MESHOPIAScale modelling & RC10 tagged models · Page 1 of 1
This model is an RC crawler bed cage and roof rack designed for scale or competition crawlers. While the author specifically designed this for the SCX24, it can be scaled to any size using a slicer. Practical uses include adding a bed cage or roof rack modification to a crawler vehicle. Included parts: crawler bed cage.stl Printing guidance: Print this model with supports.
SCX 24 Rear Bumper Purpose This model is a rear offroad bumper designed specifically for the SCX24. It serves as a replacement or upgrade component for the vehicle's rear chassis area. Practical Uses Users can choose between two different configurations depending on their desired clearance and aesthetic: a standard version and a "higher up" version for increased elevation. Included Parts The model package includes two design options: - SCX24 Rear Bumper (3mf format) - Rear Bumper higher Up (step format) Printing and Assembly Guidance No specific printing parameters or assembly instructions are provided in the source text.
Sand ladders Purpose These 3D-printed sand ladders serve as scale accessories designed to enhance the realism and aesthetic of a 1/24 scale Axial SCX24 RC crawler. They are modeled to mimic the appearance of full-size recovery tracks used in off-road environments. Practical Uses These accessories add a rugged, off-road look to your RC rig. They are intended for use with 1/24 scale crawlers, such as the Axial SCX24, to simulate recovery gear used when tires become stuck in soft terrain like dunes. Included Parts - Sand ladders.stl Printing/Assembly Guidance Not provided.
This model is an SCX24 battery tray designed to lower the battery position within the vehicle. 1. Purpose: The primary function of this part is to reposition the battery lower in the chassis of the SCX24. 2. Practical Uses: It is intended for use in Axial SCX24 RC crawlers to modify the battery mounting height. 3. Included Parts: The download includes one file: Part Studio 1 - battery (1).stl. 4. Printing/Assembly Guidance: No specific printing or assembly instructions are provided in the source data.
This scale compressor is a simple accessory designed specifically for the SCX24. It serves as a scale detail part to enhance the realism of the RC vehicle. Practical uses for this model include adding scale realism to an SCX24 build, representing onboard air compression equipment. Included parts: - compressor - body - compressor - handle Printing and assembly guidance: The files are provided in .3mf and .stl formats for the body and handle components.
Basic Scx24 Trailer Purpose This model is a basic trailer designed specifically for the SCX24. The author created this design to provide a simplified alternative to complex trailer kits that require numerous bearings, bolts, nuts, and multiple files. Practical Uses This trailer serves as a lightweight accessory for the SCX24 platform. To attach the hitch to an SCX24 Deadbolt, the author recommends using an open frame hole located behind the rear shock tower. A paper clip or similar item is slid through this hole, and the hitch is then placed onto the middle of the paper clip. Included Parts The model consists of the following STL files: - Axel3.stl - Bed.stl - BedToCar.stl - AxelMountx2.stl - HitchForScx.stl - TrailerTire.stl Assembly Guidance Assembly requires glue and random screws. To facilitate the hitch attachment on the SCX24 Deadbolt, you may need a tool to make a hole in the plastic frame to allow the paper clip to pass through. Attribution: Author via source text.
SCX24 upgrade 180/320 motor Purpose This model is a motor conversion designed for the Axial SCX24. The upgrade aims to replace the original motor, which the author reports often burns out under long-term load, with a unit that provides higher speed and better performance in extreme conditions, such as mud. Practical Uses This conversion is intended for RC crawler enthusiasts looking to improve the drive unit's durability and power output during heavy-duty or high-load driving scenarios. Included Parts - HGD1_14t_Pinion.stl - aJprwKyApLG (4).stl - Kolo v převodovce Originál Axial.stl Printing and Assembly Guidance The author recommends printing the gears in PET-G, noting that it proved most effective during testing. While PLA was used initially, PET-G was found to be superior. The author also tested ASA but noted that the small gears deformed during the printing process because the ASA could not cool fast enough; therefore, PET-G is the recommended material.
Purpose This model is a simple hitch designed for the SCX24 Bronco. The author designed it specifically to be used with James Spadaro's SCX24 trailer. Practical Uses The hitch is intended for attaching trailers to an SCX24 Bronco RC vehicle. Included Parts - bronco hitch(1).stl Printing and Assembly Guidance The author recommends printing in PLA with 100% infill. To attach the component, the author drilled through the top of the hitch and the bumper, then bolted them together.
scx24 flex plates Purpose These flex plates are designed to lower the SCX24 chassis closer to the ground. By reducing the height, the model improves the vehicle's center of gravity, which helps prevent rollovers while crawling or navigating steep obstacles. Practical Uses While demonstrated on a C10 model, these plates are compatible with any SCX24 model. They are intended to add flex to the chassis to enhance crawling performance. Included Parts - scx24 flex plates.v1.stl Printing and Assembly Guidance The designer suggests increasing the thickness of the parts within your slicer settings to achieve better performance. On a K1 printer, the print time is approximately one minute, allowing for quick installation and immediate use.
The author states this back rack is meant for a SCX24 but can be sized up or down to fit 1/30, 1/18, 1/12, 1/10, and 1/6 with mounting holes.