Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

30 modelos etiquetados · Página 1 de 1

#wheel

Descubre modelos 3D etiquetados como wheel y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Rueda TurboFun para drift RC a escala 1:10

Rueda TurboFun para drift RC a escala 1:10

Rueda TurboFun identificada por la fuente para modelismo de drift a escala 1:10. La documentación disponible se limita al nombre del diseño y su etiqueta de uso; no confirma diámetro de hexágono, desplazamiento, ancho ni neumáticos compatibles. Estas medidas deben obtenerse del archivo y compararse con el coche antes de imprimir. Preparación, compatibilidad e impresión Mantén la escala original durante la primera comprobación. Revisa el alojamiento central, el paso del eje y la separación respecto a los brazos de suspensión. El hecho de compartir escala 1:10 no garantiza compatibilidad entre ruedas y vehículos. No se dispone de material, relleno ni resistencia ensayada; trata la primera impresión como comprobación dimensional.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Bmw CE04 rear wheel logo adapter

Bmw CE04 rear wheel logo adapter

Descripción del autor · Vlad Dogarescu (Printables) BMW CE 04 Wheel Logo Adapter A simple 3D-printable adapter that allows you to install a 68 mm BMW wheel emblem on the BMW CE 04, giving the wheels a much more finished, classic BMW look. I originally designed this for my own CE 04 because I felt the stock wheel hubs looked a little too plain. After a few hours of 3D modeling, the first print worked perfectly. What you need - The included 3D-printed adapter - 68 mm BMW wheel emblem/logo - Suitable screws/fasteners for mounting Standard 68 mm BMW emblems are widely available online and are relatively inexpensive. Printing The model is straightforward to print and does not require any particularly exotic settings or materials. For something mounted this close to the wheel and exposed to heat, water and sunlight, I recommend PETG, ASA or ABS rather than PLA. Installation The adapter mounts to the existing wheel hub and provides a holder for the 68 mm BMW emblem. No permanent modification to the scooter is required. Optional: Floating BMW Logo You can also use a 68 mm floating/self-leveling BMW wheel emblem, which keeps the BMW logo upright while the wheel rotates. These look great, but they are considerably more expensive than standard emblems. Compatibility Designed specifically for the BMW CE 04. If you print it, I'd love to see a photo of how it looks on your CE 04! Fuente: https://www.printables.com/model/1809889-bmw-ce04-rear-wheel-logo-adapter

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Hexágonos de rueda V2 para crawler Hornet CyberBrick

Hexágonos de rueda V2 para crawler Hornet CyberBrick

Segunda versión de los adaptadores hexagonales de rueda del crawler Hornet basado en CyberBrick. El autor indica que se necesitan cuatro tuercas M8 para el conjunto. La descarga contiene las piezas impresas y no incluye esa tornillería. No se especifican en el texto todas las medidas de eje o llanta compatibles. Preparación, compatibilidad e impresión Comprueba la variante del Hornet, el alojamiento de las tuercas y el encaje de las llantas antes de imprimir. Evita deformar el alojamiento al insertar las tuercas y verifica que las ruedas giren sin rozar. No hay material, capa ni relleno documentados. Tras montar, revisa retención, juego y concentricidad antes de utilizar el vehículo.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires

OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires

OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires Purpose This model is a remix of the original OpenRC 1:10 4WD Truggy Concept RC Car Rims. It is specifically redesigned to be compatible with HobbyKing 1:10 Monster Truck 10-Spoke tires. Practical Uses By utilizing these rims with the specified HobbyKing tires, the vehicle achieves a much wider stance. This modification is intended to provide improved stability during turns. Included Parts - truggy_rim.stl Printing and Assembly Guidance Recommended print settings include using no supports and an infill of 100%. The use of rafts is listed as "Doesn't Matter." Regarding materials, the author used PETG and notes that ABS will be fine. The author has no experience using PLA for this model.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Truggy Rim

RC Truggy Rim

RC truggy RIM Purpose This model is a replacement rim designed specifically for the truggy designed by dukedoks. It was created to provide a compatible rim option for wheels that originally lacked one. Practical Uses This part is intended for use on a 1:10 scale RC truggy to allow for the mounting of tires. Included Parts - rim.stl Dimensions - Width: 50mm - Total diameter: 79mm - Tyre bead diameter: 73.5mm - Hub offset: 25.6mm - Hexagon: 12mm Printing and Assembly Guidance Print the model from the bottom side. Supports are required to hold the central cylinder during the printing process.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 14mm Hex RC Drift Tires

14mm Hex RC Drift Tires

14mm Hex Rc Drift Tires Purpose These tires are designed for 1/10 scale RC cars, specifically engineered for drifting applications. They are designed to fit vehicles utilizing a 14mm hex. Practical Uses These tires are particularly designed for use with the Arrma Senton. They serve as a replacement or upgrade for 1/10 scale RC drift setups. Included Parts - 1 x Drift Tires.stl Specifications - Diameter: 111mm - Width: 47mm - Hex Size: 14mm

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC All-Terrain Vehicle Wheel

RC All-Terrain Vehicle Wheel

This model set consists of all-terrain vehicle wheels designed for RC applications. The design is intended to provide traction and flexibility across various surfaces. **Purpose** The purpose of these models is to provide functional, flexible wheels for all-terrain vehicles, specifically optimized for RC use. **Practical Uses** These wheels are suitable for remote-controlled vehicles navigating uneven or rugged terrain where grip and shock absorption are required. **Included Parts** The model set includes the following files: - dick.stl - koleso 02.stl - koleso 01.stl - koleso.stl **Printing Guidance** The author suggests using TPU or TPY materials to achieve the necessary flexibility for all-terrain performance.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Car Hex Attachment for wheels

RC Car Hex Attachment for wheels

RC Car Hex Attachment for wheels Purpose This model is a hex attachment designed for use with GP Toys Judge S920 wheels. The creator originally designed this part to facilitate mounting larger, air-filled GP Toys tires onto a DEERC RC car. Practical Uses It serves as a replacement or custom hex attachment for RC car wheels. While intended for specific compatibility between GP Toys tires and DEERC vehicles, the creator notes it can be used with other RC cars that utilize hex attachments. Included Parts - RC Car Tire Attachment .stl Printing and Assembly Guidance The creator notes that achieving a perfect fit may require trial and error due to potential variations in 3D printer filament. The model is described as a fast print. Users are encouraged to attempt the print and share their results (makes) to assist in refinement. Note that the creator experienced difficulty with fitment during personal testing, suggesting that assembly success may depend on screw tightening and material properties.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Open RC Upgrade Wheel Hub 1:8

Open RC Upgrade Wheel Hub 1:8

Open Rc Upgrade wheel HUB 1:8 Purpose This upgraded wheel hub is designed for Open RC users experiencing difficulties caused by powerful motors and high torque. It is intended to hold the axle firmly in place and enable proper wheel torquing. Practical Uses It serves as a replacement or upgrade for standard hubs in 1:8 scale Open RC applications where high torque performance is required to maintain axle stability. Included Parts The model includes the WHEEL HEX NUT.stl file. Assembly Guidance Assembly requires a square M3 nut and M3x6 worm screws. The design utilizes two M3 screws and M3 rectangular nuts to secure the axle.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Wheel Offset Gauge for RC Drift

Wheel Offset Gauge for RC Drift

Wheel Offset Gauge for RC Drift Purpose This tool is designed to compare wheel offsets for 1/10 scale RC drift cars. It allows a user to determine the specific offset of a wheel by measuring how far it sits from the hex. Practical Uses To use the tool, fully insert it into a 12mm wheel hex and press the slider against the back edge of the wheel. The offset is indicated by the line that aligns with the top edge of the gauge. The tool features a measurement range from 0 to 10mm of offset. Included Parts - RC Drift Offset Tool - Slide.stl - RC Drift Offset Tool - Gauge.stl Printing and Assembly Guidance Print the gauge on its top face (the end without the peg). To capture the slider, pause the print between 5mm and 20mm z-height, install the slider, and then resume printing. Using adaptive or variable layer heights is recommended to make the printed numbers more legible.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Wheel

Wheel

Wheel Purpose This model is a basic wheel designed for a wide variety of applications. According to the source, it is intended to be used for "lots of things." Practical Uses Based on the provided tags, this wheel is suitable for projects involving toys, remote control (RC) vehicles, cars, trucks, motorcycles, or motorbikes. Included Parts - wheel.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de SG116MAX inside wheel

SG116MAX inside wheel

SG116MAX inside wheel Purpose This model is designed as a replacement inner wheel for the SG116MAX RC car. The design features added material specifically to account for the use of weaker filaments. Practical Uses It serves as a functional replacement part for maintaining or repairing an SG116MAX RC car, providing a reinforced option for users printing with less robust materials. Included Parts - SG116MAX Wheel.stl Printing and Assembly Guidance Not provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de KamAZ Dakar RC Beadlock wheels

KamAZ Dakar RC Beadlock wheels

KamAZ Dakar RC Beadlock wheels designed for use with 1.9 RC tyres. These wheels are modeled after the KamAZ Dakar style for remote control applications. Purpose The purpose of this model is to provide beadlock-style wheels for 1.9 scale RC vehicles, specifically themed after the KamAZ Dakar racing trucks. Practical Uses These wheels are intended for use in RC crawling or racing setups where 1.9-inch tires are utilized. The beadlock design helps secure the tire to the rim. Included Parts The model files include: - Wheel 1.stl - Wheel 2.stl - Wheel 3.stl - Wheel insert v3.stl Assembly Guidance Each wheel requires 10 2x20mm screws for assembly.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FRC VEX 3in Wheel Hubs | FRC 4099 The Falcons

FRC VEX 3in Wheel Hubs | FRC 4099 The Falcons

FRC VEX 3in Wheel Hubs | FRC 4099 The Falcons Purpose This model serves as an adapter to connect VEX 3-inch compliant wheels to a 0.5-inch hex shaft. It was utilized by FRC team 4099 - The Falcons on their 2023 Charged Up robot. Practical Uses This component is designed for FRC applications where standard VEX compliant wheels need to be mounted onto hex-shaped drive shafts. Included Parts - 3in_vex_hub.stl Printing and Assembly Guidance The author recommends printing these hubs using PETG or ABS to achieve the best results and ensure durability. To assemble the component, simply stretch the wheel over the hub.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Tarmo5 Wheel Hex Adapter (14 to 17)

RC Tarmo5 Wheel Hex Adapter (14 to 17)

RC tarmo5 Wheel Hex Adapter (14 to 17) Purpose This model is an RC hex adapter designed specifically for the tarmo5. It serves to adapt wheel dimensions from 14mm to 17mm. Practical Uses This adapter is intended for use with the tarmo5 RC car to facilitate the use of different wheel hex sizes. Included Parts - RC Wheel 14mm_to_17mm adapter.stl - RC Wheel 14mm_to_17mm plate.stl Attribution: Based on the tarmo5 model by https://www.printables.com/de/model/348623-3d-printed-rc-car-tarmo5

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Miniature DC Motor Wheel

Miniature DC Motor Wheel

Purpose This model is designed to serve as a wheel for a Type 130 miniature DC motor. Practical Uses The parts are intended for use with a Type 130 miniature DC motor. The design utilizes a friction fit onto the motor shaft; the author notes that while the fit is sometimes tight, it most often fits well. Included Parts - Wheel DC Motor.stl - Outer Wheel DC Motor.stl Printing and Assembly Guidance The print is small and requires no supports. While the author printed their version in ABS, they state it should work for any filament. The outer wheel attachment is also a friction fit.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Airless Wheel Concept

Airless Wheel Concept

This model is an airless wheel concept inspired by Michelin Airless tyres. Practical uses include applications for RC cars or similar projects requiring non-pneumatic wheels. Included parts: - Wheel Rim Solid.stl - Tyre Flexible 0% Infill 1 Wall count.stl Printing and assembly guidance: The author recommends printing the rim in PLA or PETG and the tyre in TPU or another flexible material. When using Cura, change the infill to 0% and the wall count to 1.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Wheel for 68mm RC rubber tyres

