MESHOPIAModelismo y radiocontrol40 modelos etiquetados · Página 1 de 1
Purpose This object is a wall hanger designed for the WLtoys 12428 RC car. Practical Uses It is intended to be used as a mounting solution to hang the vehicle on a wall. Included Parts - supportMuralWLToys.stl Note: The author states this object was created in Tinkercad.
Purpose This model is an RC car rear wing designed for an RC car challenge. The design draws inspiration from both standard automotive wings and Formula 1 aerodynamics. Practical Uses The assembly serves as a rear wing component for RC racing vehicles. The author notes the design is thick enough to accommodate M3 screws on the wing adapter and M4 screws on the bottom. Included Parts The digital files include: - Rear Wing v2.1 v4.stl - Wing holder v2.stl - Wing adapter.stl - Pre-sliced Gcode files for Prusa i3 MK3 S+ (PLA material) Printing and Assembly Guidance The author reported successful printing results using a Prusa i3 MK3 S+ printer. Assembly requires M3 screws for the wing adapter and M4 screws for the bottom mounting.
Arrma Grom Typhon Servo Arm Purpose This model is a replacement servo arm designed for the Arrma Typhon Grom. It was created as an alternative to purchasing an original part after the stock component broke. Practical Uses It is intended for use in RC steering systems to restore functionality to an Arrma Typhon Grom vehicle. Included Parts - Arrma Grom Servo Arm v3.stl Printing and Assembly Guidance The author used PLA for the print. Regarding assembly, the specified order is to place the arm on first, followed by a tiny spring, and then the screw. The author notes uncertainty regarding the long-term durability of the part.
Tamiya XV-02 Upgrade Direct Steering Purpose This model is an upgrade for the Tamiya XV-02 direct steering chassis. According to the author, the upgrade is designed to improve the turning radius and eliminate play within the steering system compared to the original setup. Practical Uses It is intended for use on Tamiya XV-02 RC chassis to enhance steering precision and maneuverability. Included Parts The digital files provided include: - Main board tamiya XV02 (new version for better service) - Main board tamiya XV02 - Battery guard old servo mount - Servo saver board tamiya XV02 - XT 60 holder - Steering arm tamiya XV02 (2 pieces) Printing and Assembly Guidance The author recommends using PETG or a stronger material for printing and specifically does not recommend using PLA. The author reports using PETG for this upgrade without problems. To complete the assembly, the following hardware is required: - 2 pieces of 30mm x 4.6mm M3 hex spacers - M3 nuts - M3 screws - M3 x 30mm screws (used to secure the handle to the bottom of the chassis near the main gear)
Q903 / Q905 18650 Battery Mod Purpose This modification is designed for the Hosim Q903 and Q905 RC cars. It allows users to upgrade from stock batteries to 2s (7.4V) 18650 Li-ion battery packs, providing increased capacity and greater flexibility. Practical Uses This mod is ideal for users seeking longer run times and easier battery swaps. The holder is designed to securely hold standard 18650 cells and fits the vehicle chassis with minimal changes required. Included Parts - Q905Battery_Holder.stl - Base.stl Printing and Assembly Guidance To assemble, use a couple of small self-tapping screws to secure the base to the holder. The hold downs for the elastic require a quick cut with a hobby knife during installation.
2026 Xray XB2 Stand Purpose This stand is designed to support the 2026 Xray XB2 offroad buggy, specifically sized for the standard stock aluminum chassis. It is intended for use in a race pit area or for display purposes. Practical Uses Designed for simplicity, the stand features edges and contours that match the bottom of the XB2, including the front skid and side supports. A lip around the perimeter and at the rear helps prevent the car from moving while you are working on it. Included Parts The model consists of 4 pieces designed to slide together for assembly without the need for fasteners. Printing and Assembly Guidance This version is designed for easy printing and assembly. The creator used PLA+ for the build, noting that the four pieces took approximately 15 hours to print on an MK4 printer. The provided files include STL and 3MF formats, as well as a STEP file for those requiring CAD modifications. While designed for the 2026 XB2C, the creator suggests it may also work for the 2026 XB2D or 2025 models. Attribution: Morborg
This model features the CR-V Honda logo, designed with dimensions of 190x70x3 mm. It serves as a decorative emblem representing the Honda CR-V branding. Practical uses for this model include automotive-themed decor, custom signage, or hobbyist projects related to Honda vehicles. The digital files included in this listing are: - V.stl - -.stl - R.stl - C.stl No specific printing or assembly guidance is provided in the source data.
This model is a small wing designed in Fusion. According to the author, the design is intended to be compatible with the gyro version as well.
Mini RC Auto Purpose This model is designed to be an easy-to-build remote-controlled vehicle. According to the author, it is intended to be a fun driving experience suitable for both indoor and outdoor use. Practical Uses This model is categorized for RC drifting and general driving activities in various environments. Included Parts The model files include the following components: - Chassis - Body (Karosserie 1 and Karosserie 2) - Motor (Motor 1 and Motor 2) - Motor holder (Motor halter) - Pinion gear (Ritzel Motor and Ritzel Achse) - Steering assembly (Lenkung, Lenkungs stanke, and Servo halter) - Wheels (Reifen and Felge) Printing and Assembly Guidance The source text indicates the model is easy to build, but no specific printing parameters or assembly instructions are provided.
Purpose This model is a wheel hex designed for use with the HBX 18858 RC car. Practical Uses The part serves as a wheel hex for RC vehicle applications. The creator notes that while the dimension may be 4mm rather than 5mm, it functions on the HBX 18858. Included Parts - hex (1).stl Printing/Assembly Guidance Printing with 100% infill is suggested. PETG is recommended, though the creator notes PLA works fine.
Purpose: These components were created as a solution for RC car body holders that the author could not find online. Practical uses: The parts are intended to serve as body holders for RC cars. Included parts: - rc-standoff.stl
Tamiya Neo Scorcher shock spacer Purpose The author designed these basic spacers to increase the stiffness of the shocks. This modification is intended to make the car sit higher, making it more suited for off-road runs. Practical Uses These spacers are used to adjust the suspension height and hardness on a Tamiya Neo Scorcher, specifically optimized for off-road driving conditions. Included Parts - tamiya neo scorcher shock spacers rear.stl - tamiya neo scorcher shock spacers front.stl
PRINTABLE MUSTANG gt350r Purpose This model was created to address the difficulty often associated with printing RC cars found online. The author designed this specific Mustang GT350R model to be more accessible for 3D printing enthusiasts. Practical Uses This model is intended for use in RC (remote control) applications, specifically categorized for RC car and drift hobbyists. Included Parts - Ford_GT350R.stl Printing/Assembly Guidance No specific printing parameters, assembly instructions, or material requirements are provided in the source text.
Tire Purpose This model is a replacement or custom tire designed for use with RC cars. Practical Uses It is intended for RC vehicle applications where a tire with specific dimensions is required for fitment. Included Parts - 1x Tire (tire.stl) Specifications - Inside diameter: 55mm - Outside diameter: 70mm
This 3D model is an unfinished prototype intended to serve as a conceptual basis for magnetic dampers for RC cars. Inspired by a concept from Fast & Furious 6, the model is provided primarily for editing and redesigning purposes rather than as a finished functional product. Practical Uses The model is intended to act as a starting point for creators to design and develop high-quality, strong magnetic shock absorbers, specifically for applications such as Traxxas RC cars. The author suggests using the file to iterate on the idea to create a more effective suspension system. Included Parts The model file includes a prototype magnetic suspension design (prototype_magnetic_suspension.stl). Printing and Assembly Guidance The design requires 2.5x8mm magnets. The author specifies that magnets must be placed in a repelling orientation to function. Note that the author describes the current state of the model as unfinished, lacking sufficient springiness for light RC cars, and containing significant filing errors.
Purpose: This is a modeler version of a 7.4v 1000mah RC battery holder. Practical uses: Designed for organizing or holding RC car batteries. Included parts: - Module_Rc_Car_battery_holder.stl - Module_Rc_Car_battery_holder_left_Rail.stl - Module_Rc_Car_battery_holder_Right_Rail.stl - Module_Rc_Car_battery_holder_Right__Left_Rail.3mf
Rc car body clip Purpose This model is a clip designed for use with an RC car body. Practical Uses It serves as a component to secure the body of an RC car in place. Included Parts - Rc car body clip.stl - CE3E3V2_body-clip.gcode Printing Guidance The author specifies printing with a layer height between 0.12mm and 0.20mm. No supports are required for this print.
ZD Racing Pirates 2 Gearbox Purpose This model is a replacement or upgrade gearbox designed specifically for the ZD Racing Pirates 2. Its primary function is to provide a 4:1 speed reduction. Practical Uses This component is intended for use in RC racing applications where a reduction in speed via a 4:1 ratio is required for the vehicle's drivetrain. Included Parts The model consists of the following files: - top.stl - g1.stl - g2.stl The author specifies that the assembly requires 4x bearings with dimensions 4x9x4. Printing and Assembly Guidance Assembly requires the integration of the provided STL files and the installation of four 4x9x4 bearings as noted by the author.
This model provides body clips designed to prevent the loss of body pins in RC vehicles such as crawlers and buggies. Practical uses include securing the body of an RC car to its chassis. Included files: - Clip-Flex.stl - Clip-Flex_0.4n_0.2mm_FLEX_MK4_11m.gcode The author reports printing this model using Flexfill 98A filament.
Purpose This jack stand and test stand is designed for the Monster GT and other RC cars or trucks. It is intended to hold the vehicle snug and firm off the ground for warming up and tuning purposes. Practical Uses The stand provides a stable platform to keep an RC vehicle elevated during maintenance or testing. Included Parts MGT STAND TOP (1).stl MGT STAND BASE.stl SPLIT-BASE PART 1.stl SPLIT-BASE PART 2.stl Printing/Assembly Guidance The base model does not include cutouts. The author suggests adding cutouts in Cura using 6 bottom layers to create screw pockets for holding small screws while working.
Purpose This suspension system is designed for RC models to adjust ride height and manage road surface roughness. Practical Uses It is used to improve the handling of RC vehicles when navigating irregular terrain. Included Parts - Suspension Up model.stl - Suspension Down Model.stl - Suspension spring.stl - Suspension All.stl Printing and Assembly Guidance Supports should only be applied from the base during printing. For assembly, insert M3 bolts into the mounting holes and compress the spring firmly to activate the mechanism. Once the bolts are removed, lubricate the stem with any lubricant and cycle the mechanism several times.
Lower A-arm for Helion Dominus 10tr Purpose This model is a replacement lower A-arm designed specifically for the Helion Dominus 10tr. The author developed this specific design as a solution following the failure of multiple other existing designs. Practical Uses This part is intended for use in RC car repairs or upgrades for the Helion Dominus 10tr, providing a replacement component for the suspension system. Included Parts - 10tr part v6.3mf - 10tr part v6.step Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.
A compact crossover with a sculpted hood, wide grille, roofline and rear hatch, side mirrors and detailed wheel geometry. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 2058816 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A large SUV with an elongated cabin, roof rails, sculpted front bumper, side mirrors and detailed wheels. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 1230295 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A four-door sports sedan with a low roofline, sculpted front fascia, side mirrors and multi-spoke wheel details. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 1266505 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A classic box-shaped sedan with round headlamp details, upright cabin, thin bumpers and wheel geometry. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 681898 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ADDITIONAL OBJ DOWNLOAD The original source OBJ version is also provided as a separate download named alfa-romeo-giulia-mk2-1962-geometry-001.obj. Its original geometry and numerical coordinates are preserved. It supplements the existing STL; it is an alternative digital representation and does not add physical hardware. Inspect dimensions, normals and mesh integrity before use. The MESHOPIA cover and CC0 authorization continue to apply. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A two-door coupe with a rounded roofline, wide grille, sculpted bumpers and wheel details. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 848320 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A fastback-style car with a sloping rear roofline, sculpted front fascia, side mirrors and detailed wheels. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 828440 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A compact sports coupe with a curved cabin, pronounced wheel arches, rear spoiler, grille details and wheels. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 1109140 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
An SUV with an upright cabin, split front grille, roof rails, sculpted body panels and wheel geometry. Supplied as one detailed STL vehicle mesh, including the body and wheel geometry visible in the cover. The file is suitable for inspection, digital display and further preparation for a scale-model project. PACKAGE CONTENTS One unique STL file, renamed in English. Repeated copies in the source folder are omitted. The original mesh and numerical coordinates are preserved; 1553831 triangles are recorded in the binary STL. No separate drivetrain, electronics, hardware or verified assembly instructions are included. PRINT PREPARATION Import the STL into your modelling software or slicer to check dimensions, units, thin surfaces, disconnected components and support requirements. Scale, watertightness and physical printability have not been independently validated. The vehicle shape does not establish a functional RC mechanism or moving wheels. Select material and printing settings after inspecting the mesh; no tested print profile is claimed. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.
A Speed Racer fan-art diorama kit with 19 STL meshes. It includes the three car-body sections, front and rear axles, tyre and wheel forms, seats, transmission, glass and mirrors, plus a figure split into head, torso, legs and two hands, a plate and a logo-bearing base. Repeat wheel and tyre copies and assembly positioning may be necessary. The kit is a static diorama; no working RC mechanism is supplied. COMPLETE SOURCE PACKAGE Geometry inventory: 19 STL. The ZIP preserves original native geometry bytes under English filenames. An included English file guide maps the files to their source part labels and documents duplicate aliases. Technical textures and documents are included where supplied. Internal native texture paths may require manual relinking. ON-DEMAND 3D INSPECTION 19 separate lightweight STL previews can be selected individually in the 3D viewer. Each is a normalized, approximate display conversion of its corresponding source, not a replacement for the full original. File identifier/source format mapping: 001: STL; 002: STL; 003: STL; 004: STL; 005: STL; 006: STL; 007: STL; 008: STL; 009: STL; 010: STL; 011: STL; 012: STL; 013: STL; 014: STL; 015: STL; 016: STL; 017: STL; 018: STL; 019: STL. PREPARATION AND USE Check original units, scale, assembly alignment, clearances, wall thickness, manifoldness, fabrication supports and component compatibility before use. Printing, mechanical function and assembly fit are untested. No included working RC electronics or verified printer profile is claimed. OWN MESHOPIA USE IMAGE An original locally generated AI-assisted photorealistic presentation is guided by inspected source geometry or supplied private assembly references, with a new finish, camera and usage setting. It illustrates the model or tools in use; it is not evidence of a manufactured object or a physical print. Additional scenery, tools, workshop equipment and installation hardware shown for context are not supplied. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.
Tesla Model S. A four-door electric fastback sedan with flush door handles, swept headlights, a smooth curved roofline and the early oval front nose panel. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Audi Allroad Estate. An estate vehicle with a long rear cargo roof, roof rails, wheel-arch cladding, vertical grille bars and detailed wheels. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 7 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 5 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Porsche 911 Coupe. A two-door rear-engine sports coupe with rounded headlights, a sloping rear roofline and detailed multi-spoke wheels. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Mercedes-Benz CLS Sedan. A four-door CLS sedan with a low curved roof, prominent front grille and detailed cabin and wheels. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Ford Mustang Coupe. A two-door Mustang coupe with a long sculpted bonnet, low front grille and fastback roof. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Ferrari F12 Berlinetta. An F12 Berlinetta sports coupe with a long bonnet, swept front lights, low roof and sculpted body panels. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Jaguar F-Type Coupe. An F-Type two-door coupe with a curved roof, swept headlights, low grille and detailed wheels. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Aston Martin Sports Coupe. An Aston Martin sports coupe with a long bonnet, low curved roof, swept headlights and detailed wheels. The exact trim and model year are not verified. Suitable for automotive visualization, scene building and further digital modelling. The English-named native package preserves 6 geometry files in FBX, OBJ, C4D, MAX formats, together with available material and texture companions and a filename mapping guide. Original native geometry bytes are preserved. Materials and textures may require relinking with the included mapping. 4 lightweight STL display conversions are available separately for on-demand viewing of the compatible FBX, OBJ and MAX source scenes. The display models use normalized units and simplified geometry where necessary; use native sources for editing and original dimensions. Cinema 4D scenes remain in the package without a verified browser conversion. The cover is a new AI-assisted MESHOPIA photorealistic illustration showing the vehicle in use, with a new finish, viewpoint and environment. It is illustrative and does not document a manufactured print. Printability, physical scale, mechanical fit and road or RC operation have not been tested. Published by MESHOPIA under CC0 with the collection owner’s authorization.
Classic Volkswagen Beetle. A detailed closed-roof car with a curved roof, rounded fenders, circular headlamp forms, separate bumpers, four wheels, cabin details and a roof luggage rack. No independently verified production year or manufacturing scale is asserted. SOURCE VARIANTS AND ON-DEMAND 3D VIEWS Includes 1 MAX, 1 OBJ and 1 FBX native geometry file. Three separately selectable source-derived STL display views use normalized units and approximate simplification for browser viewing. OBJ display orientation has been corrected; native source bytes are unchanged. These views do not establish fabrication dimensions. Use the full native sources for editing and dimensional reference. NATIVE SOURCE CONTENTS English-named ZIP with supplied native geometry, technical material and texture companions, and an English filename mapping guide. Original geometry bytes are preserved. Native software and renderer compatibility are untested; texture paths may need relinking using the mapping. Technical textures are package assets, not public gallery photos. PREPARATION AND USE Digital model only. Physical scale, printability, wall thickness, watertightness, part separation, fit, strength and mechanical or RC operation have not been tested. Inspect the source in appropriate modelling or slicing software before fabrication. No verified printer profile or working drivetrain is claimed. ORIGINAL MESHOPIA PRESENTATION The cover is a new AI-assisted photorealistic illustration generated locally in ComfyUI using our inspected render of the supplied geometry. It shows a scale-model hobby finishing scene with a new finish, photographic lighting and environment. It does not document a manufactured or tested prototype. Hands, brushes, paint jars, bench and background props are illustrative and are not included. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed authorization.