2 tagged models · Page 1 of 1

#robak 2

Discover 3D models tagged robak 2 and check their print information, files and terms before downloading.Search this tag in the catalogue →

Juguetes y juegosFree

Robak 2 Body Spoiler

Robak 2 Body Spoiler Purpose This model is designed to add a spoiler to the Robak 2. The author notes that while it is intended to look cool, it probably does not affect handling. Practical Uses This part serves as an aesthetic upgrade for the Robak 2 RC car. Included Parts - spoiler.stl - spoiler guide.stl Printing and Assembly Guidance The author states the spoiler should be printable without the use of supports. To install the spoiler, use the included guide to drill holes, then secure the part in place using 4 M3 screws and nuts. For added support, the guide piece can be glued in place.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Reduction Gears for Robak 2

Purpose This modification provides a 19:1 gear reduction for the Robak 2, designed to increase torque while reducing top speed. This setup aims to improve acceleration, climbing capacity, and energy efficiency at low speeds, while reducing motor startup hesitation in sensorless configurations. Practical Uses The gear set is intended for use in the Robak 2 to enhance low-speed performance and climbing capabilities. Included Parts - Sleeve.stl - MotorPlate.stl - Gear1_13T.stl - Gear2_31T.stl - Gear3_14T.stl - Gear4_38T.stl - TopDeckR.stl Assembly Guidance Users must print the updated version of the TopDeck rear. Assembly requires removing a thin piece of plastic from the Chassis using pliers. Required hardware includes various M3 and M4 screws, nuts, a brass standoff, and specific bearings (3x 15x10x4mm and 2x 10x5x4mm).

Technology: Sin probar
material: —
Difficulty: Sin especificar