RC & MecánicaFree
TRX4 inner fender mount
TRX4 inner fender mount for those using aluminium front shock towers
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
MESHOPIAScale modelling & RC4 tagged models · Page 1 of 1
#trx4
Discover 3D models tagged trx4 and check their print information, files and terms before downloading.Search this tag in the catalogue →
RC & MecánicaFree
TRX4 custom ESC mount
TRX4 custom ESC mount Purpose This model is an ESC mount designed to be bolted directly onto the inner fender of a TRX4. The hole spacing is specifically engineered to match the XL-5, allowing the ESC to be mounted in the same location to maintain the vehicle's original weight bias. Practical Uses It serves as a mounting plate for an Electronic Speed Controller (ESC) within a TRX4 crawler, providing a secure location that does not interfere with the vehicle's balance. Included Parts - 1x ESC mount (ESC_mount.stl) Assembly Guidance To attach the mount to the inner fender, use 2x M3x10mm countersunk screws. Once the mount is secured, the ESC can be attached to the mounting plate using hot glue or zip ties.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaFree
1/10th Scale Jack Stands
Purpose: These are simple, separated jack stands designed to be easily placed under different locations of an RC vehicle. The author designed them specifically for use with a TRX4. 1/10th Scale Jack Stands Practical Uses: They are intended for supporting RC vehicles, such as the Traxxas TRX4, during maintenance or storage. Included Parts: trx4 axle stand rev2.stl Printing/Assembly Guidance: The author reports printing these in PLA with 50% infill, though they note that the required infill may depend on the weight and modifications of the vehicle.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
RC & MecánicaFree
Front body post replacement for TRX Defender with magnetic posts
Front body post replacement for TRX Defender with magnetic posts Purpose This model is a replacement front body post designed for the TRX Defender. It was created as an alternative for users who are unable to shorten the original factory body post. Practical Uses This part is used to adjust the height of the vehicle's body by providing a shorter mounting point than the stock component. Included Parts - TRX4 Defender front post short.stl Printing and Assembly Guidance This model is designed to work with magnetic posts.
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar