Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

5 tagged models · Page 1 of 1

#steering

Discover 3D models tagged steering and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Arrma Grom Typhon Servo Arm

Arrma Grom Typhon Servo Arm

Arrma Grom Typhon Servo Arm Purpose This model is a replacement servo arm designed for the Arrma Typhon Grom. It was created as an alternative to purchasing an original part after the stock component broke. Practical Uses It is intended for use in RC steering systems to restore functionality to an Arrma Typhon Grom vehicle. Included Parts - Arrma Grom Servo Arm v3.stl Printing and Assembly Guidance The author used PLA for the print. Regarding assembly, the specified order is to place the arm on first, followed by a tiny spring, and then the screw. The author notes uncertainty regarding the long-term durability of the part.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks Purpose These hooks are designed specifically as replacement parts for the MJX HYPER GO RX RC car. Practical Uses They serve as replacement steering arm and suspension hooks for the MJX HYPER GO model. Included Parts - MJX HYPER GO steering arm hook - MJX HYPER GO suspension hook Printing and Assembly Guidance The author recommends printing the hooks in a horizontal orientation for best results. Based on the author's reported settings using eSun PETG-CF filament, the following parameters were used: - Infill: 100% with concentric patterns - Speed: 50mm/s constant speed for all printing fields - Temperature: 255°C nozzle / 70°C bed Users may refer to the provided QiDi studio setting screenshots for additional configuration details.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de MN82 Steering mod

MN82 Steering mod

MN82 Steering mod Purpose This modification is designed for the MN82 RC model to increase the available steering angle. It achieves this by allowing the user to utilize the last bolt holes of the servo. Practical Uses This mod is intended for RC enthusiasts looking to improve the maneuverability of their MN82 vehicles. While the designer based the geometry on the MN82T variant, they indicate it is likely compatible with other MN82 variants. Included Parts - steering v4.stl Printing and Assembly Guidance Assembly involves repositioning the servo to use the furthest available bolt holes to facilitate the increased steering range. Please note that compatibility with non-T variants is based on the designer's assessment.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

Build a custom RC car with this downloadable set of 24 STL files. The package includes two chassis variants with 160 mm and 180 mm wheelbases, plus drivetrain, steering, wheel and mounting components. Included parts: • Chassis: 160 mm and 180 mm wheelbase options • Main-shaft and motor gears, gear sleeve and axle transmission gears • Universal joints A/B/C and dogbone drive shafts • Front/rear axles, wheel axles, wheel brackets and rear wheel mounts • Steering knuckles and linkage, servo mounting plate and linkage • Wheel rims, TPU tire models, brake parts, brake discs and shock-absorber plates All STL filenames are in English. Quantity hints in the filenames follow the supplied source names; inspect each model in your slicer before choosing the number of copies. Choose the chassis variant that suits your build. This is a digital download, not an assembled vehicle. Electronics and non-printed hardware are not included. Assembly instructions, a hardware bill of materials and tested print settings were not supplied with this package. Check fit, clearances and component compatibility before printing or assembly. The cover is an AI-generated illustrative image and is not a photograph of a verified assembled build.

Technology
Sin probar
material
—
Difficulty
Sin especificar