Model information
Description
TRX4 custom ESC mount
Purpose
This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias.
Practical Uses
It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance.
Included Parts
- 1x ESC mount (ESC_mount.stl)
Assembly Guidance
To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.
Original text by the author on Printables
<p>This is an ESC mount designed to be bolted straight onto the inner fender of the TRX4. The hole spacing matches up with the XL-5's, so the ESC can mounted to the same place without messing up the weight bias.</p><p>You will need 2x M3x10mm countersunk screws to bolt the ESC mount onto the inner fender.</p><p>Hot glue or zip tie ESC onto the mounting plate.</p><p> </p><p>Interested in our RC crawler bodies and accessories? Feel free to visit ahead RC stores <a href="https://cults3d.com/en/users/ahead_RC/creations">here</a> and <a href="https://www.myminifactory.com/users/Ahead_RC">here</a>!</p><p>Be sure to check us out as we may upload free accessories from time to time!</p>
Questions and contributions