3 tagged models · Page 1 of 1

#cable

Discover 3D models tagged cable and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Motor cable protector for FPV drone

Part intended to cover the motor cables of an FPV drone along their path over the chassis arm. The source describes this function, but does not identify a compatible frame nor specify length, width, or fastening system. It is not presented as a universal protector nor as certified electrical insulation. Preparation, compatibility and printing Compare the part's channel with the cable bundle and the width of the arm. Check that the fastening does not compress conductors, rub against solder joints, or intrude into the path of the propellers. Prepare a fit test with the equipment turned off. No material or print profile is documented; flexibility and retention must be verified during actual assembly.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Soporte de servo con alojamiento para conector

RC & MecánicaFree

Servo bracket with connector housing

Mount for a servomotor that incorporates a zone intended for a female servo cable connector. The design aims to house the servo and organize the cable output. The source does not identify a specific servo model or its dimensions, so compatibility must be verified in the file and with the physical component. Preparation, compatibility, and printing The hardware is described as "832" and "832 × 1 3/4"; this notation needs confirmation before purchasing or forcing screws into the part. Compare the position of the lugs and the cable path, and ensure the connector remains accessible. No material or profile is documented. Perform a fit test without powering the servo and keep the arm's range of motion clear.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

XT60 to DC socket size: 5.5 x 2.1 mm

This model is designed to repurpose a 12V power supply by providing a way to connect it without cutting off the existing barrel connector. It serves as a modification of an existing XT60 enclosure project. Practical uses include converting a standard DC barrel jack power supply into a format compatible with XT60 connections. The design is specifically sized for a 5.5 x 2.1 mm DC socket. The provided files include: - dc_power_jack_3p5x1p35mm (bottom).3mf - dc_power_jack_3p5x1p35mm v1 (Top).3mf This project is a slight tweak to the XT60 enclosure found on MakerWorld (https://makerworld.com/en/models/757261-xt60-enclosure#profileId-691653).

Technology: Sin probar
material: —
Difficulty: Sin especificar