Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

3 tagged models · Page 1 of 1

#robak

Discover 3D models tagged robak and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Robak 2 Body Spoiler

Robak 2 Body Spoiler

Robak 2 Body Spoiler Purpose This model is designed to add a spoiler to the Robak 2. The author notes that while it is intended to look cool, it probably does not affect handling. Practical Uses This part serves as an aesthetic upgrade for the Robak 2 RC car. Included Parts - spoiler.stl - spoiler guide.stl Printing and Assembly Guidance The author states the spoiler should be printable without the use of supports. To install the spoiler, use the included guide to drill holes, then secure the part in place using 4 M3 screws and nuts. For added support, the guide piece can be glued in place.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Rims for Robak or HSP88005

Rims for Robak or HSP88005

Rims for Robak or HSP88005 Purpose This model provides four different rim designs intended for use with the Robak or HSP88005. The author notes that while the rims have been printed, they have not been fully tested. Practical Uses These rims are designed for RC car applications. The author suggests that while they were printed using PETG, a hard TPU material will likely provide longer durability. Included Parts - Rim_V1.stl - Rim_V2.stl - Rim_V3.stl - Rim_V4.stl Printing and Assembly Guidance To prevent supports from entering the hex socket, the middle hole is covered with a 0.2mm layer during printing. After printing, use a knife to cut the hole open. Recommended print settings include: - Orientation: Lay flat on the bed with the outer design facing up. - Layer Height: 0.2mm - Walls: 5 - Infill: 40% - Supports: On (Caution: Do not allow supports to cover the inside of the hex socket). Attribution: Source provided by author.

Technology
Sin probar
material
—
Difficulty
Sin especificar