; additional adhesives, rods, pins, axles, bearings and electronics may be needed. Decorative fittings are miniature model geometry. No physical vehicle is included. NATIVE SOURCE CONTENTS English-named ZIP with supplied native geometry, technical material and texture companions, and an English filename mapping guide. Original geometry bytes are preserved. Native software and renderer compatibility are untested; texture paths may need relinking using the mapping. Technical textures are package assets, not public gallery photos. PREPARATION AND USE Digital model only. Physical scale, printability, wall thickness, watertightness, part separation, fit, strength and mechanical or RC operation have not been tested. Inspect the source in appropriate modelling or slicing software before fabrication. No verified printer profile or working drivetrain is claimed. ORIGINAL MESHOPIA PRESENTATION The cover is a new AI-assisted photorealistic illustration generated locally in ComfyUI using our inspected render of the supplied geometry. It shows a scale-model hobby finishing scene with a new finish, photographic lighting and environment. It does not document a manufactured or tested prototype. Hands, brushes, paint jars, bench and background props are illustrative and are not included. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Torino Nürburgring 1969 — 1:32 Coupe Model Kit

A Torino Nürburgring 1969 two-door coupe model kit supplied in a 1:32-labeled source collection. The 13 original STL files include body versions, 1969 and original-detail variants, headlight pieces, wheels, rims and tires. Inspect the English filename guide to select compatible variants. Every original STL is separately selectable for on-demand 3D inspection and is preserved with unchanged bytes in the complete source package. An additional illustrative assembled display combines the original body with four instances of a supplied wheel, positioned using the supplied wheel coordinates. It shows the intended coupe silhouette; it does not establish axle fit, running clearance, printable joints or functional wheel movement. The new photorealistic cover depicts a cream and navy hobby model during miniature finishing. Source scale is a collection label; actual printed dimensions, printing, wall thickness, supports and component fit remain untested. Digital files only; tools, paint and scenery in the image are not included. NATIVE SOURCE CONTENTS English-named ZIP with supplied native geometry, technical material and texture companions, and an English filename mapping guide. Original geometry bytes are preserved. Native software and renderer compatibility are untested; texture paths may need relinking using the mapping. Technical textures are package assets, not public gallery photos. PREPARATION AND USE Digital model only. Physical scale, printability, wall thickness, watertightness, part separation, fit, strength and mechanical or RC operation have not been tested. Inspect the source in appropriate modelling or slicing software before fabrication. No verified printer profile or working drivetrain is claimed. ORIGINAL MESHOPIA PRESENTATION The cover is a new AI-assisted photorealistic illustration generated locally in ComfyUI using our inspected render of the supplied geometry. It shows a scale-model hobby finishing scene with a new finish, photographic lighting and environment. It does not document a manufactured or tested prototype. Hands, brushes, paint jars, bench and background props are illustrative and are not included. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar