Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

10 modelos etiquetados · Página 1 de 1

#spacer

Descubre modelos 3D etiquetados como spacer y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Spool holder and spacers for Creality filament on Recreator 3D MK5

Spool holder and spacers for Creality filament on Recreator 3D MK5

This model is a spool holder designed to allow the use of Creality filament on the Recreator 3D MK5. The author suggests that drilling holes into the center of the spool may be necessary for use. Practical uses include repurposing Creality filament spools for the Recreator 3D printer. The design utilizes a tensioner mechanism that slides the filament off the spool. Included files: - spool holder.stl - spacer upd x2.stl Printing and assembly guidance: The author instructs to print two spacers, as the tensioner is designed to slide the filament off the spool.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de CR Touch endstop mount

CR Touch endstop mount

Cr Touch endstop mount Purpose This model is a simple endstop mount designed for use with a CR Touch. It is also capable of functioning as a spacer. Practical Uses It serves as a mounting bracket for endstop components and can be utilized as a spacer in various configurations. The model is designed to be resized as needed to fit specific requirements. Included Parts - cr_touch_endstop.stl Printing and Assembly Guidance The author recommends printing this model using PETG material with 100% infill. Users should resize the model as needed for their specific application.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 3RACING Sakura D6 & 3RACING Cero Ultra wishbone spacer

3RACING Sakura D6 & 3RACING Cero Ultra wishbone spacer

3RACING Sakura D6 & 3RACING Cero Ultra wishbone spacer Purpose These spacers are designed to serve as replacements for the original wishbone spacers provided by 3RACING. According to the author, these components offer a better fit than the original parts, which were noted to be too large. Practical Uses They are intended for use in RC applications specifically for the 3RACING Sakura D6 and 3RACING Cero Ultra models to improve the fitment of the wishbone assembly. Included Parts - 3racing sakura d6 wishbone spacer.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Creality CR-200B Filament Sensor Spacer BMG

Creality CR-200B Filament Sensor Spacer BMG

Creality CR-200B Filament Sensor Spacer BMG Purpose This model is a spacer designed to facilitate the mounting of a filament sensor on a machine equipped with a BMG extruder. Practical Uses It is used specifically when upgrading or configuring a Creality CR-200B with a BMG extruder to ensure the filament sensor can be properly positioned. Included Parts - CR-200B_filament_sensor_spacer_BMG.stl Printing and Assembly Guidance The author suggests using PETG for fabrication, though PLA, ABS, and other materials are noted as compatible options. The recommended print setting is 15% infill. The author also includes the note, "Imprime con moderación."

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de CR10 MAX CR touch bracket spacer

CR10 MAX CR touch bracket spacer

This model is a spacer designed to facilitate the installation of a CR Touch sensor when upgrading from a BL Touch sensor on a CR10 MAX. Because the CR Touch sensor is taller than the original BL Touch, this spacer allows for compatibility when the original bracket is flipped upside down, avoiding the need for a completely new bracket. Practical uses include upgrading existing CR10 MAX hardware from BL Touch to CR Touch sensors. Included parts: - cr 10 max bracket.stl Printing and assembly guidance: Printing time is approximately 20 minutes. The author recommends printing this part out of PETG due to its proximity to the hot end. To install, the original bracket must be flipped upside down and this spacer added to accommodate the height of the CR Touch sensor.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Customisable Height RC Shock Spacer - 12mm ID

Customisable Height RC Shock Spacer - 12mm ID

Customisable Height RC Shock Spacer - 12mm ID Purpose This model is a shock spacer designed for 1/10 scale RC touring car suspension preload adjustments. Practical Uses It is used to manage suspension preload. While the default height is 2mm, the model is scalable in the Z axis, allowing users to adjust the height to suit individual tuning needs. Included Parts - ShockSpacer2mm.stl Printing and Assembly Guidance The part features rounded edges that are optimized for printing with a 0.4mm nozzle.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC 7mm wide spacer for M3 screw

RC 7mm wide spacer for M3 screw

Purpose This 7mm wide spacer is designed for use with M3 screws. While intended for RC cars, the author notes it can be used for other applications. Practical Uses The spacer is described as being suitable for offsetting shocks from a chassis. Included Parts - 7mm spacer for M3 screw (1).stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Traxxas Sledge battery spacer

Traxxas Sledge battery spacer

Traxxas Sledge Battery Spacer Purpose This model is a replacement part designed to substitute for a lost battery spacer foam block in a Traxxas Sledge. Practical Uses It serves as a spacer within the RC truck to secure the battery in place, mimicking the function of the original foam component. Included Parts - traxxas sledge battery spacer-Body.stl Printing and Assembly Guidance The author suggests printing this part using TPU material. To achieve a level of compression or "squish" similar to the stock foam part, it is recommended to use 30% infill with seams.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Ender 3 V3 SE CR Touch Spacer for KE/K1 Hotend

Ender 3 V3 SE CR Touch Spacer for KE/K1 Hotend

Purpose This spacer allows a CR Touch to be used with a V3 KE/K1 hotend when installed in a V3 SE printer. The design is based on the Volcano bracket by T3KPrinter. Practical Uses It serves as an adapter to accommodate the specific geometry of the KE/K1 hotend within the V3 SE setup. Included Parts V3SE-CRTouchSpacer.stl Assembly Guidance Installation requires two longer M3 screws because the original screws will not reach through the spacer. The author used 12mm screws, though 10mm screws may also work.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Circular Ring, Spacer and Hook — Printable Parts Set

Circular Ring, Spacer and Hook — Printable Parts Set

Three distinct STL parts: a thin circular ring with small mounting holes, a thick circular spacer with a central opening, and an open hook-shaped bracket with a mounting hole. The archive repeats this set in two folders; exact copies are supplied once. No assembly diagram or demonstrated vehicle connection is included, so the set is presented as separate model-making parts. PACKAGE CONTENTS 3 unique STL files, renamed in English. Original geometry is preserved. No physical accessories are supplied. PRINTING AND USE No printer settings or build test are verified. Inspect the mesh and select orientation, supports, material and size for the intended miniature. Assembly compatibility has not been independently tested. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The cover is an original visualization generated locally from the supplied geometry; background tools are not included.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar