32 modelos etiquetados · Página 1 de 1

#rc airplane

Descubre modelos 3D etiquetados como rc airplane y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

OrganizaciónGratis

RC Airplane Wall Hanger (AIRHANG)

The AIRHANG system is a wall support designed for RC airplanes. Its primary purpose is to keep aircraft safe by storing them off the ground and away from workbenches. According to the source, the system is capable of holding all sizes and weights of RC planes securely to a wall. 1. Practical Uses: This system serves as a wall-mounted storage solution for hobbyists to organize and protect their RC airplane collections. 2. Included Parts: The provided files include AIRHANG2.stl, SLOPE PEG v1.stl, CESSNA SR22T.stl, CONSCENDO.stl, DECATHALON.stl, EC 1500 AIRHANG RIGHT.stl, and CESSNA SR22T AIRHANG RIGHT.stl.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

"ACTUALLY WORKS" propeller saver prop adapter for small RC airplane "reinforced"

This model is a reinforced propeller saver adapter designed for small RC airplanes. The creator developed this specific design to address functional failures found in other available models, noting that they have used this version many times in practice. **Purpose** The purpose of this model is to serve as a reliable propeller saver, protecting the propeller and motor shaft during landings or impacts. **Practical Uses** It is intended for use on small-scale RC aircraft to prevent propeller damage. **Included Parts** * propsaver adaptor.stl **Printing Guidance** The author recommends printing this model with PLA or PLA+ for optimal performance.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Drop Mechanism

RC Drop Mechanism Purpose This model is an RC drop mechanism designed for use with RC airplanes, drones, or other similar remote-controlled applications. It provides a method for releasing objects during flight. Practical Uses Users can utilize the central loop to attach a string or rubber band. This loop is intended to be wrapped around an object, which is then held in place by a wire connected to a servo motor. Included Parts - Remote Control Drop Mechanism.stl Printing and Assembly Guidance The author notes that some slight modifications might be required to ensure the mechanism fits a specific servo. Assembly involves connecting a wire from the servo to the mechanism to facilitate the release of the attached object.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC airplane landing gear (front and rear) model

This model consists of front and rear landing gear designed for an RC airplane. The author describes the components as being lightweight, strong, and capable of spinning perfectly. 1. Purpose: The model provides a landing gear solution for RC aircraft builds. 2. Practical Uses: It is intended for use as the front and rear landing gear on a remote-controlled airplane. 3. Included Parts: The download includes two files: 'front landing gear.stl' and 'Rear landing gear.stl'. 4. Assembly Guidance: The author notes that there is a 2mm hole present in the design.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Firewall (Flite Test Swappables)

RC Firewall (Flite Test Swappables) is a component designed for use with Flite Test swappable aircraft systems. Its primary purpose is to serve as a firewall for these specific planes. 1. Purpose: To provide a mounting structure for RC aircraft within the Flite Test swappable ecosystem. 2. Practical Uses: This part is used to secure a motor mount to the airframe. The author has integrated specific screw holes into the design to facilitate motor mounting. 3. Included Parts: The model includes one file: RC Firewall.stl. 4. Printing and Assembly Guidance: The author provides the following instructions: Print, glue, and fly.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

RC Aircraft Detail Set – Antennas & Scale Parts

RC Aircraft Detail Set – Antennas & Scale Parts Purpose This collection consists of small antennas and detail parts designed to improve realism in RC aircraft and scale models. The parts are inspired by real aircraft components to provide lightweight, simple additions for various builds. Practical Uses These components are intended for use in RC airplanes, scale aircraft models, dioramas, and custom builds. The parts can be scaled depending on the specific model size being worked on. Included Parts The set includes multiple antenna shapes and mounting elements: - Loop antennas - Whip antennas - Blade antennas - Pitot-style elements - Small mounting bases Printing and Assembly Guidance For best results, the author suggests using fine layer settings to capture detail. Recommended printing settings: - Material: PLA recommended - Layer height: 0.12–0.2 mm - Infill: 100% (for small parts) - Supports: No (depending on orientation) Note: Due to their size, these small parts may require careful handling during and after printing.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

AVEX-2 1120mm - 3D Printed RC Airplane

AVEX-2 1120mm - 3D Printed RC Airplane Purpose This model is a 3D printed remote-controlled airplane designed with a NACA 2410 airfoil profile. It is intended to achieve a target All-Up Weight (AUW) of approximately 1200g (+100g). Practical Uses This model is designed for RC flight using a single motor configuration. It is compatible with 2807 to 2812 brushless motors. Included Parts and Hardware The model features a wingspan of 1120 mm, a length of 680 mm, and a wing area of 21.56 dm². Required hardware and reinforcement include: - 1x Main Wing Spar (6mm x 900mm rod) - 1x Secondary Wing Spar (6mm x 300mm rod or BBQ skewer stick) - 2x Elevon Control Rods (3mm x 300mm rods or BBQ skewer sticks) - 2x 9g Micro servos - Brushless motor (2807 to 2812 size) Printing and Assembly Guidance The author recommends using PETG filament. The estimated print weight is between 600g and 700g. Recommended print settings are: - Layer Height: 0.28 mm - Wall Loops: 1 - Top Shell Layers: 3 - Bottom Shell Layers: 2 - Sparse Infill Density: 3–4% - Sparse Infill Pattern: Cubic

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Bottom hatch for FT Simple Scout XL

This model is a bottom access hatch designed specifically for the FT Simple Scout XL RC airplane. It serves as a removable door to provide access to the internal components of the aircraft through the bottom of the fuselage. This design is a remix of the original model found at https://www.thingiverse.com/thing:4739776. Included Parts: - ft simple scout xl bottom access door.stl - Frame_1.STL Note: This listing does not provide specific printing parameters, material recommendations, or assembly instructions. Users should refer to the original source or their own flight hardware requirements for compatibility and installation guidance.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Spinner cover for RC airplane

This model is a spinner cover designed for use with an RC airplane. The author created this design using Onshape. Purpose The purpose of this model is to serve as a cover for an RC airplane spinner. Practical Uses It is intended for application on RC aircraft models requiring a spinner cover. Included Parts The model consists of a single file: spiner_cover.stl. Technical Specifications The author reports an inside diameter of 75.000 mm. Printing and Assembly Guidance The author notes that they have not yet attempted to print this model.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Flying wing (highly experimental)

Purpose This is an experimental flying wing model designed for flight testing. The author notes that flight characteristics are currently unknown. Practical Uses The model is intended for use as a small-scale flying wing. The author suggests scaling the model up if you intend to use it for specific projects. Included Parts - flying-wing 3.0-v1.stl Printing and Assembly Guidance The model does not include slots for electronics. The author has included supports on the bottom of the hull. The base dimensions are 95.25 mm x 97 mm with a height of 107 mm.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Whistling bomb!!! with dropping system

Whistling bomb!!! Purpose This model is a remix of JeremyBoswell's Whistling Bomb, featuring longer tail fins. It is designed to function as a dropping system for RC aircraft, allowing for controlled deployment of a whistling projectile. Practical Uses When used with an RC plane, the user can trigger the release by manipulating the turning joystick to slide a component off the stick. This causes the projectile to fall to the ground while producing a loud whistling sound. Note that users should avoid blocking sensors with tape or the rocket itself, as this may cause the drone to incorrectly detect that it has already landed. Included Parts - Remix of JeremyBoswell's Whistling Bomb but longer tail fins.stl - Remix of JeremyBoswell's Whistling Bomb but longer tail fins.gcode Assembly Guidance To facilitate the dropping mechanism, a small, long needle (preferably plastic, such as a Kerplunk game piece) must be fitted into the tail fin at the back of the print. For optimal flight effects, it is recommended to add weight specifically to the front 1/3 of the missile. Modelling Credit: Josh P!

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Razorblade — 3D Printable RC Delta Jet

A swept delta-wing RC sport aircraft with twin vertical fins and a streamlined cockpit. Its multipart printable airframe includes the wing and fuselage sections plus supporting components. PACKAGE CONTENTS 45 STL files, 1 DXF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Cessna 152 — 3D Printable RC Aircraft

A light-aircraft-style RC trainer with a high-mounted wing, cabin fuselage and conventional tail. Separate printed airframe sections and supporting parts allow a multipart assembly. PACKAGE CONTENTS 3 PDF files, 37 GCODE files, 33 FACTORY files, 4 INI files, 4 SLICE files, 50 STL files in the original complete package. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. ADDITIONAL NATIVE PROFILES The separate cessna-152-native-profile-additions.zip contains four additional Simplify3D FACTORY source files: landing-gear spring, landing-gear pins, left wing strut and right wing strut. They retain the supplied bytes under English filenames and include an English source-file map. These profiles supplement the original ZIP and require software, printer and material compatibility checks before use. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 10 unique native geometry files in FACTORY format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 10 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

ICON V3 — 3D Printable RC Amphibious Aircraft

A compact amphibian-style RC aircraft with a raised wing, streamlined cockpit and an elevated rear propulsion arrangement, supplied as a multipart printable assembly. PACKAGE CONTENTS 33 STL files, 1 PDF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Kraga Kodo — 3D Printable RC Slope Glider

A slender RC glider with long wings and visible lightweight lattice structures. The printable parts form a multipart airframe whose external finish depends on the assembly and covering process. PACKAGE CONTENTS 1 PDF file, 66 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

F-86 Sabre — 3D Printable RC Jet

A Sabre-inspired RC jet airframe with swept wings, a rounded forward intake and a single vertical tail. Printed fuselage and wing components are supplied separately. PACKAGE CONTENTS 1 PDF file, 52 GCODE files, 50 FACTORY files, 93 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Junkers Ju 87 Stuka — 3D Printable RC Aircraft

A Stuka-inspired aircraft with a distinctive bent wing and propeller-driven layout. This smaller package contains eleven STL files; inspect their coverage before treating it as a complete airframe. PACKAGE CONTENTS 11 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Messerschmitt BF 109 — 3D Printable RC Aircraft

A BF 109-inspired RC warbird with a narrow fuselage, low wing, enclosed cockpit and conventional tail. Printable sections and supplied preparation files support a multipart build. PACKAGE CONTENTS 2 PDF files, 8 GCODE files, 8 FACTORY files, 35 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL BF 109H LANDING-GEAR CONVERSION PARTS A separate ZIP adds five newly recovered STL meshes: left and right inner wing sections prepared for landing gear, main and tail landing-gear patterns, and a conversion rudder. These source files belong to the me109_H_LG_conversion folder. They are additional conversion parts, not another complete airframe. Every added filename is in English and an English guide maps each part to its source label. Original STL bytes and coordinates are preserved; binary triangle counts were checked. Confirm dimensions, variant compatibility, assembly fit, hardware requirements and print preparation before use. The conversion has not been physically built or flight tested by MESHOPIA. The original aircraft package and watermarked cover remain available. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 2 unique native geometry files in FACTORY format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 2 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Messerschmitt BF 109T — 3D Printable RC Aircraft

A BF 109T-inspired RC warbird variant with a low-wing, single-propeller layout. Its files are distinct from the accompanying standard BF 109 package. PACKAGE CONTENTS 2 PDF files, 6 GCODE files, 6 FACTORY files, 31 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

P-47 N-15 Thunderbolt — 3D Printable RC Aircraft

A P-47-inspired single-propeller RC aircraft with a broad fuselage and low-wing layout. The package includes multipart airframe geometry and machine-specific preparation files. PACKAGE CONTENTS 2 PDF files, 13 GCODE files, 13 FACTORY files, 40 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

P-38 Lightning — 3D Printable RC Aircraft

A P-38-inspired RC airframe with two engine nacelles, twin tail booms and a central cockpit pod. Its distinctive structure is supplied as separate printable components. PACKAGE CONTENTS 2 PDF files, 12 GCODE files, 12 FACTORY files, 3 INI files, 3 SLICE files, 54 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

MiG-15 — 3D Printable RC Jet

A MiG-15-inspired RC jet with a prominent nose intake, swept wings and a single vertical fin. Printable sections and preparation files are included. PACKAGE CONTENTS 2 PDF files, 4 INI files, 4 SLICE files, 31 FACTORY files, 38 GCODE files, 56 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

P-51D Mustang — 3D Printable RC Aircraft

A P-51D-inspired RC warbird with a streamlined nose, low wings and bubble-canopy profile. Printable components are supplied for assembly. PACKAGE CONTENTS 2 PDF files, 6 GCODE files, 6 FACTORY files, 4 INI files, 4 SLICE files, 34 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL P-51D ACCESSORIES A supplemental ZIP contains six original source-labelled 3DLabPrint P-51D accessory STL designs: separate left and right exhausts, left and right wheel covers, a steering servo mount and a steerable tail mount. All files have new English names and a source-label guide; original STL bytes are unchanged. The source combined-exhaust STL was truncated and has been excluded; both valid individual exhaust files are provided. Check fit and print preparation before use; these accessories have not been physically tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Kraga Maripi — 3D Printable RC Aircraft

An RC sport aircraft with a conventional wing and tail layout and visible lightweight lattice construction. Parts are supplied individually for printing and assembly. PACKAGE CONTENTS 1 PDF file, 68 STL files, 3 STEP files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Savage V5 — 3D Printable RC Bush Aircraft

A bush-plane-style RC aircraft with a high wing, visible supporting struts and large-wheel landing-gear presentation. The airframe is supplied as separate printable parts. PACKAGE CONTENTS 36 STL files, 1 PDF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Qtrainer — 3D Printable RC Trainer Aircraft

A compact propeller-driven trainer-style RC aircraft with a conventional tail and separate printable airframe sections. PACKAGE CONTENTS 2 PDF files, 34 GCODE files, 34 FACTORY files, 4 INI files, 4 SLICE files, 59 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

EasyMax 001 — 3D Printable RC Sailplane

An electric sailplane-style RC airframe with a long-span wing and slender fuselage, supplied as individual printable sections. PACKAGE CONTENTS 3 PDF files, 4 GCODE files, 4 FACTORY files, 3 INI files, 3 SLICE files, 34 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Stearman PT-17 Kaydet — 3D Printable RC Biplane

A Stearman-inspired RC biplane with stacked wings, interplane struts and a radial-engine-style nose. Its multipart printable geometry supports assembly of the airframe. PACKAGE CONTENTS 2 PDF files, 35 FACTORY files, 4 INI files, 4 SLICE files, 35 GCODE files, 67 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Zivko Edge Hannes Arch — 3D Printable RC Aerobatic Aircraft

An Edge-inspired single-propeller RC aerobatic aircraft with a low-mounted wing, streamlined fuselage and compact landing gear. Separate geometry and preparation files are supplied. PACKAGE CONTENTS 2 PDF files, 9 GCODE files, 9 FACTORY files, 4 INI files, 4 SLICE files, 38 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Supermarine Spitfire Mk IX & Mk XVI — 3D Printable RC Aircraft

A Spitfire-inspired RC warbird collection with characteristic elliptical wings and a single-propeller layout. Source folders include Mk IX and Mk XVI material; variants and alternate files are retained rather than presented as one interchangeable set. PACKAGE CONTENTS 4 PDF files, 1 DWG file, 68 GCODE files, 64 FACTORY files, 129 STL files, 6 INI files, 6 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Universal RC Airplane Control Horn / Servo Surface Mount

Purpose This model is a universal, lightweight control horn designed to serve as a mechanical link between servo pushrods and control surfaces, such as ailerons, elevators, or rudders. It is intended for use in RC model airplanes, scratch-built foam board flyers, and custom hobby robotics. Practical Uses The vertical arm features a stack of three precision adjustment holes to allow for fine-tuning of control throw geometry, mechanical advantage, and servo travel limits. The base includes dual anchoring tabs designed to be slotted and glued into foam or balsa control surfaces. Included Files - rc servo horn.3mf - rc servo horn stl.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Vehículos y transporteGratis

P-51 Mustang 1090 mm — Printable RC Airframe Kit

P-51 Mustang printable RC airframe from a separate source set labelled with a 1090 mm wingspan. The design has a streamlined fuselage, low wings, canopy area and conventional tail, with segmented components and alternate source part variants. PACKAGE CONTENTS The ZIP contains 28 unique original STL files for ailerons, fuselage sections, cockpit, nose, engine-section geometry, stabilizers, tail sections, servo mount and wing sections, with new English filenames and an English source-label guide. Exact byte-identical duplicates are supplied once. Original STL bytes and coordinates are unchanged. The viewer shows one source component in its original printing pose. Download the complete ZIP for all parts. DESIGN AND ASSEMBLY This is a separate source-labelled 1090 mm airframe design. It is not a confirmed interchangeable variant of the existing 3DLabPrint P-51D listing. Alternative files remain separate designs and should not all be assembled simultaneously. Select a consistent configuration, inspect dimensions, thin walls, hinge gaps, component fit, supports and print orientation, and supply appropriate purchased hardware and electronics. The 1090 mm designation comes from the source collection name; MESHOPIA has not independently verified the assembled wingspan. Motor, propeller, radio, battery, electronics and purchased hardware are not included. Printing, physical assembly, balance and flight readiness have not been tested. ORIGINAL MESHOPIA PRESENTATION It illustrates the airframe, without an added propeller or landing gear. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar