Información del modelo
Descripción
Purpose
This model is designed as a temporary replacement for ERevo arms to allow for field repairs after a crash. The author notes these are weaker than stock parts.
Practical Uses
These arms are intended to be swapped in quickly to keep driving, though the author advises driving more carefully due to their reduced strength.
Included Parts
- E Revo 2.0 Upper Back Arm v5.stl
- E Revo 2.0 Upper Back Arm v5.step
Printing Guidance
The model includes intentional gaps to address layer delamination during attachment. If the slicer is configured correctly, the printer will fill these areas with perimeters to increase strength.
Texto original del autor en Printables
<p>I was getting tired of dragghing my ERevo back home after these arms break, and in my experience these are the weakest parts of this car. So I modeled a temporary replacement, so that I could swap a broken arm in field and keep on driving (more carefully, though, since these are certainly weaker than stock). </p><p>To address the layer delamination when attaching the arm, the model intentionally has some gaps. If your slicer is configured correctly, the printer will fill those areas with perimeters, making them stronger.</p>
Preguntas y aportaciones