Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

8 modelos etiquetados · Página 1 de 1

#suspensión

Descubre modelos 3D etiquetados como suspensión y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Anclaje de tirantes para crawler Hornet CyberBrick

Anclaje de tirantes para crawler Hornet CyberBrick

Piezas de anclaje de los tirantes de suspensión del crawler Hornet basado en CyberBrick. El autor las denomina «STRONG», pero la documentación disponible no aporta ensayos que permitan cuantificar una mejora de resistencia. Se presentan como una variante de montaje, no como un refuerzo certificado. Preparación, compatibilidad e impresión Identifica la posición de cada pieza y compara taladros y apoyos con el chasis. Revisa que las rótulas o tirantes recorran su ángulo completo sin tocar los anclajes. La orientación de capas debe estudiarse en función de los esfuerzos del montaje. No hay un material ni un porcentaje de relleno documentados; valida primero encaje y movimiento en estático.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Juego de tirantes elevados para crawler Hornet CyberBrick

Juego de tirantes elevados para crawler Hornet CyberBrick

These high clearance links are designed for The Hornet, a competition-style CyberBrick crawler. Practical uses include increasing ground clearance for the crawler during competition-style driving. Included files: - high clearance link back up left.stl - high clearance link back up right.stl - high clearance link front up left.stl - high clearance link front up right.stl - high clearance link front down2x.stl - high clearance link back down 2x.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR - Suspension Spring Holder

Purpose This model serves as a replacement for the original bottom spring holder located in the suspension of the ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR. Practical Uses It is intended to replace worn or damaged suspension components on the specified ABSIMA truck model. Included Parts - Stossdaempfer-Teller-Dämperteller.stl Printing/Assembly Guidance The author suggests printing this part in PETG for increased durability. Using supports on the build plate was noted to work best.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks

MJX HYPER GO RC model steering arm and suspensions hooks Purpose These hooks are designed specifically as replacement parts for the MJX HYPER GO RX RC car. Practical Uses They serve as replacement steering arm and suspension hooks for the MJX HYPER GO model. Included Parts - MJX HYPER GO steering arm hook - MJX HYPER GO suspension hook Printing and Assembly Guidance The author recommends printing the hooks in a horizontal orientation for best results. Based on the author's reported settings using eSun PETG-CF filament, the following parameters were used: - Infill: 100% with concentric patterns - Speed: 50mm/s constant speed for all printing fields - Temperature: 255°C nozzle / 70°C bed Users may refer to the provided QiDi studio setting screenshots for additional configuration details.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer Purpose The author designed these basic spacers to increase the stiffness of the shocks. This modification is intended to make the car sit higher, making it more suited for off-road runs. Practical Uses These spacers are used to adjust the suspension height and hardness on a Tamiya Neo Scorcher, specifically optimized for off-road driving conditions. Included Parts - tamiya neo scorcher shock spacers rear.stl - tamiya neo scorcher shock spacers front.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de TAMIYA CR-01 Suspension mount

TAMIYA CR-01 Suspension mount

RC:TAMIYA CR-01 Suspension mount Purpose This model is a suspension mount designed for use with the TAMIYA CR-01 RC crawler. Practical Uses It serves as a component for the vehicle's suspension system. Users should note that dimensions may vary slightly depending on the printing temperature used, and post-print processing may be necessary for a proper fit. Included Parts - RC TAMIYA CR01_COIL_BK.stl Printing and Assembly Guidance For optimal results, the following print settings are recommended: - Layer height: 0.12mm - Infill density: 50% - Support: Required - Build plate adhesion: Raft recommended

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Suspension for RC models

Suspension for RC models

Purpose This suspension system is designed for RC models to adjust ride height and manage road surface roughness. Practical Uses It is used to improve the handling of RC vehicles when navigating irregular terrain. Included Parts - Suspension Up model.stl - Suspension Down Model.stl - Suspension spring.stl - Suspension All.stl Printing and Assembly Guidance Supports should only be applied from the base during printing. For assembly, insert M3 bolts into the mounting holes and compress the spring firmly to activate the mechanism. Once the bolts are removed, lubricate the stem with any lubricant and cycle the mechanism several times.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar