Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

39 tagged models · Page 1 of 1

#crawler

Discover 3D models tagged crawler and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Patín de techo para Hobby Plus CR18P Evo Pro

Roof skid for Hobby Plus CR18P Evo Pro

Skid designed to be placed on the roof of the Hobby Plus CR18P Evo Pro. It is a specific body accessory intended for the upper area of the crawler. The source does not detail the fastening method nor certify structural protection or rollover resistance; its nominal compatibility does not replace verification with the actual body. Preparation, compatibility, and printing Place the model on the roof and check supports, holes, and clearances before printing the final version. Pay attention to thin areas that could be damaged when removing supports. No material, layer, or infill are documented. Choose the finish and orientation according to the geometry, without altering the mounting points to fit them by pressure.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de herramientas de escala para plataforma de crawler RC

Scale toolbox for RC crawler platform

Purpose This model is a toolbox designed for use with a 1/10 scale RC crawler featuring a flatbed. The author notes it can be adapted for other scales, such as 1/18 scale, by scaling the model down to 50% in a slicer. Practical Uses The toolbox serves as a storage container for RC crawler accessories. Without the lid, the dimensions are 144mm long, 54mm wide, and 33mm tall; with the lid, the total height is 36mm. Included Parts - rc tool box with lid.stl - rc toolbox lid.stl - rc tool box .stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Caja de carga para Redcat Everest Gen7 a escala 1:10

Cargo box for Redcat Everest Gen7 1:10 scale

This model is a 1/10 scale RC crawler bed designed for the Redcat Everest Gen7. The author states these are extra flex beds created for use with a custom suspension kit they developed for the vehicle. Included files: - 110 crawler bed ultra flex w sides.stl - 10 crawler bed ultra flex w sides.stl - 10th crawler bed w sides.stl - 10th crawler bed extra flex.stl - 10th crawler bed.stl - 10 crawler bed mount R.stl - 10 crawler bed mount front.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Jaula y portaequipajes para caja de crawler RC

Cage and luggage rack for RC crawler box

This model is an RC crawler bed cage and roof rack designed for scale or competition crawlers. While the author specifically designed this for the SCX24, it can be scaled to any size using a slicer. Practical uses include adding a bed cage or roof rack modification to a crawler vehicle. Included parts: crawler bed cage.stl Printing guidance: Print this model with supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Soporte de batería sobre el eje delantero para crawler Hornet

Battery mount on the front axle for Hornet crawler

Mount to place the battery on the front axle of the competition-style Hornet crawler based on CyberBrick. The author indicates that it requires their modified axle, which they call the "wild axle" in the description. It should not be assumed compatible with the standard axle without comparing the parts. Changing the battery position modifies the weight distribution, but does not guarantee a performance improvement on every build. Preparation, compatibility, and printing First identify the axle associated with the design and check the mount's anchor points. Verify steering clearance, articulation, and cables throughout the full range of motion. The housing must hold the battery without compressing it. Battery dimensions, material, and print profile are not specified; those decisions require checking the actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hexágonos de rueda V2 para crawler Hornet CyberBrick

Wheel Hexagons V2 for Hornet CyberBrick crawler

Second version of the wheel hexagon adapters for the Hornet crawler based on CyberBrick. The author indicates that four M8 nuts are required for the assembly. The download contains the printed parts and does not include that hardware. Not all compatible axle or rim measurements are specified in the text. Preparation, compatibility, and printing Check the Hornet variant, the nut housing, and the rim fit before printing. Avoid deforming the housing when inserting the nuts and verify that the wheels rotate without rubbing. No material, layer, or infill are documented. After assembly, check retention, clearance, and concentricity before using the vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Ruedas grandes para crawler Hornet CyberBrick

Large wheels for Hornet CyberBrick crawler

Alternative wheels for the CyberBrick-based Hornet crawler, proposed by its author to use different tires. The source does not specify inner diameters, widths, or tire references. The title "large wheels" is descriptive and does not replace a measurement comparison. Preparation, compatibility, and printing Measure the tire seat, the axle, and the clearance from the suspension and bodywork. A larger wheel modifies the available space and may require other parts of the assembly. Maintain the original scale during checking and do not scale to adjust only one diameter without checking the rest. No material or print profile is documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Eje ancho para crawler Hornet compatible con motores N30

Wide axle for Hornet crawler compatible with N30 motors

This model is a wide axle designed for the Hornet, a competition-style CyberBrick crawler. According to the author, this component makes the vehicle compatible with larger N30 motors. Practical uses include upgrading the Hornet crawler to accommodate different motor sizes. Included files: - wide swingarm 2X.stl - the wide top part of the axle 2X.stl - the wide bottom part of the axle 2X.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Anclaje de tirantes para crawler Hornet CyberBrick

Suspension link mounts for Hornet CyberBrick crawler

Anchor pieces for the suspension rods of the Hornet crawler based on CyberBrick. The author refers to them as "STRONG," but the available documentation does not provide tests to quantify an improvement in strength. They are presented as a mounting variant, not as a certified reinforcement. Preparation, compatibility, and printing Identify the position of each piece and compare holes and supports with the chassis. Check that the ball joints or rods travel through their full angle without touching the anchors. Layer orientation must be studied based on the stresses of the assembly. No material or infill percentage is documented; first validate fit and movement in a static state.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Juego de tirantes elevados para crawler Hornet CyberBrick

High-clearance link set for Hornet CyberBrick crawler

These high clearance links are designed for The Hornet, a competition-style CyberBrick crawler. Practical uses include increasing ground clearance for the crawler during competition-style driving. Included files: - high clearance link back up left.stl - high clearance link back up right.stl - high clearance link front up left.stl - high clearance link front up right.stl - high clearance link front down2x.stl - high clearance link back down 2x.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Crawler Servo and 4S LiPo Mount

RC Crawler Servo and 4S LiPo Mount

RC Crawler servo/battery mount Purpose This mount is designed for RC crawlers to position the servo at the lowest possible height. It also features a dedicated compartment designed to hold a 4S LiPo battery snugly, which is intended to eliminate the need for a battery strap. Practical Uses This component is used in RC crawler builds to optimize center of gravity by lowering the servo position and to secure a 4S LiPo battery without external fasteners. Included Parts - Component1.stl - Component2.stl Printing Guidance Based on the author's settings using a Neptune 4 Pro: - Infill: 100% - Layer Height: 0.2mm - Speed: 120mm/s - Supports: Tree supports

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de MST Tire Inlays

MST Tire Inlays

MST Tire Inlays Purpose These models are designed specifically as tire inlays for MST 105mm x 30mm 1.9 tires. They are intended to provide internal structure or weight management within the tire assembly. Practical Uses There are two distinct versions available to accommodate different rim configurations: - Version One: Designed to fit with weights located around the rim. - Version Two: Designed for use with rims that do not have weights. Included Parts - INLAY Version One.stl - INLAY 53mm Version Two .stl Printing Guidance For optimal results, the following print settings are recommended: - Material: TPU95 - Infill: 8% - Walls: 2 - Layers: No Bottom or Top layers

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1/10 SR5 Toyota Pinched Body RC

1/10 SR5 Toyota Pinched Body RC

1/10 SR5 Toyota pinched body RC Purpose This model is a pinched Toyota body designed specifically for 1/10th scale RC vehicles. The design features a taller roof compared to standard versions. Practical Uses This body is intended for use with 1/10 scale RC crawlers and vehicles, such as those from Vanquish, SCX10, Axial, and Traxxas. Included Parts - sr5 bed.stl - sr5 grill 10.stl - sr5 hood 10.stl - sr5 cab 10th.stl - sr5 bed cover.stl - sr5 cab fixed.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de REEFS XPT3 Transmission

REEFS XPT3 Transmission

REEFS XPT3 Transmission 3D Model Purpose This 3D model of the REEFS XPT3 Transmission is designed to assist with RC crawler projects. It serves as a digital representation of the physical component to aid in planning and design. Practical Uses Users can print the model to perform fitment tests within an RC rig before purchasing the actual transmission. Additionally, the provided STEP file can be utilized to assist in various CAD design workflows. Included Parts - XPT3 Transmission.stl - XPT3 Transmission.step

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de INJORA LCG Transmission

INJORA LCG Transmission

This 3D model of the INJORA LCG Transmission is designed to assist with RC crawler projects. It serves as a digital reference for builders planning their vehicle layouts. Practical uses for this model include printing a physical version to test the fitment within a specific rig before purchasing the actual component. Additionally, the provided STEP file can be utilized to assist in various CAD design workflows. Included parts: - INJORA LCG Transmission (.step file) - INJORA LCG Transmission (.stl file)

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Expedition recovery pulley

RC Expedition recovery pulley

RC Expedition recovery pulley Purpose This model is an extraction pulley designed for use in recovery and rescue operations, specifically intended for RC applications such as crawlers and off-road vehicles. Practical Uses It serves as a simple pulley system for winch-based rescue scenarios during RC expeditions. Included Parts The model includes the following files: - Body.stl - Body (2).stl - Pulley.stl - Pulley.3mf - Hook.stl Printing and Assembly Guidance For printing, the author recommends using 100% infill and applying a brim. Assembly requires 2x M2x10 screws and 2x M2 nuts. The author recommends lightly gluing the screws to prevent them from loosening during use or becoming lost.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de SCX24 battery tray

SCX24 battery tray

This model is an SCX24 battery tray designed to lower the battery position within the vehicle. 1. Purpose: The primary function of this part is to reposition the battery lower in the chassis of the SCX24. 2. Practical Uses: It is intended for use in Axial SCX24 RC crawlers to modify the battery mounting height. 3. Included Parts: The download includes one file: Part Studio 1 - battery (1).stl. 4. Printing/Assembly Guidance: No specific printing or assembly instructions are provided in the source data.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1 Purpose This model is an axle servo mount designed specifically to fit the stock axles of the Vaterra Ascender. Practical Uses It is intended for use in RC crawler applications to secure a servo to the Vaterra Ascender axle assembly. Included Parts - Vaterra Ascender Axle Servo Mount.3mf Printing and Assembly Guidance To print this model, it should be laid face down with the use of supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Scale Car Battery

Scale Car Battery

This model is a scale car battery designed for use with RC crawlers. The author notes that the model can be scaled to any desired size to fit specific crawler builds or scale requirements. 120-300 words when facts suffice, otherwise be concise.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Venom Creeper Bumper Mount

RC Venom Creeper Bumper Mount

RC Venom Creeper Bumper Mount Purpose This model was created in FreeCAD to serve as an alternative bumper mount for the RC Venom Creeper. The author designed this part because the factory mounts appeared to be underbuilt. Practical Uses This part is intended for use on RC Venom Creeper crawlers as a replacement or upgrade for the stock bumper mounting hardware. Included Parts - Final venom creeper bumper mount-BodyPocket002.3mf Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Axial Wraith 2.2 Jeep Style Hood

Axial Wraith 2.2 Jeep Style Hood

Axial Wraith 2.2 Jeep Style Hood Purpose This model was designed by the author to provide an Axial Wraith 2.2 with the aesthetic appearance of a Jeep YJ. Practical Uses It is intended for use in RC crawling applications to customize the visual style of the vehicle to resemble a Jeep. Included Parts - jeep yj hood final.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1/7 Scale Gas Can with holder

1/7 Scale Gas Can with holder

1/7 Scale Gas Can with holder Purpose This model is a 1/7 scale accessory consisting of a gas can and a mounting holder. It is designed to add scale detail to RC crawlers. Practical Uses While designed to bolt onto the Rlaarlo JK07 using 2mm bolts, the author states it could work on any RC crawler. For the JK07 specifically, the author suggests using the bolts from the traction boards to install the holders, which allows the traction boards to be held on separately using black hair elastics. Included Parts - Gas Can Cap 130.stl - Gas Can 130.stl - Gas Can Holder 130.stl Printing and Assembly Guidance The gas can is composed of two parts, which allows the user to print the cover in a different color and glue it onto the main body. Installation on the Rlaarlo JK07 requires 2mm bolts.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Body WPL - C24/C14 Land Rover Series 2

RC Body WPL - C24/C14 Land Rover Series 2

RC KAROSERIE WPL - C24/C14 Land Rover Series 2 Purpose This model is an RC body designed for use with WPL chassis, specifically compatible with the C24 and C14 models. It is styled after the Land Rover Series 2. Practical Uses This model is intended for RC crawler enthusiasts looking to customize or replace the body of their WPL-based vehicles. Included Parts The digital download includes multiple STL files: - wpl c24 landrover (9).stl through (22).stl Printing and Assembly Guidance The author states that no blueprint is provided for the assembly of this model. Completion of the build may require user imagination.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de GAZ 69 SPECIAL WPL-C24, C14 body

GAZ 69 SPECIAL WPL-C24, C14 body

GAZ 69 SPECIAL WPL-C24, C14 body Purpose This model is an RC body designed for the GAZ 69 vehicle, specifically engineered for compatibility with WPL-C24 and C14 chassis platforms. Practical Uses It is intended for use in RC crawler applications, providing a custom body shell and various mounting components for WPL-series chassis. Included Parts The file set contains the following components: - wpl gaz69 (20).stl (Main body) - wpl gaz69 drzak karoserie.stl (Body holder) - wpl gaz69 drzak baterie.stl (Battery holder) - wpl gaz69 drzak zadni+vyztuhy.stl (Rear holder with reinforcements) - wpl gaz69 pricniky korby.stl (Crank handles/components) - wpl gaz69 slidery.stl (Sliders) - wpl gaz69 disky siroke.stl (Wide disks)

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de TRX4 custom ESC mount

TRX4 custom ESC mount

TRX4 custom ESC mount Purpose This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias. Practical Uses It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance. Included Parts - 1x ESC mount (ESC_mount.stl) Assembly Guidance To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1/10 scale RC tire

1/10 scale RC tire

This model serves as a placeholder tire designed for a 1/10 scale rock crawler. The author states it was modeled using a combination of different sources. Practical uses include serving as a component for a 1/10 scale RC truck. The design is intended for an 8mm hex hub featuring a 3mm center hole. The dimensions are described as a 14x10 rim with a 35x12 tire. Included files: - rc tire.stl - CFFFP_rc tire.gcode

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Steering Spacer for TRX4M

Steering Spacer for TRX4M

Steering Spacer for TRX4M Purpose This model is a steering spacer designed for use when installing a Reefs Micro 99 Servo paired with a Reefs Micro short horn on a TRX4M. Practical Uses It is intended to provide fitment between the steering horn and the steering link. The author specifically designed this to work with a TRX4M setup that utilizes a metal steering link, the Reefs Micro 99 servo, and the Reefs Micro horn. Included Parts - TRX4M Steering Space.stl Printing and Assembly Guidance The author reported successful use of PLA for this part, noting that it is holding well. However, the author suggests that stronger materials may provide better durability for this application.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Rock terrain tiles

Rock terrain tiles

rock terrain tyles Purpose These files are designed to create an indoor track for 1:24 scale RC crawlers. The model consists of terrain tiles featuring integrated rock elements. Practical Uses They are intended for use as indoor obstacle courses or driving surfaces for small-scale remote-controlled rock crawlers. Included Parts - rockwall.stl - stones.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 1/10th Scale Jack Stands

1/10th Scale Jack Stands

Purpose: These are simple, separated jack stands designed to be easily placed under different locations of an RC vehicle. The author designed them specifically for use with a TRX4. 1/10th Scale Jack Stands Practical Uses: They are intended for supporting RC vehicles, such as the Traxxas TRX4, during maintenance or storage. Included Parts: trx4 axle stand rev2.stl Printing/Assembly Guidance: The author reports printing these in PLA with 50% infill, though they note that the required infill may depend on the weight and modifications of the vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Body pin link

Body pin link

This model provides body clips designed to prevent the loss of body pins in RC vehicles such as crawlers and buggies. Practical uses include securing the body of an RC car to its chassis. Included files: - Clip-Flex.stl - Clip-Flex_0.4n_0.2mm_FLEX_MK4_11m.gcode The author reports printing this model using Flexfill 98A filament.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de SCX24 flex plates

SCX24 flex plates

scx24 flex plates Purpose These flex plates are designed to lower the SCX24 chassis closer to the ground. By reducing the height, the model improves the vehicle's center of gravity, which helps prevent rollovers while crawling or navigating steep obstacles. Practical Uses While demonstrated on a C10 model, these plates are compatible with any SCX24 model. They are intended to add flex to the chassis to enhance crawling performance. Included Parts - scx24 flex plates.v1.stl Printing and Assembly Guidance The designer suggests increasing the thickness of the parts within your slicer settings to achieve better performance. On a K1 printer, the print time is approximately one minute, allowing for quick installation and immediate use.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Axial SCX10 Shock Seals Replacement Spacers

Axial SCX10 Shock Seals Replacement Spacers

Axial SCX10 Shock Seals Purpose These replacement spacers are designed to address oil leakage issues in factory Axial SCX10 shocks. By replacing the original 1mm spacers with these 1.4mm versions, the additional thickness provides extra compression on the O-rings when the bottom cap is tightened, creating a tighter seal without affecting damping behavior. Practical Uses This modification is intended for RC crawler enthusiasts looking to prevent oil from escaping their SCX10 factory shocks. The increased thickness aims to provide a more reliable seal over long-term use. Included Parts - Shock Spacer AXI233002 replacement (.stl) - OpenSCAD source code (.scad) for tolerance adjustments Printing and Assembly Guidance For printing, the creator used a Prusa MK4 with a 0.4mm nozzle and PET-G material. It is recommended to use a 0.10mm layer height to ensure a smooth perimeter. Users should print a single test piece to verify that the outer diameter matches the original injection-molded spacers and that the thickness is exactly 1.40mm. The inner diameter can be slightly smaller as long as the shock shaft glides smoothly. To assemble, rebuild the shocks according to the manual, replacing the original spacers between the O-rings with these printed parts. Apply shock lubricant liberally around the O-rings. The bottom shock cap may feel slightly tighter than before due to the increased spacer thickness.

Technology
Sin probar
material
—
Difficulty
Sin especificar