Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

14 tagged models · Page 1 of 1

#adapter

Discover 3D models tagged adapter and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Bmw CE04 rear wheel logo adapter

Bmw CE04 rear wheel logo adapter

Author Description · Vlad Dogarescu (Printables) BMW CE 04 Wheel Logo Adapter A simple 3D-printable adapter that allows you to install a 68 mm BMW wheel emblem on the BMW CE 04, giving the wheels a much more finished, classic BMW look. I originally designed this for my own CE 04 because I felt the stock wheel hubs looked a little too plain. After a few hours of 3D modeling, the first print worked perfectly. What you need - The included 3D-printed adapter - 68 mm BMW wheel emblem/logo - Suitable screws/fasteners for mounting Standard 68 mm BMW emblems are widely available online and are relatively inexpensive. Printing The model is straightforward to print and does not require any particularly exotic settings or materials. For something mounted this close to the wheel and exposed to heat, water and sunlight, I recommend PETG, ASA or ABS rather than PLA. Installation The adapter mounts to the existing wheel hub and provides a holder for the\n68 mm BMW emblem. No permanent modification to the scooter is required. Optional: Floating BMW Logo You can also use a 68 mm floating/self-leveling BMW wheel emblem, which keeps the BMW logo upright while the wheel rotates. These look great, but they are considerably more expensive than standard emblems. Compatibility Designed specifically for the BMW CE 04. If you print it, I'd love to see a photo of how it looks on your CE 04! Source: https://www.printables.com/model/1809889-bmw-ce04-rear-wheel-logo-adapter

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Adaptador de antena SMA para RadioMaster TX15

SMA antenna adapter for RadioMaster TX15

Mechanical adapter to mount an SMA antenna instead of the original antenna on a RadioMaster TX15 transmitter. The part solves the physical mounting; it does not convert electrical connectors nor determine which antenna is suitable for the transmitter's frequency and configuration. Preparation, compatibility, and printing Check the exact connector type, its fastening, and the available space before printing. Do not confuse SMA with physically similar variants. Ensure the mount does not strain the coaxial cable or interfere with controls and the casing. The source does not provide material, layer height, or hardware. Follow the transmitter's instructions for any intervention and do not use it with an incompatible antenna.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Adapter to convert CAPART RC2 Vest Support Lanyard mounts to RC-N Style Controllers

Adapter to convert CAPART RC2 Vest Support Lanyard mounts to RC-N Style Controllers

Adapter to convert CAPART RC2 Vest Support Lanyard mounts to RC-N Style Controllers Purpose This adapter is designed to allow DJI RC-N1, RC-N2, and RC-N3 style controllers to be attached to a mount originally intended for the RC2 controller. The author notes the design could potentially be used for other applications requiring the specific 4mm hole spacing of the original DJI RC2 mount. Practical Uses It serves as a conversion tool for users who have a vest mount system designed for the RC2 controller but wish to use RC-N series controllers instead. Included Parts - RC_N1_2_3_Vest_Mount_V03.stl - DJI_RCN_Clamp_Knobs_V01.stl - RC_N123_Holder_V01.stl Note: The author states this design was sculpted from an existing cradle design but is significantly modified from the original source.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DJI RC-N2 to RC2 Mounting Holes Adapter

DJI RC-N2 to RC2 Mounting Holes Adapter

DJI RC-N2 to RC2 Mounting Holes Adapter Purpose This adapter is designed to allow DJI RC-N1, RC-N2, and RC-N3 controllers to emulate the specific 4mm hole pattern and spacing found on the RC2 controller. Practical Uses By replicating the RC2 mounting configuration, this adapter enables the attachment of lanyard hooks or other compatible devices to the RC-N series controllers. Included Parts - DJI_RCN_Vest_Attachment_V01.stl - RC_N1_2_3_Vest_Mount_V05.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de DC Motor Adapter for Flexible Dremel Shaft

DC Motor Adapter for Flexible Dremel Shaft

DC Motor Adapter for Flexible Dremel Shaft Purpose This 3D-printed adapter is designed to connect a flexible Dremel extension to a small DC motor. It serves as a bridge to allow the use of Dremel-style flexible shafts with standard DC motor setups. Practical Uses This tool is intended for use in workshops or DIY builds, specifically for projects requiring a flexible extension attached to a motor, such as polishing or grinding tasks. Included Parts The design includes .STL and .3mf files. The author notes that the screw shown in the product photos is provided only as an example of assembly and is not included in the design. Printing and Assembly Guidance The motor mount is specifically designed for a motor body diameter of 30.3 mm. It features an M18x2 threaded connection and a 3 mm shaft coupling. The provided .STL file is fully editable, allowing users to modify dimensions to fit specific motor requirements or project needs.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de FRC Falcon spline to hex shaft

FRC Falcon spline to hex shaft

FRC Falcon spline to hex shaft. Purpose This model is a small adapter designed for a VEX Falcon motor. It functions to convert the OEM motor shaft to a HEX shaft without the requirement of a gearbox. Practical Uses It is intended for use in FRC (FIRST Robotics Competition) applications where a direct connection between a VEX Falcon motor and a hex-shaped shaft is needed. Included Parts - FalconSpline.STL Printing and Assembly Guidance To print this model, use 101% scale and 100% infill.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Mosaic Palette CR-10S Pro Adapter

Mosaic Palette CR-10S Pro Adapter

Mosaic Palette CR-10S Pro Adapter Purpose This adapter is designed to facilitate the use of a Mosaic Palette 2S with a Creality CR-10S Pro V2 printer that is equipped with a filament run-out sensor. Practical Uses It serves as a connection component to integrate the Mosaic Palette 2S system with the specific hardware configuration of the Creality CR-10S Pro V2. Included Parts The model includes the following file: - Staffa.STL Assembly Guidance According to the author, the assembly requires the black part from the older Mosaic adapter, which must be placed directly. The author also states that the same screws used previously can be used for this installation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Creality CR-6 Filament Spool Holder Adapter

Creality CR-6 Filament Spool Holder Adapter

Creality CR-6 Filament Spool Holder Adapter Purpose This model serves as an adapter for Creality CR-6 printers. It is a custom adjustable filament spool holder, originally designed by meireles for the Anycubic i3 Mega. Practical Uses This adapter allows for an adjustable filament spool holder setup on a Creality CR-6 printer. Included Parts - Insert.3mf - Nut.3mf Printing and Assembly Guidance The author reports printing the model using regular PLA at a 0.2mm layer height.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de CR-10 V2 Metal Dual Gear Extruder Runout Sensor Adaptor

CR-10 V2 Metal Dual Gear Extruder Runout Sensor Adaptor

CR-10 V2 Metal Dual Gear Extruder Runout Sensor Adaptor Purpose This adapter plate is designed to align the CR-10 V2 runout sensor with a metal frame dual gear extruder. It addresses the issue where common metal frame dual gear extruders (such as the Redrex brand) have a filament input hole that is positioned higher and slightly off-center compared to a standard Creality extruder. Practical Uses This model is used to reposition the runout sensor so that it correctly aligns with the filament path of specific aftermarket metal frame dual gear extruders on a CR-10 V2 printer. Included Parts The model is provided in two distinct versions to accommodate different hardware preferences: - One version features countersunk holes, designed to mount to the CR-10 using four M3x12 flat head screws. - The second version features counterbore holes, designed to mount using four M3x8 button head or cap screws. Assembly Guidance The runout sensor mounts directly to the plate using the stock screws, which thread into the plate itself.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Tarmo5 Wheel Hex Adapter (14 to 17)

RC Tarmo5 Wheel Hex Adapter (14 to 17)

RC tarmo5 Wheel Hex Adapter (14 to 17) Purpose This model is an RC hex adapter designed specifically for the tarmo5. It serves to adapt wheel dimensions from 14mm to 17mm. Practical Uses This adapter is intended for use with the tarmo5 RC car to facilitate the use of different wheel hex sizes. Included Parts - RC Wheel 14mm_to_17mm adapter.stl - RC Wheel 14mm_to_17mm plate.stl Attribution: Based on the tarmo5 model by https://www.printables.com/de/model/348623-3d-printed-rc-car-tarmo5

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de 12mm to 17mm Hex Adapter

12mm to 17mm Hex Adapter

Purpose This adapter enables the installation of 17mm hex wheels onto 12mm hex spindles. Practical Uses The author states the provided STL files are designed specifically for the wheels found at https://aliexpress.com/item/1005005155368361.html. Users can modify dimensions using the included SCAD files or scale the model within a slicer. An M5 DIN 9021 washer with a 15mm outer diameter is required for use. Included Parts - Hex.stl - Sleeve.stl - Sleeve.scad - Hex.scad

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Honda CR-V Gen 1 Coke Can Holder (0.33l EU)

Honda CR-V Gen 1 Coke Can Holder (0.33l EU)

This adapter is designed for a first Gen Honda CR-V to hold 0.33l Coke cans. It is specifically sized for standard EU cans with a 60mm diameter. Included files: - Canholder_Coke_Adapter_EU V2.0.3mf - Canholder_Coke_Adapter_EU.stl IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de CR-200B Dragonfly BMS adapter

CR-200B Dragonfly BMS adapter

Purpose: This adapter lowers the hotend to ensure compatibility with default part cooling. According to the author, this positioning allows the hotend fan to blow air directly to the radiator rather than the heatblock. Practical Uses: Designed for use with the Dragonfly BMS hotend on a CR-200B printer. Included Parts: - Dragonfly adapter.stl - Dragonfly adapter.step Hardware Needed: - Stock CR-200B hotend screws to attach the adapter to the toolhead - Stock Dragonfly BMS screws to attach the hotend to the adapter - 2pcs M3x5x4 heat inserts (voron-like) Printing/Assembly Guidance: Reorient the model in the slicer so the larger side with four holes is at the bottom. Use high-temperature materials such as ABS or ASA; the author advises against using PLA and suggests avoiding PETG. Print with a 0.2mm layer height, 0.4mm extrusion width, 4 walls, and 5 solid top/bottom layers. Use an infill of 20% or more with any infill type. No supports or rafts are required.

Technology
Sin probar
material
—
Difficulty
Sin especificar