Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

7 tagged models · Page 1 of 1

#cover

Discover 3D models tagged cover and check their print information, files and terms before downloading.Search this tag in the catalogue →
Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Cubierta frontal personalizable para emisora RC

Customizable front cover for RC transmitter

Purpose This model serves as a front cover for DIY RC transmitter projects. It is intended as a starting point for hobbyists building custom radio controllers and can be modified to accommodate different electronics. Practical Uses The cover is designed for housing custom radio controllers that utilize dual joysticks, a display, an antenna, and various switches. It features dual joystick openings, a display cutout, an antenna mounting hole, and switch mounting positions. Included Parts - case 1 remote.stl - case 1 remote.step Printing and Assembly Guidance The author reports that the model is easy to print without the need for complex supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Battery Cover for Nikko Remote Control #94150

Battery Cover for Nikko Remote Control #94150

This model is a replica battery cover designed for the Nikko Remote Control #94150. It was created to serve as a replacement part for users who have lost the original cover. 1. Purpose: To provide a replacement battery compartment cover for the Nikko Remote Control #94150. 2. Practical Uses: Restoring the battery compartment functionality of a Nikko RC remote control. 3. Included Parts: One STL file containing the Battery Cover for Nikko Remote Control 94150. 4. Printing/Assembly Guidance: The author specifies that supports are required during the printing process to correctly form the screw hole and the small insert located on the back of the model.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de RC Nitro Custom Battery Box cover

RC Nitro Custom Battery Box cover

RC Nitro Custom Battery Box cover Purpose This model is a custom battery box cover designed specifically for a nitro-powered RC car. It serves as a protective lid for the battery compartment. Practical Uses It is intended for use in nitro RC vehicles to secure the battery within its housing. The author has provided the original design files to allow users to modify the geometry to fit specific vehicle requirements or personal preferences. Included Parts - RC_batterybox_lid_v0.4.2.3.stl (STL file) - RC_battery_box_lid.fcstd (FreeCAD source file) Printing and Assembly Guidance Users wishing to customize the dimensions or shape of the cover can utilize the included FreeCAD file to make necessary adjustments before printing.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Ender & CR-10 X Axis Cover Redesign

Ender & CR-10 X Axis Cover Redesign

Ender & CR-10 X Axis Cover Redesign Purpose This model is a redesign of the X-axis cover specifically intended for printer setups where the hotend cables pass in front of the Z axis. Practical Uses It serves as a functional modification for Ender and CR-10 series printers to accommodate specific cable routing requirements. Included Parts - X-Axis Cover Redesign.stl Printing and Assembly Guidance The author reports printing this model using PETG. Users should follow the instructions provided by FedorSosnin for successful implementation.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de CR-10 / CR-10S X axis right side cover

CR-10 / CR-10S X axis right side cover

Purpose: 1. This is an X-axis right side cover designed for aesthetic purposes to cover the bare metal look of the printer. It is not a functional X-axis tensioner. 2. The design is intended to sit on the side of the printer without interfering with the extruder or the belt. 3. Practical Uses: Use as a decorative shield for the Creality CR-10 or CR-10S models. 4. Included Parts: Cache_X_CR-10_OUT_EXTENDED.stl, Cache_X_Cr-10S_IN_EXTENDED.stl, Cache_X_CR-10_OUT.stl, Cache_X_CR-10S_OUT_EXTENDED.stl, Cache_X_CR-10_IN_EXTENDED.stl, Cache_X-CR10S_IN_EXTENDED_BOLD.stl, X_axis_shield-without_text_EXTENDED.stl, Cache_X_CR-10_IN.stl, X_axis_shield_without_text.stl, Cache_X_CR-10S_OUT.stl, Cache_X_CR-10S_IN.stl. 5. Printing/Assembly Guidance: Print with 15-30% infill and higher resolution. Supports are not required. The author suggests printing on the right (hollow) side of the shield to simplify cleanup and avoid wasting material in supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar