4 tagged models · Page 1 of 1

#parts

Discover 3D models tagged parts and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

RC Car Axle

RC Car Axle Purpose This model is a replacement axle designed for an RC Mustang. The author created this part to replace a broken original component, aiming for a tight fit to prevent movement during operation. Practical Uses It is intended for use in RC cars. While designed for a Mustang, the author notes it should work for most RC cars, provided the hole sizes are adjusted to fit the specific vehicle type. Included Parts - Mustang Axle.stl Printing and Assembly Guidance The author suggests that hole sizes may need to be adjusted to ensure compatibility with specific vehicle types. Regarding durability, the author notes that the cylindrical pieces may be prone to breakage under heavy use or 'abuse.' A potential remix or improvement could involve adding more support to these cylindrical sections to increase longevity. During 'torture testing' involving rocks, dirt, and water, the part lasted approximately 40-60 minutes before breaking.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Mirror for 1:10 Carisma Coyote RC Crawler

Mirror RC Crawler 1:10 Coyote carisma Purpose This model is a scale mirror designed specifically for the 1:10 scale Carisma Coyote RC crawler. Practical Uses It serves as a scale accessory for RC crawler enthusiasts looking to enhance the realism of their Carisma Coyote models. Included Parts - lusterko coyot scalone.stl Printing and Assembly Guidance The author instructs that the model should be printed at 1000% scale.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

FMS Ranger 1800mm Nose Gear

FMS Ranger 1800mm Nose Gear Replacement Purpose This model is a 3D printed replacement part designed for the FMS Ranger 1800mm. It serves as a more durable alternative to the original aluminum gear, which the author notes can easily break during rough landings. Practical Uses This part is intended to help absorb impacts during landings, reducing the risk of breakage. It provides a practical solution for maintaining the performance of the FMS Ranger on various surfaces. Included Parts - FMS_Ranger_Nose_Gear.stl Printing and Assembly Guidance The design is intended to fit directly onto the original nose gear axle, allowing for installation without modifications. For printing, the author recommends using a strong, flexible filament to assist with impact absorption. To achieve maximum rigidity, the part should be printed with 100% infill.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Junkers Ju 87 Stuka — 3D Printable RC Aircraft

A Stuka-inspired aircraft with a distinctive bent wing and propeller-driven layout. This smaller package contains eleven STL files; inspect their coverage before treating it as a complete airframe. PACKAGE CONTENTS 11 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar