6 modelos etiquetados · Página 1 de 1

#1:14

Descubre modelos 3D etiquetados como 1:14 y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

Vehículos y transporte5,90 €

Volvo A40G / Vulpa4G Hood Upgrade — burnie222 Improved Grille | 3MF

A Volvo A40G / Vulpa4G 1:14 RC truck hood upgrade adapted from burnie222’s design. This version features an improved grille and Volvo badge. Credit: original design by burnie222, sourced from Cults; modified hood geometry and grille details. The download contains one 3MF file. Digital file only; no physical part or vehicle is included. Check scale, clearances and compatibility with your specific cab in the slicer before printing. Fit and print results have not been physically tested.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte9,90 €

MESHOPIA WORKBOX 14 — 1:14 RC Site Container with Opening Rear Doors | STL Kit

A 1:14 scale site container for an RC truck or construction diorama. WORKBOX14 has an open top and opening rear doors, with a modular print kit designed for small home printers. The ZIP contains the printable files and assembly details. Digital files only; no printed container or RC vehicle is included. Check dimensions and clearances in your slicer. The model has not been physically printed or assembled, so fit and print settings are not verified.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte11,90 €

1:14 RC Loader Tyre — Mesh 138.20 × 56.60 mm | STL

Blank-sidewall tyre geometry for an RC loader project. Digital files only; wheel, vehicle and printed parts are not included. MEASURED DIGITAL DIMENSIONS At the original source coordinates, the mesh envelope is approximately 138.200 × 138.199 × 56.596 mm (diameter axes × width, using the source millimetre convention). These are digital bounds, not physical measurements. The earlier 137 × 54.56 mm label remains in the original filename for traceability; it does not match the supplied mesh envelope. Neither file has been rescaled. Check the wheel interface and dimensions in your slicer before printing. FILES Original text STL and a smaller binary STL for the on-demand viewer. Both contain the same 450,318 triangles when represented as float32; no triangles were removed and no scaling was applied. DIGITAL REVIEW Both meshes have finite coordinates, closed surfaces and consistent winding. Physical fit, material behaviour, traction and print performance remain untested; no verified printer profile is supplied.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & Mecánica4,90 €

Vulpa 4G 1:14 — burnie222 Three-Color Lettered Side Panels

Two modified side-panel parts for the 1:14 Vulpa 4G articulated dump truck by burnie222. The files separate the panel body, lettering and letter background so you can assign three colors in a compatible multicolor slicer. Only the two upgrade parts are included; the complete truck is sold separately. Credit: original truck design by burnie222, sourced from Cults. These side panels were adapted for a three-color letter/background arrangement. Digital files only; no physical parts are included. Check the three color assignments, layer preview, scale and fit in your slicer. Compatibility and print performance have not been physically tested.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporte14,90 €

MESHOPIA MX180 — Modular RC Loading Dock & Bridge | 1:14

RECOMMENDED PRINT PACKAGE Use MESHOPIA_MX180_37_STL_corrected_v2_20261022.zip: 37 STL components, the English construction manual and repair notes. The two outer moving dock-lip leaves were retriangulated at 0.000001 mm tolerance to remove zero-area faces. Their bounding dimensions are unchanged, with relative volume change below 0.000001. The other 35 STL files are byte-for-byte unchanged. The manual image-stream encoding was corrected; all 34 pages render identically to the original. Individual source STL files remain for reference; do not print both sets as additional kits. Physical fit, printing and load testing remain pending. Modular bolted STL set for 1:14 RC layouts: build a loading dock, adjustable platform or longer bridge from repeatable 180 mm sections. Set deck height from 50 to 150 mm in 5 mm steps with one of three telescopic cartridge ranges (S 50–65, M 65–95, L 95–150 mm). Add removable guardrails, approach ramps, a moving transition flap and a folding truck transfer lip. The roadway is 329.5 mm wide; the deployed lip has 290 mm clear passage. Check your own vehicle clearance and dimensions before printing. The download includes 37 unique STL files in millimetres, an English construction and assembly manual, parts inventory, four example BOMs and a height/ramp selection table. Print repeated quantities according to the chosen layout. Editable Blender files and generator scripts are not included. You supply the metal screws, nuts, washers, reinforcement rods, hinge pins and suitable baseboard fixings. PETG and a 0.4 mm nozzle are the starting reference; print the fit and calibration pieces first. Do not globally scale the files because this changes hardware interfaces. The files have digital mesh, clearance and assembly checks. Physical printing, fit, wear, stability and load testing are not complete. No carrying capacity is established; approximately 10 kg is a design target only, not a tested or guaranteed rating. Digital files only. No physical kit, vehicle, hardware or printer included. Review the manual and test the unloaded mechanism before use.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & Mecánica30,00 €

1/14 Kitten DT6 Bulldozer

3D model description EDIT: 2023 14th december - Fixed a minor issue with the "Lower Chassis Front.stl" file. 2023 4th december - Added a STLfile for 3mm Rod Ends. You can use these for the Bladelinks if you cant find any online. 2023 28th october - Added files for a foldable ladder, exterior scale accessory for the dozer. download "Kitten DT6 Rear Ladder.zip" to get it. 2023 9th october - Added files to 3d print you own tracks. New trackpads, new drive sprocket, new idlewheels, new running gear. 2023 8th october - Added a spacerfile to be able to install bigger and stronger trackmotors, partnumber for the motors is 5840-555, 80 rpm. NOTE: This is my oldest model, and it does not represent my newest work. The build manual is not 100% complete, and there have been alot of updates on this model over time, so the files can be a bit hard to navigate through. Watch a review of the dozer here: https://youtu.be/WIYtHiZrdJw I have been working on this model for a very very long time, I present you a Fully working RC bulldozer, been tested for over a year before release. Low cost parts, simple and easy assembly. This thing pushes everything in its path. This model comes with many different parts for different setups. You can choose between the standard width dozer, and the wide LGP chassis. There are files for 5 different blades included as well as a variety of different details to choose from. Parts list included in the zip file, as well as a guide on how to assemble it. I have also made a complete build series on youtube. Watch the build-series here: https://www.youtube.com/playlist?list=PLdh4mhBIIM2KP-2ukHjnittOmo9w28NGp Or search for Burnie222rc on youtube, and click on "playlists". Model Files fits a 22x22 printbed. fully electric dozer, with unbreakable steel drivetrain. Runs on a 3S lipo battery. 2200mah. For the chains from the link in the partslist, you'll need approximately 1,5metres (1 set). I used 1mm steel plates to make the blade knife and skidplate underneath. List of Screws I have used. The list is not complete, and shows approximately what you need: ST = self tapping 2x6 ST 40pcs 3x6 ST 2pcs 3x8 ST 44pcs m3x16 4pcs m3x20 8pcs m3x25 2pcs m3x50 2pcs (to mount the blade links onto chassis) m4x10 8pcs (to mount trackmotors) m4x30 8pcs (to attach drivesprockets to motorcoupler) m5x30 10pcs (rollers underneath) m5x35 4pcs (big idle wheels) You also need M3 locknuts, M4 locknuts M3 threaded rods M4 threaded rods M5 threaded rods Again, this list is approximately what you need, the amount of pcs isnt 100% correct, but should give you an idea of what is needed. EDIT 03.25.22: Added a Onepiece Cabin STL, for those who wants it simple. EDIT 03.30.22: Added a Chain Conversion Kit, so you can now use the Rounded chain type on this dozer. (link to video on how to convert the dozer is in the zipfile) EDIT 04.05.22: Fixed an error with the "Chassis Top Fender Mount.stl" file, the holes didnt align with the driver side fender. They do now. 3D printing settings print the parts with 3 or 4 walls (outer layers) and atleast 1mm top and bottom thickness. minimum 15% infill.

Tecnología: FDM
Material: Sin material concreto
Dificultad: Fácil