4 modelos etiquetados
An RC crawler mount designed to position the servo as low as possible. It includes a snug compartment for a 4S LiPo battery, intended to eliminate the need for a strap. Printing instructions from the author: printed on a Neptune 4 Pro with 100% infill, 0.2mm layer height, 120mm/s speed, and tree supports.
A servo mount designed to allow the replacement of the original steering servo with a standard RC servo for a 4WD crawler.
A 1/24 scale RC crawler body designed from a 3D scan. The author provides STEP files to allow for adjustments to size and wall thickness. The author recommends printing at a 45-50 degree angle using organic supports.
A calibration and test component for the GECKO 1:10 scale expedition RC crawler. The author describes this as the most complex part of the GECKO car and suggests printing it to test printer setup and support removal capabilities before attempting the full model. The part is designed to test bearing fitment; the author instructs to try inserting a 10x15x4mm bearing into the printed part, noting it must fit while not being loose. Files included: - Mask v12.stl - Bearing test.stl User guides are available at: English: https://docs.google.com/presentation/d/1dInJxMR8JbT4WAQ2nmCC5T9L01qRvq_ybQPWrYpnJKM/ Czech: https://docs.google.com/presentation/d/1wbs5QiYH1Vbw_d3C4b6p0NXMn9g46bp0j0qfl-lFl6A/