RECOMMENDED PRINT PACKAGE
Use MESHOPIA_MX180_37_STL_corrected_v2_20261022.zip: 37 STL components, the English construction manual and repair notes. The two outer moving dock-lip leaves were retriangulated at 0.000001 mm tolerance to remove zero-area faces. Their bounding dimensions are unchanged, with relative volume change below 0.000001. The other 35 STL files are byte-for-byte unchanged. The manual image-stream encoding was corrected; all 34 pages render identically to the original. Individual source STL files remain for reference; do not print both sets as additional kits. Physical fit, printing and load testing remain pending.
Modular bolted STL set for 1:14 RC layouts: build a loading dock, adjustable platform or longer bridge from repeatable 180 mm sections. Set deck height from 50 to 150 mm in 5 mm steps with one of three telescopic cartridge ranges (S 50–65, M 65–95, L 95–150 mm). Add removable guardrails, approach ramps, a moving transition flap and a folding truck transfer lip. The roadway is 329.5 mm wide; the deployed lip has 290 mm clear passage. Check your own vehicle clearance and dimensions before printing.
The download includes 37 unique STL files in millimetres, an English construction and assembly manual, parts inventory, four example BOMs and a height/ramp selection table. Print repeated quantities according to the chosen layout. Editable Blender files and generator scripts are not included.
You supply the metal screws, nuts, washers, reinforcement rods, hinge pins and suitable baseboard fixings. PETG and a 0.4 mm nozzle are the starting reference; print the fit and calibration pieces first. Do not globally scale the files because this changes hardware interfaces. The files have digital mesh, clearance and assembly checks. Physical printing, fit, wear, stability and load testing are not complete. No carrying capacity is established; approximately 10 kg is a design target only, not a tested or guaranteed rating.
Digital files only. No physical kit, vehicle, hardware or printer included. Review the manual and test the unloaded mechanism before use.
- Tecnología
- Sin probar
- Material
- —
- Dificultad
- Sin especificar
