10 tagged models · Page 1 of 1

#case

Discover 3D models tagged case and check their print information, files and terms before downloading.Search this tag in the catalogue →

Vista de Insertos y tapa baja para estuche Whoopster de 65 mm

OrganizaciónFree

Inserts and low lid for 65 mm Whoopster case

Modification of the 65 mm Whoopster case with a lower lid to transport the equipment without the charger. The author includes removable compartments and handles to access the contents without tipping over the box. This is an adaptation of an existing case, not a confirmation that any 65 mm micro-drone will fit. Preparation, compatibility, and printing Check which elements the file contains and which case body you need to keep. Before printing the entire modification, check the clearance of the lid, drawers, and handles. The reduced lid foregoes the charger space according to the source. No printing parameters are documented; avoid trying to fix a stuck drawer by forcing its walls.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Cubierta frontal personalizable para emisora RC

RC & MecánicaFree

Customizable front cover for RC transmitter

Purpose This model serves as a front cover for DIY RC transmitter projects. It is intended as a starting point for hobbyists building custom radio controllers and can be modified to accommodate different electronics. Practical Uses The cover is designed for housing custom radio controllers that utilize dual joysticks, a display, an antenna, and various switches. It features dual joystick openings, a display cutout, an antenna mounting hole, and switch mounting positions. Included Parts - case 1 remote.stl - case 1 remote.step Printing and Assembly Guidance The author reports that the model is easy to print without the need for complex supports.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Estuche sencillo para Beacon y joysticks HOVERAir X1 Pro/ProMax

RC & MecánicaFree

Simple case for Beacon and joysticks for HOVERAir X1 Pro/ProMax

Identified carrying case or holder for the Beacon and the joysticks of the HOVERAir X1 Pro/ProMax. The source aims to keep these accessories together and facilitate their preparation. It does not document protection against impacts, water, or dust, nor does it claim to be suitable for transporting the complete drone. Preparation, compatibility, and printing Check which accessories fit into the housings and check their removal before printing. The fit must hold them without pressing buttons or connectors. No material, layer, or infill is documented. An initial test of the cavities will allow checking tolerances without assuming that all revisions of the accessories share the same dimensions.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HogarFree

Remote Control Case - Life Dream

This model is a replacement case designed for the Life Dream remote control, which features 2 channels/buttons. It was created as a solution for when the original housing breaks and a replacement part is unavailable. Practical uses include restoring the functionality and physical protection of a Life Dream remote control unit. Included parts: - Remote_control_button.stl - Remote_control_bottom.stl - Remote_control_top.stl Printing and assembly guidance: The author printed this model using PLA filament. While the case is designed to hold together on its own, the author suggests using adhesive if the case opens due to differences in printer tolerances.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

Generic DC Power Supply Wall Mount

Generic DC Power Supply Wall Mount Purpose This model is a case designed to enclose a generic 12V power supply unit (PSU) and mount it to a wall. It is intended to fit most standard standalone power supplies used in 3D printing, such as Mean Well models. The design features ventilation holes, though one side lacks holes to prevent dust collection inside the PSU. A specific hole is included to allow visibility of the status indicator light. Practical Uses This case is used for organizing and securing power supplies on a sturdy surface. It allows for easy access to connectors while keeping the unit enclosed. The design includes a cap to close off the open side of the case. Included Parts - Power Supply Mount - Case - Power Supply Mount - Cap Printing and Assembly Guidance For printing the case, use tree supports and an infill of ≥ 15% with ≥ 2 walls. When printing the cap, it is recommended to print at under 100% scale depending on your printer's accuracy and filament. Users should consider the thermal properties of their chosen filament against the heat generated by the PSU. To assemble, disconnect the power, install the case on a surface using screws (5mm diameter holes), and slide the PSU in so connectors are accessible and ventilation patterns match. If using the cap, snap it into place via friction fit. To remove the PSU, disconnect power and push the unit from the covered side; if the cap is installed, it should pop off with the force of the PSU.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

CASE ENCLOSURE for XY-7025 DC-DC step down changer converter with XT-60 connectors

This model is a case enclosure designed for the XY-7025 DC-DC step down changer converter, which features XT-60 connectors. Purpose and Practical Uses The enclosure serves to house the XY-7025 converter. It includes integrated legs intended to provide better ventilation for the device during operation. Included Parts The model files include the main case components, XT-60 holders, and legs. Specific files provided are: - XY7025-CASE.stl - XY7025-CASE-viko-1.stl - XT-60-DRZAK-LEP-NEW.stl - Nohy-spunty.stl - XT-60DRZAK-KABEL-NEW-FIN.3mf - XT-60DRZAK-KABEL-NEW-FIN.stl Printing and Assembly Guidance The author recommends using PCTG filament for printing. The case consists of four parts that must be assembled using acrylic super glue. Regarding the XT-60 holders, the author suggests sticking them in a position that you find most suitable for your specific needs.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

Case for 12V 0.8A DC PWM Speed Controller Module

Case for 12V 0.8A DC PWM Purpose This model is a protective chassis designed for a 12V 0.8A DC PWM single-wire fan temperature control speed controller. It is intended for use with computer noise reduction modules featuring an NTC B50K 3950 sensor. Practical Uses This case is used to house the speed controller module, providing a structured enclosure for electronic components used in fan temperature control and noise reduction applications. Included Parts The download includes four STL files, each featuring a different wall thickness to suit different printing preferences or structural requirements: - PWMv12_case_1.6mm.stl - PWMv12_case_1.4mm.stl - PWMv12_case_2mm.stl - PWMv12_case_1mm.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

Creality CR-10 All-In-One (AIO) Prusa Style Case System

Creality CR-10 All-In-One (AIO) Prusa Style Purpose This work-in-progress project is designed to reorganize a Creality CR-10 into a Prusa i3 style configuration. The objective is to mount the LCD at the front of the machine while housing the control board, MOSFET, fans, and power supply in the rear. The design utilizes magnets to allow for easy access to the panels. Practical Uses This model serves as a housing solution for users looking to consolidate electronics. It is intended for advanced users, as the author notes it is not for beginners. It requires significant custom work, including additional wiring, crimping, connectors, superglue, and fasteners. Included Parts The project includes 3MF files for the power supply case and lid, the control box case and lid, and the LCD case (front, back, and mount). STEP files are also provided for the LCD Mount, CR-10 Control Box, and CR-10 power supply to allow for manual alterations. Assembly Guidance Assembly requires magnets (to be glued to lids and cases), an LCD cable, heat-set inserts, and wire loom. The author notes that some heat-set inserts may be difficult to install. Additionally, the holes for the power plug and power switch in the power supply case may require manual enlargement by approximately 2mm to accommodate components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Jumper T20 transportation case

jumper t20 transportation case Purpose This model is designed to serve as a protective transportation case for the Jumper T20 transmitter (specifically the 2.4 ELRS version). The design aims to cover the stick and provide a way to attach a strap for easier carrying. Practical Uses It is intended for protecting the transmitter during transport. Note that the designer specifies this is intended for the 2.4 ELRS version and may not fit other variants of the device. Included Parts The model consists of two separate parts: - Main body (case) - Stick cap Printing and Assembly Guidance According to the source, the stick cap must be printed separately from the main body. The provided STEP files contain both components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

FrSky Taranis Q X7 Travel Case

FrSky Taranis Q X7 Travel Case Purpose This model is a travel case designed for the Taranis Q X7 radio, intended for transporting the device to flight locations and for home storage. Practical Uses The case features a locking tab at the bottom and a 25mm wide Velcro strap at the top to secure the lid. It includes loops designed to hold a carrying strap up to 25mm wide. The design provides internal wiggle room to accommodate user-added padding. A specific 'Storage version' is available, which includes a 25mm x ~200mm section intended for a neck strap and charging cable. Included Parts The model files include components for both the standard and storage versions: Top, Bottom, and 'Thingy' components. Printing and Assembly Guidance According to the author, printing the case took approximately 12 hours using 600g of PETG. Assembly requires two M5x15 bolts and the 'Thingy' component to secure the Velcro strap in place.

Technology: Sin probar
material: —
Difficulty: Sin especificar