Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

69 tagged models · Page 1 of 2

#rc car

Discover 3D models tagged rc car and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Extensor de postes de carrocería para Corally Syncro RC

Body post extender for Corally Syncro RC

Purpose: This model extends the body post of an RC car. It is intended to resolve issues where certain bodies no longer fit the chassis posts due to the increased space required by larger batteries or cables. Practical Uses: The author specifically designed this for the Corally Syncro 4 to accommodate 2x hard case LiPo batteries, though they note it may fit other RC cars as well. Included Parts: - Team Corally Syncro4 Body Post Raiser.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Separadores de llanta para DKS Pro de DukeDoks

Wheel spacers for DukeDoks DKS Pro

Purpose: These wheel spacers are designed for the DKS PRO by Dukedoks to allow for the use of different tire dimensions. They prevent suspension arms from hitting the wheel during rotation. Practical Uses: Use these spacers when installing larger or commercial tires that cause interference with the vehicle's suspension arms. Included Parts: - SEPARADOR 1mm.stl - SEPARADOR 2mm.stl - SEPARADOR 3mm.stl - SEPARADOR 4mm.stl - SEPARADOR 5,5mm.stl Printing/Assembly Guidance: The author printed these using PLA with 100% perimeters. When assembling, the screw length must be adjusted to reach the nut inside the hub based on the spacer thickness: - 1mm: M3x16mm - 2mm: M3x18mm - 3mm: M3x18mm - 4mm: M3x20mm - 5.5mm: M3x25mm

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Ramp

RC Car Ramp

RC Car Ramp Purpose This model is a ramp designed specifically for use with RC cars. The author created this design to fill a gap in the market, as they were unable to find a similar ramp available elsewhere. Practical Uses This ramp is intended to serve as an obstacle or incline for remote-controlled vehicles during play or testing. Included Parts - rampa.stl Printing and Assembly Guidance No specific printing parameters, material requirements, or assembly instructions are provided in the source documentation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC car bumper

RC car bumper

This model is an RC car bumper designed for recreational use with remote-controlled vehicles. Its primary purpose is to serve as a protective component for an RC car during operation. Practical uses include enhancing the aesthetic or functional setup of an RC car build. This part is intended for hobbyists looking to add specific bumper components to their RC vehicles. The package includes one STL file: rc car bumper (2).stl. No specific printing or assembly guidance is provided in the source documentation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hyper Go RC Car Shock Tower

Hyper Go RC Car Shock Tower

Hyper Go RC Car Shock Tower Purpose This model is a replacement shock tower designed for a Hyper Go RC car. It serves as a structural component intended to replace a damaged original part following a crash. Practical Uses This part is used to secure the shock absorbers and suspension arms on a Hyper Go RC vehicle. To install the component, the user must unscrew the shocks and the arms; the dismantling process requires 4 screws. Included Parts - car shock tower.stl - Part Studio 1.step

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hyper Go RC Car Control Arm

Hyper Go RC Car Control Arm

Hyper Go RC Car Control Arm Purpose This model is a replacement control arm designed for a Hyper Go RC car. The author created this part as a quick fix following a breakage caused by a motor upgrade. Practical Uses It serves as a functional repair component for RC car steering systems when the original control arm is damaged or broken. Included Parts - pt 2 control arm.stl Assembly Guidance To install this part, the user must dismantle the differential box and pull off the existing arm.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de HSW RC Car Wall Mount for Traxxas Rustler

HSW RC Car Wall Mount for Traxxas Rustler

HSW RC Car Wall Mount Purpose This model is a specialized mount designed for the Traxxas Rustler. It serves as a remix of the JR_Craftworks Mount, specifically modified to be compatible with the Honeycomb Storage Wall (HSW) system. Practical Uses This mount allows users to organize and display their Traxxas Rustler RC car by attaching it directly to a Honeycomb Storage Wall setup. Included Parts - RC Car HSW Mount (.3mf file) Printing and Assembly Guidance Users should note that this model is a remix of the JR_Craftworks Mount designed for HSW compatibility. Please refer to the provided .3mf file for specific printing configurations.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Axle

RC Car Axle

RC Car Axle Purpose This model is a replacement axle designed for an RC Mustang. The author created this part to replace a broken original component, aiming for a tight fit to prevent movement during operation. Practical Uses It is intended for use in RC cars. While designed for a Mustang, the author notes it should work for most RC cars, provided the hole sizes are adjusted to fit the specific vehicle type. Included Parts - Mustang Axle.stl Printing and Assembly Guidance The author suggests that hole sizes may need to be adjusted to ensure compatibility with specific vehicle types. Regarding durability, the author notes that the cylindrical pieces may be prone to breakage under heavy use or 'abuse.' A potential remix or improvement could involve adding more support to these cylindrical sections to increase longevity. During 'torture testing' involving rocks, dirt, and water, the part lasted approximately 40-60 minutes before breaking.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC car drive shaft

RC car drive shaft

RC car drive shaft Purpose This model is an RC car drive shaft designed to function as a component within a remote-controlled vehicle's drivetrain. Practical Uses It is intended for use in RC car repairs or custom builds where a replacement or specific drive shaft component is required to transmit rotational force. Included Parts - RC car drive shaft (STL file) Printing/Assembly Guidance No specific printing parameters, material requirements, or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Steering Knuckle for 1:8 Adventure Force Baja Brute

RC Car Steering Knuckle for 1:8 Adventure Force Baja Brute

RC car steering knuckle designed for "The Adventure Force Baja Brute (1:8) scale". Purpose This model is a replacement or upgrade steering knuckle specifically designed for the "The Adventure Force Baja Brute" RC vehicle at a 1:8 scale. Practical Uses It is intended for use in the steering assembly of the specified RC car model to facilitate directional control. Included Parts The model includes one file: - RC car arm.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Rear wing and reinforced supports for Corally Kagama RC Car

Rear wing and reinforced supports for Corally Kagama RC Car

Rear wing and reinforced supports designed for the Corally Kagama RC car. Purpose This model provides a replacement or upgrade rear wing assembly and reinforced supports specifically for the Corally Kagama RC car. Practical Uses Designed to improve the durability of the rear wing area, the author recommends printing these components in TPU to provide greater flexibility during use. Included Parts - aileron perso TPU.stl - support aileron V2.stl Assembly Guidance To attach the reinforced wing supports, 4x M3x20 screws are required.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Wall Mount (65mm Wheel Max Diameter)

RC Car Wall Mount (65mm Wheel Max Diameter)

RC CAR WALL MOUNT - 65mm WHEEL MAX Purpose This model is a quick, simple, and reliable wall mount designed for storing RC cars. While specifically designed for the MJX 14211, it is intended to be compatible with any RC car featuring a wheel diameter of up to 65mm. Practical Uses It serves as a storage solution for RC vehicles, ranging from 1/14 to 1/24 scale. The mount is designed to be secured to a wall using standard screws. Included Parts - 65mm wheel rc car WALL mount.stl Printing and Assembly Guidance To produce a second mount, the model must be mirrored. The mount is intended to be attached to a wall using standard screws.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Shock Absorber for 1:10 Scale Buggies

RC Car Shock Absorber for 1:10 Scale Buggies

RC car shock absorber Purpose This model is a simple, friction-type shock absorber designed for use in 1:10 scale RC buggies, such as The Marmot and similar vehicles. Practical Uses It serves as a functional suspension component for 1:10 scale RC buggy builds. Included Parts The model files include: - shock-bottom.stl - shock-top.stl - shock-frame25.stl - shock-frame30.stl - shock-frame35.stl - spacer-3x5.stl Assembly Guidance Assembly requires an M5 allen head bolt to be used for the stem. A metal spring is also required for operation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Printable Mustang RC Car Body Remix

Printable Mustang RC Car Body Remix

This model is a printable remix of a Mustang RC car outer body. The original source file was identified as unprintable, and this version has been modified to make the geometry suitable for 3D printing processes. **Purpose** The purpose of this model is to provide a functional, printable version of a Mustang RC car shell for hobbyists and RC enthusiasts. **Practical Uses** This model is intended for use in RC car projects, specifically for drift cars or general RC vehicle customization. It serves as an outer body shell for a remote-controlled vehicle. **Included Parts** The download includes the following file: * first success.stl **Printing/Assembly Guidance** No specific printing parameters or assembly instructions are provided in the source data. Users should refer to their own printer settings and RC chassis compatibility when preparing the file. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de HG Scaler RC Car Option Parts

HG Scaler RC Car Option Parts

This model set consists of option parts designed for the HG Scaler RC car. The set is intended to provide specific structural or suspension components for the vehicle. Practical uses for these parts include customizing or repairing the HG Scaler RC car's chassis or suspension setup. The set includes a Panhard support and a curved arm. Included parts: - Panhard support (Panhard_supp_Corto2.stl) - Curved arm (braccioo_curv2.stl) Note: No specific printing or assembly guidance is provided in the source documentation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de HG Scaler RC Car Option Parts

HG Scaler RC Car Option Parts

HG Scaler RC Car Option Parts Purpose This collection consists of various option parts designed for the HG Scaler RC car. These components serve as functional upgrades or replacement mounting points for the vehicle chassis. Practical Uses These parts are used to modify the suspension geometry and mounting configurations of the HG Scaler. Specifically, the C-hubs allow for an 8-degree caster angle, with one version providing a dedicated Panhard mount. Other parts facilitate the secure mounting of the body, battery, servo, and upper links. Included Parts The set includes the following STL files: - C-hub with 8 degrees caster - C-hub with 8 degrees caster (including a Panhard mount version) - Top body mount - Battery plate - Servo mount with Panhard hole - Upper link mount - Front body mount

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC car height adjustment part

RC car height adjustment part

Purpose: This model is designed for RC car height adjustment. Practical uses: It serves as a component for R/C vehicles to modify ride height. Included parts: - RCMitta.stl Printing guidance: The author used a Phrozen Sonic Mini 4K printer with Anycubic basic Resin Grey. Recommended settings include a 0.05 resolution and 100% infill. The author notes that any material can be used for this part. No rafts or supports were used in the author's print.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Shocks Tower for MJX Hyper Go 1:16 RC Car

Shocks Tower for MJX Hyper Go 1:16 RC Car

Purpose: This shock tower is designed for the MJX 1:16 scale Hyper Go buggy to connect the front shocks to the vehicle frame. Practical Uses: It serves as a replacement part for a broken shock tower. The design features a threaded hole intended to screw directly into the plastic without the use of a nut. Included Parts: - MJXHyperGoShocksTowerforRCCar.3mf - MJX Hyper Go Shocks Tower.stl Printing/Assembly Guidance: Orientation: Print with the forward-facing part (relative to the RC car) facing up. Supports: Use a raft and supports on the build plate only. Settings: The author used 100% infill and 10 wall layers. Materials: The author used ASA with a bed temperature of 100-105°C, 270°C for first layers, and 250°C thereafter. The author suggests PETG might also work. Assembly: The shock-attachment hole is slightly small and may require force to fit.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Drive Shaft for Maverick Phantom XT

RC Car Drive Shaft for Maverick Phantom XT

This is a revised drive shaft designed to fit the Maverick Phantom XT. This version features a thickened shaft portion intended to improve durability compared to previous iterations. The author notes that the original metal part was difficult to replace and that earlier printed versions twisted under torsional forces; this revised design is intended to address those issues. Practical uses include replacing lost or broken drive shafts in a Maverick Phantom XT RC car, specifically as an alternative when original parts are hard to find or expensive. Included parts: - rc car drive shaft.stl Printing and assembly guidance: The author recommends printing this model using PLA+ filament. To provide extra strength against torsional forces, the author recommends using an 80% infill setting. The author reports that this version has survived runs at full speed with twists and turns without damage.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC car Rear Wing with holder

RC car Rear Wing with holder

Purpose This model is an RC car rear wing designed for an RC car challenge. The design draws inspiration from both standard automotive wings and Formula 1 aerodynamics. Practical Uses The assembly serves as a rear wing component for RC racing vehicles. The author notes the design is thick enough to accommodate M3 screws on the wing adapter and M4 screws on the bottom. Included Parts The digital files include: - Rear Wing v2.1 v4.stl - Wing holder v2.stl - Wing adapter.stl - Pre-sliced Gcode files for Prusa i3 MK3 S+ (PLA material) Printing and Assembly Guidance The author reported successful printing results using a Prusa i3 MK3 S+ printer. Assembly requires M3 screws for the wing adapter and M4 screws for the bottom mounting.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC wall hanger

RC wall hanger

RC wall hanger Purpose This model is designed as a hanger for displaying RC cars on a wall. Practical Uses It serves as a mounting solution to showcase RC vehicles in a wall-mounted display. Included Parts - MeshBody1.stl Printing and Assembly Guidance The author suggests scaling the model as needed to fit the specific vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de MST Tire Inlays

MST Tire Inlays

MST Tire Inlays Purpose These models are designed specifically as tire inlays for MST 105mm x 30mm 1.9 tires. They are intended to provide internal structure or weight management within the tire assembly. Practical Uses There are two distinct versions available to accommodate different rim configurations: - Version One: Designed to fit with weights located around the rim. - Version Two: Designed for use with rims that do not have weights. Included Parts - INLAY Version One.stl - INLAY 53mm Version Two .stl Printing Guidance For optimal results, the following print settings are recommended: - Material: TPU95 - Infill: 8% - Walls: 2 - Layers: No Bottom or Top layers

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 3DSETS Bamboo Stand Remix

3DSETS Bamboo Stand Remix

3DSETS Bamboo - stand Purpose This model is a remix designed specifically to fit the 3DSETS bamboo. The primary modification from the original version is a shorter middle section. Practical Uses This stand is intended for use with RC crawlers or RC cars. According to the designer, the model works well when used with 110mm tires. Included Parts The model consists of three files: - Rear.stl - Front.stl - Center.stl Printing and Assembly Guidance The designer recommends printing with PLA using a 10% honeycomb infill pattern.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de BBS RS Sport RC Wheels

BBS RS Sport RC Wheels

BBS RS Sport wheels for RC. Purpose This model is designed to serve as a replacement or upgrade wheel set for RC (remote control) vehicles, specifically replicating the aesthetic of BBS RS Sport rims. Practical Uses These wheels are intended for use in RC car hobbyist applications, allowing users to customize the appearance of their scale models with a specific motorsport-inspired wheel design. Included Parts The model package includes the following file: - 2BBS RS SPORT 2.stl Printing and Assembly Guidance No specific printing parameters, material requirements, or assembly instructions are provided in the source data. Users should determine appropriate settings based on their specific RC vehicle scale and printer capabilities.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1/10 scale RC car wing

1/10 scale RC car wing

This model set consists of an RC car wing designed for 1/10 scale RC cars. The collection includes various components intended for aerodynamic styling or performance enhancement on scale vehicles. 1/10 scale RC car wing with mount. 1/10 scale RC cars. The files include several versions of the wing (Newwing1x6, Newwing1x6smal, Reely_Rex_X_Air_Attack_Spoiler_V2), mounting hardware (Heckspoilerhalteroben6mm), and various test parts or prototypes (Heckspoilerprobeteil200x8mm6mmholes). Please refer to the included README.txt for specific assembly or usage details provided by the author.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Steering Rod Head RC 1:14

Steering Rod Head RC 1:14

Lenkstangen Kopf RC 1:14 Purpose This model is a replacement head for a steering rod designed for a 1:14 scale RC car. The author created this part to replace an original component that had broken. Practical Uses It is intended for use in RC car repairs, specifically to restore the functionality of the steering linkage system when the factory steering rod head is damaged or non-functional. Included Parts The model is provided as a 3MF file titled "Lenkstangen Kopf.3mf."

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Gear 48 - 9 Spare Part

Gear 48 - 9 Spare Part

This is an RC car spare part identified as Gear 48 - 9. It is designed to serve as a replacement component for RC car models. Practical uses include repairing or maintaining RC vehicles that require this specific gear part. Included files: - Gear_Spare_Part_RC_Car.obj IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Receiver Box

RC Car Receiver Box

inbox rc Purpose This model is a protective box designed specifically for an RC car receiver. Practical Uses It serves as a housing to secure and protect the receiver component within an RC car setup. Included Parts - Box Recepteur.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 3D Printed RC car for TT Motors

3D Printed RC car for TT Motors

3D Printed RC car for TT Motors Purpose This model is a 3D printed RC chassis designed to accommodate TT motors. It serves as the initial version of a chassis intended for future adaptation to meet the specific requirements of a self-driving car project. Practical Uses This chassis is intended for use in remote-controlled (RC) vehicle builds and serves as a foundational platform for developing autonomous or self-driving car prototypes. Included Parts - ESP32 RC Body With TT Motor Mount.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Front Ravine 25KG servo arm

Front Ravine 25KG servo arm

This model is a redesigned servo arm specifically for a 25kg servo upgrade on the FTX Ravine. Purpose The arm is designed to accommodate a 25kg servo located at the front of the Ravine. Because the servo has been flipped in this configuration, the arm is designed with a shorter profile to suit the specific orientation. Practical Uses To allow for a full range of motion, the arm is designed to stand off from the steering arm by a significant distance. This clearance helps prevent mechanical interference during steering maneuvers. Included Parts The files provided include: - ravine front steer arm.3mf - rev1.2.step Attribution: danchee

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RLAARLO OMNI-TERMINATOR Roof protection

RLAARLO OMNI-TERMINATOR Roof protection

This model is designed as roof protection specifically for the RLAARLO OMNI-TERMINATOR. Purpose The primary purpose of this component is to provide protective coverage for the roof section of the RLAARLO OMNI-TERMINATOR vehicle. Practical Uses This part is intended for use on the RLAARLO OMNI-TERMINATOR RC car to shield the upper chassis area from potential impacts or debris during operation. Included Parts The listing includes one STL file: RLAARLO OMNI-TERMINATOR Roof protection.stl. Printing and Assembly No specific printing or assembly guidance is provided in the source documentation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Robak 2 Body Spoiler

Robak 2 Body Spoiler

Robak 2 Body Spoiler Purpose This model is designed to add a spoiler to the Robak 2. The author notes that while it is intended to look cool, it probably does not affect handling. Practical Uses This part serves as an aesthetic upgrade for the Robak 2 RC car. Included Parts - spoiler.stl - spoiler guide.stl Printing and Assembly Guidance The author states the spoiler should be printable without the use of supports. To install the spoiler, use the included guide to drill holes, then secure the part in place using 4 M3 screws and nuts. For added support, the guide piece can be glued in place.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de SG116MAX inside wheel

SG116MAX inside wheel

SG116MAX inside wheel Purpose This model is designed as a replacement inner wheel for the SG116MAX RC car. The design features added material specifically to account for the use of weaker filaments. Practical Uses It serves as a functional replacement part for maintaining or repairing an SG116MAX RC car, providing a reinforced option for users printing with less robust materials. Included Parts - SG116MAX Wheel.stl Printing and Assembly Guidance Not provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 7mm RC Wrench for Rims

7mm RC Wrench for Rims

This model is a nut wrench designed for use with RC rims. It features a 7.1mm hex aperture and is intended to facilitate maintenance on RC vehicles. Practical uses include tightening or loosening nuts on RC car rims. The author notes that the design is compatible with a metallic bit featuring an external shaft diameter of 12mm. Included parts: - chiave 7.stl Printing and assembly guidance: The author recommends printing the model in either PLA or PETG. To ensure durability, the hex zone must be printed with 100% infill; the author achieved this by using 5 wall loops with a modifier. If a different hex size is required, the author offers to publish a new model if the desired hex size and the maximum external shaft diameter are specified.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Mini-Z Jomurema Body Clip light V2 - Drak

Mini-Z Jomurema Body Clip light V2 - Drak

Mini-Z Jomurema Body Clip light V2 - Drak Purpose This model is a lightweight body clip designed for Mini-Z RC cars. The author provides specific print profiles intended to produce super strong parts with high-quality layer bonding. Practical Uses This part is used as a body clip for RC car applications. The author notes that using PCTG filament results in high strength and excellent layer adhesion. Included Parts The download includes the following files: - Jomurema_Body_Clip_lightweight_V2 Custom Supports.stl - PCTG with PLA Supports (super strong print) Bambu Studio Bambu Lab H2D.3mf - PLA with PETG Supports Bambu Studio Bambu Lab H2D.3mf Printing and Assembly Guidance The author provides ready-to-use print profiles specifically for Bambu Lab printers. Two distinct printing methods are offered: 1. Printing with PCTG filament using PLA as a support material for maximum strength. 2. Printing with PLA filament using PETG as a support material. Custom supports have been added to the model to assist with the printing process.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1:8 RC Car Shock Stand Refill Jig for Arrma

1:8 RC Car Shock Stand Refill Jig for Arrma

1:8 RC Car Shock Stand Refill Jig for Arrma Purpose This jig is designed to hold the shocks of a 1:8 scale RC car during the refilling process. Its primary function is to hold the components in place to allow air bubbles to rise to the surface. Practical Uses It is used specifically during the maintenance and refilling of RC car shocks to ensure air bubbles are properly removed from the fluid. Included Parts * schock_stand.stl * schock_stand_prusa_0.3mm_PLA_MK3_5h53m.gcode

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de M4 Locking Nuts, standard and low profile

M4 Locking Nuts, standard and low profile

M4 Locking Nuts, standard and low profile Purpose These files are designed to provide locking nuts specifically for use with RC car wheel axles. Practical Uses They serve as replacement or custom lugnuts for RC car wheel assemblies. Included Parts - lock-m4-nut-lowprofile.stl - lock-m4-nut-standard.stl Printing Guidance The author recommends printing these parts using a 0.25mm nozzle with a 0.10mm layer height and 100% infill.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Trailer tow bar

Trailer tow bar

Trailer tow bar Purpose This model is a functional trailer tow bar designed specifically for use with a 1/10 scale RC car. Practical Uses It serves as a scale accessory for RC vehicles, allowing them to tow compatible trailers. Included Parts - TTB-2.stl - TTB-1.stl - TTB sphere.stl - TTB lever.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de TS4N 44T and 41T Replacement gear

TS4N 44T and 41T Replacement gear

TS4N 44T and 41T Replacement gear Purpose These files are designed as replacement gears for an RC car. The author originally created these parts as a temporary fix to use while waiting for original components to arrive. Practical Uses These gears can be used to replace broken second gears in a TS4N RC car. The set includes two different tooth counts to accommodate specific needs. Included Parts - TS4N 44T Gear.stl - TS4n_41T_gear.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC10 GT Radio Box

RC10 GT Radio Box

RC10 GT Radio Box Purpose This model consists of a receiver box and a matching lid designed for use with RC10 GT or GT2 RC cars. Practical Uses It serves as a housing for radio components within an RC10 GT or GT2 RC car setup. Included Parts - Associated Receiver Box-Body.stl - Associated Receiver Box-Lid.stl Assembly Guidance The lid requires 4 small screws for attachment to the receiver box body.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Part (wheel bracket, maybe?)

RC Car Part (wheel bracket, maybe?)

This model was created to serve as an identical opposite part for a broken RC car component. The author suggests it may be part of a steering bracket, possibly for a Tamiya vehicle. Practical uses include replacing broken components in RC cars where a mirrored version of the original part is required. Included files: - rc_car_part.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Car Shock Cap

RC Car Shock Cap

This model is an RC car shock cap. The author states it is valid for the Serpent SRX8 and suggests it could work for other brands. Included files: - shock stop.step - shock stop.stl IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Simple RC buggy

Simple RC buggy

Simple RC Buggy Purpose This design provides a complete R/C car body and chassis intended for easy 3D printing. The model is specifically engineered to be printed without the use of supports. Practical Uses This kit is designed to house four N20 micro gearmotors. The chassis includes a dedicated cut-away for an on/off switch and features mounting holes compatible with Pololu or similar mounting brackets. While designed for N20 motors, the provided OpenSCAD files allow for modifications to accommodate different motors or axles. Included Parts The package includes STL files for the RC Buggy body and the RC Buggy chassis, as well as the corresponding OpenSCAD files for customization. Printing and Assembly Guidance The author states that the STL files are oriented correctly to allow for printing without supports. For the body, the author recommends using a brim. The body and chassis are designed to have a snug fit, with an option to secure them together using two self-tapping screws. The author successfully printed the model in PLA using a Cocoon Create Touch (Wanhao Duplicator i3 plus clone).

Technology
Sin probar
material
—
Difficulty
Sin especificar