RC & MecánicaGratis
RC Car Ramp
A ramp designed for use with RC cars. The author created this model because they could not find a similar ramp elsewhere.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
12 modelos etiquetados
#rc car
Descubre modelos 3D etiquetados como rc car y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
HerramientasGratis
RC car bumper
A bumper designed for an RC car.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
Hyper Go RC Car Shock Tower
A shock tower for a Hyper Go RC car. To install, unscrew the shocks and the arms; there are 4 screws required for dismantling.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
Hyper Go RC Car Control Arm
A control arm for a Hyper Go RC car. To install this part, the user must dismantle the differential box and pull off the arm. The author notes this was printed as a quick fix after breaking a control arm due to a motor upgrade.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
OrganizaciónGratis
HSW RC Car Wall Mount for Traxxas Rustler
A mount designed for the Traxxas Rustler to be used with the Honeycomb Storage Wall (HSW). This model is a remix of the JR_Craftworks Mount.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
RC Car Axle
An axle designed for an RC Mustang. The author notes that hole sizes can be adjusted if needed to fit specific vehicle types. The author suggests that a potential improvement or remix could include adding more support to the cylindrical pieces to prevent breakage during heavy use. The author reports that after 'torture testing' the axle by driving it over rocks, dirt, and water, it broke after approximately 40-60 minutes.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
RC car drive shaft
An RC car drive shaft.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
RC Car Steering Knuckle for 1:8 Adventure Force Baja Brute
RC car steering knuckle designed for "The Adventure Force Baja Brute (1:8) scale".
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
Rear wing and reinforced supports for Corally Kagama RC Car
Rear wing and reinforced supports designed for the Corally Kagama RC car. To attach the reinforced wing supports, 4x M3x20 screws are required. The author lists TPU as the filament used for greater flexibility.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
RC Car Body Shell Clip Spacers
Spacers designed to protect the body shell of RC cars. Files: clip.stl
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
OrganizaciónGratis
RC Car Wall Mount (65mm Wheel Max Diameter)
A simple and reliable wall mount for RC cars. While designed for the MJX 14211, it is compatible with any RC car featuring a wheel diameter of up to 65mm. The mount is intended to be secured to a wall using standard screws. Note: The model must be mirrored to produce a second mount.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaGratis
RC Car Shock Absorber for 1:10 Scale Buggies
A simple, friction-type shock absorber designed for 1:10 scale RC buggies, such as The Marmot. Assembly requires an M5 allen head bolt for the stem and a metal spring.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar