Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

3 modelos etiquetados · Página 1 de 1

#servo horn

Descubre modelos 3D etiquetados como servo horn y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Servo Control Horn for RC Planes & Gliders

Servo Control Horn for RC Planes & Gliders

Servo Control Horn for RC planes & gliders Purpose This 3-piece servo control horn is designed as a functional alternative for RC planes and gliders, intended to provide a quick solution for users needing replacement parts. Practical Uses It is used in remote-controlled aircraft to facilitate servo control. The author suggests this model as a way to avoid waiting for commercial parts to arrive. Included Parts The model consists of the following files: - Clip (2x).stl - Horn.stl Printing/Assembly Guidance According to the author, this model can be printed in approximately four minutes on an Ender 3 printer. Attribution: sambuildsstuff

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Servo horn, control surface - glue in place

Servo horn, control surface - glue in place

Servo horn, control surface - glue in place Purpose This model is a servo horn designed to be glued directly to a control surface on an RC plane or boat. Practical Uses It serves as a mechanical link for remote-controlled vehicles. The author advises users to check the dimensions and adjust the scale to ensure compatibility with their specific application. Included Parts - servo-horn.stl - servo-horn_0.2mm_PLA_MINI_28m.gcode Printing and Assembly Guidance For printing, the author recommends using PETG or PLA. The optimal orientation for printing is on the side.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Universal RC Airplane Control Horn / Servo Surface Mount

Universal RC Airplane Control Horn / Servo Surface Mount

Purpose This model is a universal, lightweight control horn designed to serve as a mechanical link between servo pushrods and control surfaces, such as ailerons, elevators, or rudders. It is intended for use in RC model airplanes, scratch-built foam board flyers, and custom hobby robotics. Practical Uses The vertical arm features a stack of three precision adjustment holes to allow for fine-tuning of control throw geometry, mechanical advantage, and servo travel limits. The base includes dual anchoring tabs designed to be slotted and glued into foam or balsa control surfaces. Included Files - rc servo horn.3mf - rc servo horn stl.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar