12 tagged models · Page 1 of 1

#wall mount

Discover 3D models tagged wall mount and check their print information, files and terms before downloading.Search this tag in the catalogue →

ElectrónicaFree

Remote control holder

Remote Control Holder Purpose This model is a wall-mounted holder specifically designed to store and organize a remote control. Practical Uses It serves as a dedicated mounting solution to keep a TV or device remote easily accessible while reducing clutter on surfaces. Included Parts - porta telecomando.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

Sharp XL-B510 Remote Controller Wall Mount Holder

sharp remote controller holder Purpose This model is a wall mount holder specifically designed to store and organize a Sharp remote controller. Practical Uses It serves as a dedicated mounting solution for the Sharp XL-B510 remote controller, providing a fixed location on a wall to prevent loss or clutter. Included Parts * sharp holder.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology: Sin probar
material: —
Difficulty: Sin especificar

OrganizaciónFree

RC Car Wall Mount (65mm Wheel Max Diameter)

RC CAR WALL MOUNT - 65mm WHEEL MAX Purpose This model is a quick, simple, and reliable wall mount designed for storing RC cars. While specifically designed for the MJX 14211, it is intended to be compatible with any RC car featuring a wheel diameter of up to 65mm. Practical Uses It serves as a storage solution for RC vehicles, ranging from 1/14 to 1/24 scale. The mount is designed to be secured to a wall using standard screws. Included Parts - 65mm wheel rc car WALL mount.stl Printing and Assembly Guidance To produce a second mount, the model must be mirrored. The mount is intended to be attached to a wall using standard screws.

Technology: Sin probar
material: —
Difficulty: Sin especificar

OrganizaciónFree

FMS 1/24 RC Rock Crawler Wall Mount

FMS 1/24 RC Rock Crawler Wall Mount Purpose This model is a wall mount designed specifically for FMS 1/24 scale crawlers. It serves as an organizer to hang RC vehicles on a wall. Practical Uses While designed for FMS 1/24 models, the author notes it will probably work on other small crawlers, such as the SCX24 and SCX30. Included Parts - 1.24 CRAWLER WALL MOUNT.stl Printing and Assembly Guidance To obtain the complete mount, the model must be mirrored to create the second part. No further assembly or printing instructions are provided in the source text.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Arte y esculturaFree

Universal RC Car Wall Hanger (1/8 to 1/16 Scale)

RC Car Wall Hanger - universal, fits from 1/8 down to 1/16 Purpose This model is a universal wall hanger designed specifically for RC cars. It was created to provide a custom storage solution for radio-controlled vehicles. Practical Uses It is intended for mounting RC cars on a wall. The design is compatible with various scales, specifically fitting models from 1/8 scale down to 1/16 scale. Included Parts - rch2.STL Printing and Assembly Guidance Based on the author's testing, the part can be printed using PETG with 15% infill and standard settings. On a Bambu Lab P1S, the author reported a print time of approximately 1 hour and 20 minutes per unit, resulting in a strong part with efficient material usage.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Volantex P51D Wall Mount

Volantex P51D Wall Mount Purpose This model is a custom-designed wall mount specifically created for the RC Volantex 500mm P51D aircraft. Practical Uses It serves as a dedicated storage solution to display or hold the RC aircraft on a wall. The design includes a large tab located under the tail wheel support, which the author intends to be used with a 5lb command strip for mounting. Included Parts - Tail_Wheel_Support.stl - Main_Wheel_Support.stl Printing and Assembly Guidance The mount is composed of two separate printed pieces. Assembly requires a single M3 screw to connect the components. The author reports printing the parts using PLA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

ElectrónicaFree

Generic DC Power Supply Wall Mount

Generic DC Power Supply Wall Mount Purpose This model is a case designed to enclose a generic 12V power supply unit (PSU) and mount it to a wall. It is intended to fit most standard standalone power supplies used in 3D printing, such as Mean Well models. The design features ventilation holes, though one side lacks holes to prevent dust collection inside the PSU. A specific hole is included to allow visibility of the status indicator light. Practical Uses This case is used for organizing and securing power supplies on a sturdy surface. It allows for easy access to connectors while keeping the unit enclosed. The design includes a cap to close off the open side of the case. Included Parts - Power Supply Mount - Case - Power Supply Mount - Cap Printing and Assembly Guidance For printing the case, use tree supports and an infill of ≥ 15% with ≥ 2 walls. When printing the cap, it is recommended to print at under 100% scale depending on your printer's accuracy and filament. Users should consider the thermal properties of their chosen filament against the heat generated by the PSU. To assemble, disconnect the power, install the case on a surface using screws (5mm diameter holes), and slide the PSU in so connectors are accessible and ventilation patterns match. If using the cap, snap it into place via friction fit. To remove the PSU, disconnect power and push the unit from the covered side; if the cap is installed, it should pop off with the force of the PSU.

Technology: Sin probar
material: —
Difficulty: Sin especificar

OtrosFree

Remote Midea AC Multiboard Multiconnect Holder

This model is a dedicated holder designed to keep a Midea AC remote organized on a Multiboard wall. The author has modified the design to include a Multiconnect feature, specifically allowing for integration and use on a Multiboard system. Additionally, the model has been shortened by the author to reduce filament consumption during printing. Practical uses for this model include mounting a Midea air conditioning remote directly to a Multiboard wall setup to ensure it remains accessible and organized. Included parts: - remote_Midea AC Multiboard multiconnect.3mf

Technology: Sin probar
material: —
Difficulty: Sin especificar

OrganizaciónFree

RC Airplane Wall Hanger (AIRHANG)

The AIRHANG system is a wall support designed for RC airplanes. Its primary purpose is to keep aircraft safe by storing them off the ground and away from workbenches. According to the source, the system is capable of holding all sizes and weights of RC planes securely to a wall. 1. Practical Uses: This system serves as a wall-mounted storage solution for hobbyists to organize and protect their RC airplane collections. 2. Included Parts: The provided files include AIRHANG2.stl, SLOPE PEG v1.stl, CESSNA SR22T.stl, CONSCENDO.stl, DECATHALON.stl, EC 1500 AIRHANG RIGHT.stl, and CESSNA SR22T AIRHANG RIGHT.stl.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Plane Holder

RC Plane Holder Purpose This model is a wall-mounted bracket designed to hold a Sky Surfer RC plane. It serves as a storage solution to keep the aircraft secure while displayed on a wall. Practical Uses It is intended for hobbyists looking for a dedicated wall mount to organize and display their Sky Surfer model planes. Included Parts - holder for sky-surfer.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Traxxas Mini E Revo Wall Mount

Traxxas Mini E Revo Wall Mount Purpose This model is a basic wall mount designed specifically for the Traxxas Mini E Revo. Its primary function is to increase storage space and serve as a decorative display piece for your RC vehicle. Practical Uses Users can utilize this mount to organize hobby space by keeping the Traxxas Mini E Revo off flat surfaces and mounted securely to a wall. Included Parts The digital files provided for this model include: - ERevo Mini -Mount.3mf - ERevo Mini -Mount.stl Assembly Guidance This is a basic wall mount that requires additional hardware for installation. The author does not specify the exact type or dimensions of hardware needed.

Technology: Sin probar
material: —
Difficulty: Sin especificar

HerramientasFree

Wall Mounted Hepa Filter Holder Elegoo CC

Technology: Sin probar
material: —
Difficulty: Sin especificar