Wheel for 68mm RC rubber tyres

This model is a wheel hub designed specifically for use with 68mm RC rubber tyres. Purpose The purpose of this model is to serve as the central hub for mounting 68mm RC rubber tyres to a vehicle chassis. Practical Uses It is intended for RC (remote control) applications where 68mm rubber tyres are utilized. The design allows for mounting via standard hardware. Included Parts The listing includes the wheel-hub.stl file. Assembly Guidance According to the author, the hub is designed to be fitted onto an M5 Allen head bolt. It requires a 4mm M5 nut for secure installation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Wheel chock RC cars 1/8

Wheel chock RC cars 1/8

This model set consists of a small wheel chock and a corresponding holder designed for a winch truck. The author created these components to assist with the task of dragging another car up a hill. Practical Uses The set is intended for use with winch trucks to provide wheel chocking capabilities during hill climbs or when dragging vehicles. Included Parts The files included in this set are: - WheelChock.stl - Holder chock wheel v1.stl - WheelChock_0.4n_0.2mm_PLA_MK4IS_2h8m.bgcode Attribution: 3dsets

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Drift Wheel Holder / Tube

Drift Wheel Holder / Tube

Purpose This tube is designed to organize wheel sets for an RC drift car. The design includes holes at the bottom of the tube to prevent a vacuum from forming. Practical Uses The holder is intended to store up to four wheels and tires. When fully loaded, the design allows the tube to be turned upside down without the contents moving. Included Parts - drift wheel tube v5.stl - Drift Wheel Tube.3mf Printing and Assembly Guidance The author recommends printing with a 0.28mm layer height and 5 walls. For assembly, let the cap cool before attaching it to the tube to allow for slight shrinkage, which results in a more secure fit.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Wheel with universal quadrant for gear motor

Wheel with universal quadrant for gear motor

This model is a wheel featuring a universal quadrant designed for use with a gear motor. The author specifies dimensions of 2 cm in width and 6 cm in diameter, noting it is intended for adding rubber. Practical uses include integration into robotic chassis or RC projects requiring motor-driven wheels. Included files: ruedaaa.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Classic Coupe Wheel — Printable Scale Model Part

Classic Coupe Wheel — Printable Scale Model Part

A faceted wheel with a concentric recessed center, supplied as one STL from a classic 1940 coupe model collection. This download contains the wheel only. No car body, axle, fasteners or tires as separate components are included. Fit and scale must be checked against the intended miniature. PACKAGE CONTENTS 1 unique STL files, renamed in English. Original geometry is preserved. No physical accessories are supplied. PRINTING AND USE No printer settings or build test are verified. Inspect the mesh and select orientation, supports, material and size for the intended miniature. Assembly compatibility has not been independently tested. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 based on the uploader authorization. The cover is an original visualization generated locally from the supplied geometry; background tools are not included.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de BBS RS-Style Wheel — 84 x 42 Source Design

BBS RS-Style Wheel — 84 x 42 Source Design

A BBS RS-style scale wheel mesh with a dense cross-spoke lattice, open centre hub, outer bolt-detail ring and deep rim barrel. Suitable as a starting point for miniature vehicle detailing, display builds and custom wheel projects. The complete ZIP includes the original single STL, renamed in English, and an English file guide. The separate STL provides the same source geometry for inspection. The source name includes 84 x 42; units and fit have not been verified, so this is a source design identifier rather than a guaranteed dimension. Check mesh integrity, thickness, units, axle bore, tyre size and clearance before printing or fitting. No particular RC chassis, hub pattern, working load or tested print settings are guaranteed. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. These props are not included. Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader. Original source geometry preserved.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Truck Wheel Rim — Design 01

Truck Wheel Rim — Design 01

Truck Wheel Rim — Design 01 supplied as an STL scale-model component with a rounded outer lip, recessed circular centre, ring of raised bolt details and oval ventilation openings. It can be used as a starting point for miniature vehicle detailing, wheel assemblies and custom display projects. The complete ZIP contains the original single STL with an English filename and an English file guide. The separate STL supplies the same geometry for inspection. Original numerical coordinates and mesh data are preserved. Before printing or fitting, check units, diameter, width, hub clearance, tyre fit, wall thickness, mesh integrity, orientation and supports. No fixed scale, specific vehicle compatibility or tested printing settings are verified. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. The tyre and tools are illustrative props and are not included. Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Truck Wheel Rim — Design 02

Truck Wheel Rim — Design 02

Truck Wheel Rim — Design 02 supplied as an STL scale-model component with a tall cylindrical barrel, deeply recessed hub face, raised fastener details and ventilation openings inside the well. It can be used as a starting point for miniature vehicle detailing, wheel assemblies and custom display projects. The complete ZIP contains the original single STL with an English filename and an English file guide. The separate STL supplies the same geometry for inspection. Original numerical coordinates and mesh data are preserved. Before printing or fitting, check units, diameter, width, hub clearance, tyre fit, wall thickness, mesh integrity, orientation and supports. No fixed scale, specific vehicle compatibility or tested printing settings are verified. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. The tyre and tools are illustrative props and are not included. Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Truck Wheel Rim — Design 08

Truck Wheel Rim — Design 08

Truck Wheel Rim — Design 08 supplied as an STL scale-model component with a broad radial spokes, rounded outer lip, raised hub, large fastener details and open spaces between the spokes. It can be used as a starting point for miniature vehicle detailing, wheel assemblies and custom display projects. The complete ZIP contains the original single STL with an English filename and an English file guide. The separate STL supplies the same geometry for inspection. Original numerical coordinates and mesh data are preserved. Before printing or fitting, check units, diameter, width, hub clearance, tyre fit, wall thickness, mesh integrity, orientation and supports. No fixed scale, specific vehicle compatibility or tested printing settings are verified. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. The tyre and tools are illustrative props and are not included. Published by MESHOPIA under CC0 with redistribution authorization confirmed by the uploader.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Troller — Off-Road Body and Wheel Set

Troller — Off-Road Body and Wheel Set

A Troller compact off-road vehicle body and wheel set supplied as two STL files: one body shell and one wheel mesh. The body features a compact three-door outline, squared window openings, ribbed roof, wheel arches and bumper forms. The single wheel mesh can be duplicated by the user as needed. A working chassis, axles, tyre materials, glazing and electronics are not supplied; our assembled cover uses illustrative installation accessories. Exact Troller variant, scale and compatibility are unverified. COMPLETE SOURCE PACKAGE The English-named ZIP retains all original geometry bytes and supplied companion documents. The included file guide maps each renamed file to its source. Historical supplier documents are retained for source context; CC0 redistribution authorization has been separately confirmed by the uploader. Native print units must be checked before fabrication. No mesh is replaced by an AI-generated model. ON-DEMAND 3D VIEWS Choose each separate STL in the part selector. These are normalized, approximate lightweight display conversions, simplified for browser performance; they do not establish fabrication dimensions or replace the complete native files. Source mapping: - troller-off-road-body-wheel-set-geometry-001.stl: separately selectable display mesh. - troller-off-road-body-wheel-set-geometry-002.stl: separately selectable display mesh. PREPARATION AND ASSEMBLY Inspect source meshes in your preferred editor or slicer before use. Exact scale, dimensions, wall thickness, watertightness, printability, assembly tolerances and functional compatibility are untested. Use the original native files for fabrication preparation. No tested printing settings or RC performance are claimed. ORIGINAL MESHOPIA USE IMAGE An own locally generated, AI-assisted photorealistic image shows an illustrative assembled model in use, guided by inspected source geometry and assembly references. It is not evidence of a manufactured item or physical print. The scene, surface finishes and additional installation accessories are illustrative. Supplier pictures and geometry reference sheets are not published in the gallery. LICENSE Author and publisher: MESHOPIA. CC0 redistribution authorization confirmed by the uploader.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar