Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

5 tagged models · Page 1 of 1

#stand

Discover 3D models tagged stand and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de 3DSETS Bamboo Stand Remix

3DSETS Bamboo Stand Remix

3DSETS Bamboo - stand Purpose This model is a remix designed specifically to fit the 3DSETS bamboo. The primary modification from the original version is a shorter middle section. Practical Uses This stand is intended for use with RC crawlers or RC cars. According to the designer, the model works well when used with 110mm tires. Included Parts The model consists of three files: - Rear.stl - Front.stl - Center.stl Printing and Assembly Guidance The designer recommends printing with PLA using a 10% honeycomb infill pattern.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DJI RC-N Style Grab Stand

DJI RC-N Style Grab Stand

DJI RC-N Style Grab Stand Purpose This modular accessory is designed to snap onto DJI RC-N style controllers. It serves a dual purpose as a grab handle to make the controller easier to pick up and hold, and as a stand for stable placement. Practical Uses In addition to improving grip, the device functions as a stand. To prevent the grab-stand from rocking, the set includes a small component that slides into a slot and utilizes a notch to hold it securely in place. This model is also compatible with the Hanatora RC-N3 N2 N1 N1C Remote Controller 4.7-12.9 Inch Tablet Holder Mount. Included Parts The package includes the following files: - DJI_RCN_MainBody_Support_Slide_V5.stl - DJI_RCN_MainBody_Hanatora_Tablet_Stand_V4.stl (includes slots for aesthetics) - DJI_RCN_MainBody_Hanatora_Tablet_Stand_V3.stl Printing and Assembly Guidance The author updated the stabilizer bar (V5) to improve fit and made one side flat to facilitate easier printing. Assembly involves snapping the main body onto the controller and sliding the support piece into the designated slot to stabilize the stand.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Stand Arrows Viper Jet

Stand Arrows Viper Jet

Stand Arrows Viper Jet Purpose This model is a dedicated stand designed for the Arrows Viper Jet. It provides a way to display the small jet either resting on the floor or mounted to a wall using screws. Practical Uses It serves as a display solution for RC enthusiasts, allowing for stable floor placement or vertical wall mounting to showcase the aircraft. Included Parts - Stand_Arrows_Viper_Jet.stl Printing and Assembly Guidance The author suggests using PLA, PETG, or an equivalent material. For optimal stability, the author recommends printing with 3 lines and a high infill setting.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Filament Stand

Filament Stand

Filament Stand Purpose This model provides the components necessary to build a multi-level stand designed for organizing filament rolls. Practical Uses When configured with 1200mm long dowels and a distance of 738mm between supports, the stand can accommodate 16 filament rolls on a single level. Included Parts The model includes the following STL files: - Podstawa.stl - Baza.stl - Rama.stl Required Hardware To complete the assembly, the following shopping list is required: - 4x 18mm x 2400mm pine dowels (Castorama) - 22x M4 x 20mm screws - 4x M4 x 16mm screws - 16x 12mm x 6mm wood screws

Technology
Sin probar
material
—
Difficulty
Sin especificar