18 tagged models · Page 1 of 1

#1/10 scale

Discover 3D models tagged 1/10 scale and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

1/10 Scale RC Trailer Toolbox

1/10 SCALE RC TRAILER TOOLBOX Purpose This model is a 1/10 scale tool box designed specifically for use with RC trailers. Practical Uses It serves as a scale accessory for RC trailers. The design includes optional holes in both the lid and the box to allow for the mounting of small magnets to assist with a more secure closure. The author utilized specific magnets from https://a.co/d/7kLJESv for this purpose. Included Parts - Tool Box Lid v5.stl - RC Trailer Tool Box v5.stl Printing and Assembly Guidance For printing, the author recommends using 100% infill and notes that no supports are required. When printing the lid, ensure it is positioned with the top surface flat on the print bed. The author used PLA material for the printed model.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Badger Updated Rear Wing

This model is a larger rear wing designed specifically for the 1/10 scale Badger FWD printable RC buggy. It features a hybrid design that combines elements of the MKUltra's larger wing with the Badger's specific wing and mounts, which has been shortened and adjusted for an aesthetically pleasing fit. Practical uses include upgrading the aesthetic and scale appearance of the 1/10 scale Badger FWD RC buggy. The original buggy plans are available separately via the author's Cults3D page. Included parts: - badger_JRP_WING.stl Printing and assembly guidance: The author reports printing this model using PLA+ with 2 layers. Users are advised to choose their own preferred materials and settings.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

1:10 Scale RC Snow and Ice Tires

rc car 1:10 snow/ice tires Purpose These models are designed to function as snow and ice tires for 1:10 scale RC cars. They were created to provide traction in snowy conditions where standard tires may struggle. Practical Uses These tires are intended for use on RC vehicles operating in snow or icy environments. The set includes two different configurations: the front tires and the back tires. The back tire models feature larger paddles, though the user may choose which configuration to use for specific axles based on preference. Included Parts - snow_tires_front.stl - snow_tires_back.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

1:10 RC Crawler Trailer

1:10 RC Crawler Trailer Purpose This 3D model is an RC trailer designed for 1:10 scale vehicles. It is optimized for off-road use, featuring high ground clearance and stable handling characteristics intended for rough terrain and higher driving speeds. Practical Uses Designed for off-road applications, the trailer is suitable for crawling and driving at higher speeds over uneven surfaces. The author has specifically tested this model with the Tamiya CC-01 Amarok. Included Parts The download consists of four STL files (1.stl, 2.stl, 3.stl, and 4.stl). Required Additional Parts (Not Included) To complete the assembly, the following hardware and components are required: - Ball bearing set for Tamiya DT-02 / DT-03 (4 ball bearings) - 4× M3 screws (approximately 20 mm in length) - M3 nuts - Tamiya ball head coupling (or a compatible alternative)

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

1:10 RC Wheel Hub Cap for M4 Locknut

1:10 RC Wheel Hub Cap Purpose This model is a simple hub cap designed specifically for 1:10 scale RC wheels. Its primary function is to cover the wheel center, secured via an M4 locknut. Practical Uses It is intended for use in 1:10 scale remote-controlled vehicle applications where a wheel cap is required for aesthetic or functional coverage. The author notes that the fit is very tight. Included Parts - WheelCap.step - WheelCap - V1.stl Printing and Assembly Guidance The author used Polypropylene (PP) for their print. They suggest using a somewhat flexible material for the best results, though they note that results may vary (YMMV). Assembly requires an M4 locknut for mounting.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Drift Track Curb (1:10 Scale)

RC Drift Track Purpose This model is designed to create a 1:10 scale RC drift track curb. It provides a modular way to build track boundaries for remote-controlled drifting. Practical Uses These curbs are intended for use in 1:10 scale RC drift racing environments to define track edges and layout geometry. Included Parts The set includes two STL files: RC_Track.stl and RC_Track_2.stl. The two versions offer different design options; one version features a specific hole design intended to save approximately 14% filament per section. Specifications The track curb is designed with a 950mm diameter.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Mirror for 1:10 Carisma Coyote RC Crawler

Mirror RC Crawler 1:10 Coyote carisma Purpose This model is a scale mirror designed specifically for the 1:10 scale Carisma Coyote RC crawler. Practical Uses It serves as a scale accessory for RC crawler enthusiasts looking to enhance the realism of their Carisma Coyote models. Included Parts - lusterko coyot scalone.stl Printing and Assembly Guidance The author instructs that the model should be printed at 1000% scale.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Arte y esculturaFree

Formula 1 RC Car Hanger (1:10 Scale Maisto Model)

Formula 1 RC Car Hanger Purpose This model is a single-piece hanger designed specifically to display the Maisto Formula 1 Racing RC car. It is intended for the 1:10 scale version of this vehicle, which is commonly sold at Costco. Practical Uses This hanger provides a dedicated mounting solution for enthusiasts looking to hang and display their 1:10 scale Maisto Formula 1 RC car. Included Parts The model consists of one part: rcFormula1Hanger1.3.stl. Printing and Assembly This is a one-piece design.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

RC 1/10 Malaysia License Plates

RC 1/10 Plate Malaysia Purpose This model set provides RC license plates designed specifically for 1/10 scale vehicles. The plates are styled after Malaysian license plate formats. Practical Uses These plates are intended for use as scale accessories on 1/10 scale RC cars to enhance realism and provide a localized aesthetic. Included Parts The set includes two distinct STL files representing different plate shapes: - plate panjang.stl (long plate) - plate petak.stl (square plate) Printing and Assembly Guidance Users should refer to their specific 3D printer settings for 1/10 scale accessories. No specific assembly instructions are provided in the source data.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Car Shock Absorber for 1:10 Scale Buggies

RC car shock absorber Purpose This model is a simple, friction-type shock absorber designed for use in 1:10 scale RC buggies, such as The Marmot and similar vehicles. Practical Uses It serves as a functional suspension component for 1:10 scale RC buggy builds. Included Parts The model files include: - shock-bottom.stl - shock-top.stl - shock-frame25.stl - shock-frame30.stl - shock-frame35.stl - spacer-3x5.stl Assembly Guidance Assembly requires an M5 allen head bolt to be used for the stem. A metal spring is also required for operation.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

250th USA Anniversary 1/10 Scale RC Car License Plate

250th USA anniversary 1/10 scale RC car license plate Purpose This model is designed for users who wish to add a decorative element to their 1:10 scale RC cars to commemorate a specific occasion. Practical Uses It is intended for use on all 1:10 scale RC cars as an accessory. Included Parts - 1 x 1/10 scale RC car 250 USA anniversary plate (.stl) Printing and Assembly Guidance The source recommends printing this model using 100% infill.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC car GECKO test part

RC car GECKO test part Purpose This component serves as a calibration and test part for the GECKO 1:10 scale expedition RC crawler. It is designed to verify if a printer is properly set up to handle the complexity of the full GECKO model. Specifically, it allows users to test their ability to remove supports and achieve precise tolerances before committing to the complete build. Practical Uses Users can utilize this part to assess their printing experience and ensure their machine can produce the detailed components required for the full car. A primary use is testing bearing fitment; the part is designed to verify if a 10x15x4mm bearing can be inserted so that it fits securely without being loose. Included Parts - Mask v12.stl - Bearing test.stl Printing and Assembly Guidance It is suggested to print this part to determine if you can easily remove supports from the model. For assembly testing, attempt to insert a 10x15x4mm bearing into the printed part. According to the author, the bearing must fit while remaining snug and not loose. Detailed user guides are available in English and Czech via the provided documentation links.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Juguetes y juegosFree

RC Tires Storage Box

RC Tires Storage Box Purpose This model is a storage box designed specifically for 1/10 scale RC tires. According to the author, storing tires inside this box helps them last longer by preventing them from coming into contact with any surfaces. Practical Uses It is intended for the organized storage of 1/10 scale RC wheels and tires, making it suitable for hobbyists using various RC platforms. Included Parts The set includes 12mm hex adapters to facilitate storage. Files Included tirebox.3mf

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Trailer tow bar

Trailer tow bar Purpose This model is a functional trailer tow bar designed specifically for use with a 1/10 scale RC car. Practical Uses It serves as a scale accessory for RC vehicles, allowing them to tow compatible trailers. Included Parts - TTB-2.stl - TTB-1.stl - TTB sphere.stl - TTB lever.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

1:10 OpenRC F1 2023 RC Car — 3D Printable STL Parts

Create your next open-wheel RC project with this 1:10 OpenRC F1 2023 parts package. The download contains 37 STL files for the body, chassis, steering, rear drivetrain, wings, wheels and detail parts. Included components: • Body and frame: center body, front/rear chassis plates, rear chassis, front vented section, lid and motor cover • Front steering module: upper/lower parts, front block, wheel axle, left/right hubs, servo saver and steering push pin • Rear drive: rear axle, pinion and spur gears, and left/right wheel axle holders • Aero and details: nose, front and rear wings, halo, mirrors, camera, shark fin and rain-light diffuser • Wheels: front/rear rims, front/rear tires and wheel lock nut • Extra parts: vented lid and servo holder Original author: Lucas. License: CC0. Filenames have been standardized in English; the supplied geometry is unchanged. Digital files only. Electronics and non-printed hardware are not included. No assembly guide, hardware bill of materials or tested print settings were supplied in this folder. Inspect each part in your slicer and check fit, quantities and compatibility before printing and assembly. The supplied cover is an AI-generated illustration, not a photograph of a verified assembled model.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Swivel Side Mirror Kit for 1:10 RC Vehicles

Add a rounded rectangular side mirror to a 1:10 RC vehicle build. This printable accessory combines a mirror housing with a short ball-ended stem and a separate mounting base with a split spherical socket. The two-part connection provides the geometry for an adjustable mirror assembly. The download contains two STL files: 01-side-mirror-mount.stl for the mounting base and socket, and 02-side-mirror-housing.stl for the mirror body and ball-ended stem. The geometry is preserved from the purchased source package; the files have been renamed in English for easier identification. This is a vehicle detail accessory, rather than a complete RC vehicle or electronic component. Check the fit of the ball and socket after printing and compare the base with your intended body mounting surface before attachment. Exact vehicle compatibility, fastening method and print settings are not documented in the supplied package. Material, orientation and any supports should be selected after inspecting the geometry in your slicer. Do not assume that resizing the parts will preserve the joint clearance. The cover is an AI-generated visualization created by MESHOPIA using the supplied model reference. Its navy color, reflective finish, lighting and background illustrate a possible finished appearance; the download contains printable geometry only.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Multi-Spoke Wheel Rim for 1:10 RC Cars

A printable wheel rim for a 1:10 RC car, with a recessed multi-spoke center, hexagonal drive socket and raised circumferential bands around the barrel. The supplied STL contains a single rim. The reference shows the rim fitted to a rally-style RC vehicle, while the download provides the rim geometry only. The package contains 01-multi-spoke-wheel-rim.stl, renamed in English without changing its geometry. A tire, axle, fasteners and vehicle are not included. The original filename identifies the design as RCOZ2; specific tire dimensions, drive-hex size and vehicle compatibility have not been verified. Measure the model in your slicer and compare its interfaces with your intended running gear before printing. Print orientation, material and supports should be chosen after inspecting the model. No printing settings or physical fit tests are documented in the supplied package. The drive socket and original geometry are retained; color, surface finish, lighting and background illustrate a possible appearance.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Raised-Side Roof Basket for 1:10 RC Vehicles - Two Variants

Add a roof basket detail to a 1:10 RC vehicle. The model has a rectangular platform with elongated open slots, rounded perimeter rails, upright side supports and circular features along one side. The source photograph shows the basket mounted above an off-road-style RC body. The download contains the basket geometry only. Two STL variants are supplied, originally labeled 12x15cm and 12x16.5cm. They have been renamed 01-roof-basket-12x15-label.stl and 02-roof-basket-12x16-5-label.stl. These sizes are source labels rather than independently verified installed dimensions; inspect and measure the files in your slicer before selecting a variant. Both files retain their original geometry. The vehicle, cargo and separate fastening hardware are not included. The package does not document a specific mounting procedure, verified fit to a named vehicle, load rating or tested printing settings. Compare the basket footprint and attachment features with your own body before printing. Select orientation, supports and material for your intended use. Its color, surface finish, lighting and background illustrate a possible appearance.The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar