228 tagged models · Page 1 of 5

#stl

Discover 3D models tagged stl and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Whisbang RC whistling bombs

Whisbang is a whistling accessory for RC activities. Its hollow body and openings are intended to produce sound as it moves through the air; it has no explosive function. POSSIBLE USES - Add an acoustic effect to a controlled RC demonstration. - Explore airflow and resonant cavities in a hobby model. INCLUDED FILES - The supplied STL geometry. - The accompanying PDF document. GENERAL PRINTING SUGGESTIONS PLA is a straightforward material for an initial trial. Consider PETG, ASA or another material only when the intended environment requires different heat resistance, outdoor durability or toughness. A 0.20 mm layer height is a general starting point; a finer layer may improve surface detail. Choose a stable printing face and inspect overhangs, bridges and support requirements in the slicer. Print a sample or fit test before making multiple copies. CHECK BEFORE USE Do not add pyrotechnics or explosive loads. Avoid dropping or launching the accessory toward people, animals or property, and follow the rules of the RC flying field. The imported listing indicates FDM with PLA or PETG; these general suggestions must be checked against the actual model, printer and slicer profile. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Technology: FDM
material: PLA, PETG
Difficulty: Intermedia

RC & MecánicaFree

Soporte en L 40 × 40 mm · ancho 30 mm · 2 agujeros Ø5 mm

Escuadra de demostración de una sola pieza, con dos alas a 90° y un agujero pasante en cada ala. La imagen de uso ilustra la unión de un panel vertical a una base horizontal. MEDIDAS • Dimensiones exteriores: 30 × 40 × 40 mm. • Ancho: 30 mm. Extensión exterior de cada ala: 40 mm. • Espesor: 4 mm. • Dos agujeros nominales Ø5 mm, centrados en el ancho a 15 mm de cada lateral. Cada centro está a 26 mm del plano exterior del encuentro y a 14 mm del extremo libre. QUÉ INCLUYE Un STL con el soporte y un archivo LEEME con medidas, unidades y comprobaciones. La madera, los tornillos y las arandelas del render son ilustrativos y no están incluidos en el STL. No se especifica un sistema de fijación validado. UNIDADES Y VERIFICACIÓN Importar el STL en milímetros y comprobar un tamaño de 30 × 40 × 40 mm: el formato STL no almacena unidades. La malla exportada tiene 804 triángulos, un único componente conectado, orientación coherente, sin bordes abiertos ni triángulos degenerados. Se verificaron digitalmente los dos pasos y el espesor. ESTADO DEL DISEÑO Modelo creado en Blender con asistencia de Codex. Las imágenes son renders, no fotografías de una impresión. No se ha impreso ni ensayado físicamente; no hay material, perfil de impresión ni carga admisible validados. Ajustar orientación, soportes, paredes, relleno y tolerancias según impresora, material y aplicación. Diseño de demostración, sin validación mecánica para usos estructurales o de seguridad.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

3D Printable RC Car Chassis — 160 & 180 mm Wheelbase

Build a custom RC car with this downloadable set of 24 STL files. The package includes two chassis variants with 160 mm and 180 mm wheelbases, plus drivetrain, steering, wheel and mounting components. Included parts: • Chassis: 160 mm and 180 mm wheelbase options • Main-shaft and motor gears, gear sleeve and axle transmission gears • Universal joints A/B/C and dogbone drive shafts • Front/rear axles, wheel axles, wheel brackets and rear wheel mounts • Steering knuckles and linkage, servo mounting plate and linkage • Wheel rims, TPU tire models, brake parts, brake discs and shock-absorber plates All STL filenames are in English. Quantity hints in the filenames follow the supplied source names; inspect each model in your slicer before choosing the number of copies. Choose the chassis variant that suits your build. This is a digital download, not an assembled vehicle. Electronics and non-printed hardware are not included. Assembly instructions, a hardware bill of materials and tested print settings were not supplied with this package. Check fit, clearances and component compatibility before printing or assembly. The cover is an AI-generated illustrative image and is not a photograph of a verified assembled build.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

1:10 OpenRC F1 2023 RC Car — 3D Printable STL Parts

Create your next open-wheel RC project with this 1:10 OpenRC F1 2023 parts package. The download contains 37 STL files for the body, chassis, steering, rear drivetrain, wings, wheels and detail parts. Included components: • Body and frame: center body, front/rear chassis plates, rear chassis, front vented section, lid and motor cover • Front steering module: upper/lower parts, front block, wheel axle, left/right hubs, servo saver and steering push pin • Rear drive: rear axle, pinion and spur gears, and left/right wheel axle holders • Aero and details: nose, front and rear wings, halo, mirrors, camera, shark fin and rain-light diffuser • Wheels: front/rear rims, front/rear tires and wheel lock nut • Extra parts: vented lid and servo holder Original author: Lucas. License: CC0. Filenames have been standardized in English; the supplied geometry is unchanged. Digital files only. Electronics and non-printed hardware are not included. No assembly guide, hardware bill of materials or tested print settings were supplied in this folder. Inspect each part in your slicer and check fit, quantities and compatibility before printing and assembly. The supplied cover is an AI-generated illustration, not a photograph of a verified assembled model.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Cyberbrick RC Dumptruck — 3D Printable Articulated Truck Parts

Build your next RC construction project with this Cyberbrick RC Dumptruck package: 77 STL files covering the front assembly, rear assembly, articulated hinge, transmission, wheels and 60 mm cylinder components. Included parts: • Front assembly: cab, roof, hood, frame, bumper, grille, fenders, platforms, light inserts, axle and drivetrain components • Rear assembly: rear frame, dump bed sections, tailgate and connecting rod, axle parts, wheel holders and cylinder mounts • Articulation: front/rear hinge, hinge clip and axle • Transmission: differential assembly, axle housing, frames, axles, 18-tooth outer gear and 9-tooth spur gear • Cylinder parts: housing, back housing, 60 mm rod, N20 cylinder rod components and clips • Wheels: rim, tire and mirrored tire • Additional clips, washer and non-motorized axle variant Original author: Lucas. License: CC0. English filenames include assembly prefixes to distinguish parts with similar names. STL geometry is unchanged. Digital files only. Electronics, motors and non-printed hardware are not included. No assembly manual, hardware bill of materials or tested print settings were supplied. Scale and specific Cyberbrick electronics compatibility are not verified. Check quantities, fit and component requirements before printing and assembly. The supplied cover is an AI-generated illustration and does not document a verified assembled model.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Circular-Base Display Stand for 1:10 RC Crawlers - STL and 3MF

Support an RC crawler on a dedicated stand for display or workbench access. The assembled reference shows a circular base, a central upright with reinforcing fins and an upper cross frame with two broad shaped supports. The source folder labels the project for 1:10 RGT crawlers and describes it as height adjustable. Specific vehicle fit and adjustment range have not been verified by MESHOPIA. Three files are included: a lower stand part in STL, an upper stand part in STL, and a 3MF stand project. They have been renamed in English while retaining their original contents. Inspect the upper and lower interfaces before assembly and review the 3MF layout in compatible slicing software. The 3MF is an additional project file, rather than a third separately named STL component. Compare the support shape and spacing with your crawler chassis. Choose print material, orientation, walls and supports after checking the model in your slicer. No physical stability test, rated load capacity or tested print profile is documented here. The vehicle and any additional hardware are not supplied. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Open-Lattice Service Ramp for 1:18 RC Cars - STL and 3MF

Create a small service or display ramp for an RC car. The source photograph shows two matching ramps side by side, each with a sloping top, rectangular tread openings and open rectangular side supports. The source folder and filenames label this design for 1:18 RC vehicles. The download includes one STL file and one 3MF file, supplied as alternative formats. These are two files, rather than evidence of two distinct ramp variants. Print additional copies as required for a pair. Both have English filenames and retain their original geometry and file contents. Check the ramp width, incline and wheel contact area in your slicer against the intended vehicle before printing. Compatibility, load capacity and print settings have not been physically tested by MESHOPIA. No vehicle, assembly hardware or separate instructions are included in the extracted package. Select material, orientation, walls and supports after inspecting the model. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Six-Wheel Moon Rover Chassis, Rocker Arms and Paddle Wheel - Ten STL Files and 3MF

Printable mechanical components from an RC Moon Rover source project. The supplied geometry includes two short bogie arms, two longer rocker arms, a narrow chassis link, a perforated upper platform, a lower platform with mounting features, two small connecting links and one wheel design with six broad spokes and chunky paddle-like tread blocks. The mirrored and standard arm files remain separate. The download contains ten unchanged original STL files and one unchanged original 3MF project, all renamed in English. One wheel mesh is supplied; repeat quantities must be determined for your build. The 3MF preserves its original project layout and does not constitute a validated assembly guide. No scale or universal hardware compatibility is established. The new cover presents an illustrative six-wheel arrangement constructed from the actual STL geometry. The wheel design is repeated six times and the rocker and bogie arms are positioned using their visible pivot and mounting features. The two body platforms are arranged above the wheel assemblies; the narrow link and two small connecting parts are displayed separately alongside. Blue and sand-colored structural parts, dark wheels, a changed camera angle and a new workshop setting distinguish the image from the source photo. This visual arrangement has not been mechanically validated. Motors, electronics, batteries, wiring, metal shafts and fasteners are not included. Check wheel attachment, motor brackets, pivot clearances, platform connections, link lengths and required hardware before fabrication. Assembly quantities and a tested printing profile are not supplied. MESHOPIA has not tested printing, fit, strength, suspension movement or powered operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Foldable RC Car Stand Platform, Open-Frame Legs and Insert Strips - Thirteen STL Files

A compact folding stand source project supplied as thirteen separate STL files. The geometry includes a rectangular platform with recessed circular openings and long channels, two complementary open-frame leg sections with cylindrical hinge features, four small flat tabs, four longer rounded-end strips and two shorter rounded-end strips. All repeated small pieces remain individual files. Thirteen unchanged original STL files are included with descriptive English filenames. The supplied names do not identify a tested vehicle scale, weight capacity, exact strip material or a validated assembly procedure. The main platform measures approximately 120 by 140 in the source coordinate units; STL does not store an explicit physical unit. Confirm slicer units and intended dimensions before fabrication. The new cover uses the actual meshes in an illustrative folded arrangement, with the two leg sections laid across the platform and the ten small tabs and strips shown separately alongside. Blue, sand and graphite finishes, a different angle and a new workshop background replace the source photograph. The image illustrates the components and does not verify hinge alignment, folding travel, load capacity or assembled function. Check hinge clearances, attachment hardware, strip fit, surface contact and vehicle support requirements before printing or loading the stand. A tested print profile, load rating and verified bill of materials are not supplied. MESHOPIA has not tested printing, fit, strength or stand operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Cyberbrick Cybertruck Body, Chassis, Wheels and Drivetrain Parts - Sixteen STL Files

Printable components from a CyberBrick RC Tesla Cybertruck source project. Inspection finds an angular pickup body shell with a sharply sloped cabin profile and rear bed, a chassis with raised wheel-area features and mounting posts, four wheel shells in one STL, front and top cover panels, two window-cover panels, front trim, LED-panel and cover pieces, a rear-light strip, a gearbox housing and cover, differential gears and shaft pieces, front-axle steering components, two separate drive or servo gears and a motor-retaining link. Several STL files contain multiple disconnected parts. Sixteen unchanged original STL files are included with descriptive English filenames. The CyberBrick and Tesla references identify the supplied source project; they do not establish official affiliation, a tested electronics configuration or universal hardware compatibility. No verified vehicle scale, assembly quantities or operating specification is supplied. The new cover arranges the actual body shell, chassis and four supplied wheel meshes in an illustrative vehicle configuration. Cover panels, window panels, trim, light housings and mechanical components are displayed separately alongside so that the remaining supplied parts can be seen. Blue structural parts, sand-colored loose components, dark wheels, a changed angle and a new workshop setting distinguish it from the source photo. This is a partial visual assembly with remaining parts alongside, not a verified finished RC build. The original downloads are unchanged. Motor, servo, CyberBrick electronics, batteries, wiring, functioning LEDs, metal hardware and rubber tires are not included as physical supplies. Check wheel interfaces, shaft dimensions, steering travel, gear engagement, gearbox clearances, body-panel alignment and all hardware requirements before fabrication. A validated bill of materials and tested printing profile are not supplied. MESHOPIA has not tested printing, fit, strength, lighting or powered vehicle operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

2WD RC Chassis Conversion Parts for a Mini 4WD Grasshopper V2 Project - Five STL Files

A mechanical conversion source project labeled 2WD RC Chassis V2 for Tamiya Mini 4WD Grasshopper. The supplied geometry includes a main chassis tray, mounting structures, steering and linkage pieces, cylindrical pivot or axle components, a toothed gear, six ring-shaped bushings and four deep-barrel wheel rims. An additional file labeled No Spring Parts contains an alternative mounting frame and two threaded cylindrical pieces. A large Frames file groups components on printable sprue-style frames and includes raised source lettering. Five unchanged original STL files are supplied with descriptive English filenames: gear and bushings, rims, the No Spring source parts, loose mechanical parts and framed parts. These are overlapping component groupings and a source variant, not five separate complete cars. Preserve the intended grouping and identify duplicate components before deciding print quantities. The Mini 4WD Grasshopper reference comes from the source name and does not establish a verified fit for every Tamiya version. No tested scale or validated assembly procedure is provided. The new cover shows the actual printable frame kit in blue with the alternative No Spring source components displayed separately in sand. A changed viewpoint and new workshop background replace the source assembled-car photo. The body shell, rubber tires, motor, radio electronics, battery, antenna, metal axles, bearings and fasteners shown in that photo are not included as physical supplies. The image is a component presentation and does not claim a completed working vehicle. Check donor-body attachment, rim interfaces, steering travel, gear mesh, pivot clearances, print quantities and hardware requirements before fabrication. A verified bill of materials and tested print profile are not supplied. MESHOPIA has not tested printing, fit, strength or powered RC operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

City Turbo-Style RC Body Shell and Alternative Front and Rear Sections - 1:10 Source Project

Three printable body meshes from a Honda City Turbo Tamiya-replica RC body source project labeled 1:10. The full shell has an upright compact hatchback profile, open window apertures, round headlamp openings, front grille details, hood vents, pronounced wheel arches and molded door outlines. Two additional meshes provide alternative front and rear body sections. These are alternatives to the full shell, rather than three pieces that must all be joined together. The download contains three unchanged original STL files renamed in English. The 1:10 scale and Honda/Tamiya references identify the supplied source project; dimensions and fit to a particular RC chassis have not been independently validated. No official manufacturer affiliation is implied. The new cover displays the actual complete body mesh in blue and the two alternative sections separately in a sand tone, with a changed viewing angle and workshop background. It shows the printable body components supplied by the files. Wheels, chassis, glazing, lights, electronics, fasteners and other physical hardware are not included. Check body dimensions, wheelbase, wheel clearance, mounting positions and section mating surfaces against your intended vehicle before fabrication. A tested print profile, assembly procedure and hardware bill of materials are not supplied. MESHOPIA has not tested printing, fit or vehicle operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Micro RC Storage Boxes with Sliding Lid Features - Micro B and Micro T Source Variants

Two printable rectangular storage-box variants and their separate covers from a Losi Micro B/T source project labeled 1:24 and 1:28. Each box has tall side walls, curved internal transitions, inset internal support surfaces and rail-like features around the lid opening. The Micro B source variant has a broad raised internal divider; the Micro T variant has a narrower open rectangular internal compartment. Both cover meshes are flat panels with edge steps and a circular finger opening. Four unchanged original STL files are included with descriptive English filenames: one box and one cover for each source variant. The source vehicle names and scale labels identify the intended project; internal clearance and fit to a particular vehicle have not been independently verified. No official Losi affiliation is implied. The word lightweight in the source naming is not a tested strength or weight specification. The new cover displays both actual box meshes open, with the two supplied lids laid alongside so their interior features and finger openings remain visible. Blue boxes, sand-colored lids, a changed viewing angle and a new workshop background distinguish it from the source photo. The original download geometry is unchanged. Vehicles and other contents are not included. Check usable internal length, width and height against the vehicle, and test the lid rails and edge tolerances before printing the full set. Print orientation, wall strength, material choice and clearances depend on the intended storage use and printer. No validated print profile, drop test or load rating is supplied. MESHOPIA has not tested printing, lid fit or protective performance. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Joinable Curved RC Jump Ramps and Connector Strips - Four Ramp Variants and Two Connectors

Printable ramp variants and joining strips from a Losi Micro B/T RC ramp source project. Inspection shows four curved wedge-like ramp meshes with broad rising decks and side holes, plus two long flat connector strips with four holes each. The original, mini and V2 decks have smooth surfaces; the V3 deck has a dense repeating raised surface pattern. These are alternative ramp designs rather than four sections that must all be assembled into one ramp. Six unchanged original STL files are included with descriptive English filenames. Original, mini, V2 and V3 labels follow the supplied file variants; no validated vehicle scale, tire compatibility or ramp load rating is supplied. Losi Micro B/T identifies the intended source project and does not imply official affiliation or verified fit. The new cover displays the four actual ramp variants and the two supplied connector strips separately, in blue and sand tones, from a changed viewing angle over a workshop background. It does not invent a vehicle or add parts absent from the files. The download geometry is unchanged. Check ramp width, deck curvature, joining-hole spacing, fastening requirements and ground stability for your intended vehicle. Additional fasteners and physical vehicles are not included. Material, print orientation, wall thickness and infill should be selected for the intended use after inspection and testing. Tested printing settings, impact resistance and jump performance are not supplied. MESHOPIA has not tested printing, fit, strength or RC driving performance. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Ribbed Road Barrier Sections, Curved Connectors and Accessory Meshes - Ten STL Files

Printable scene components from a Road Barrier V1 source project. Inspection finds two long ribbed barrier variants with broad feet, molded top-cap details, upper eyelets and cylindrical end connections. One straight variant also has an extra opening in its top surface. Four compact curved or corner sections have complementary cylindrical and open-channel ends, with upper eyelets. The remaining meshes are a shallow circular cup, a spherical piece with a loop, a tapered round piece with a central hole and an L-shaped rod. Their exact assembly roles are not documented by the supplied filenames. Ten unchanged original STL files are included with descriptive English filenames. Several original files use generic object names, so the new names describe visible shape and distinguish variants without inventing hardware specifications. No validated scene scale, vehicle compatibility or completed assembly instructions are supplied. The new cover displays all ten actual source meshes separately in blue and sand tones, from a changed angle over a workshop background. The barriers are upright and their accessory pieces are laid alongside. It does not claim a verified connected layout or add a vehicle. The original download geometry is unchanged. These parts are for miniature scenes or RC-course planning, subject to dimensional checks. They are not rated as real road-safety equipment. Check mating channels, cylindrical joints, eyelet holes, clearances and scene dimensions before fabrication. A validated print profile, bill of materials and impact-resistance test are not supplied. MESHOPIA has not tested printing, fit or strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Setup Wheels, Knurled Knobs and Camber Gauge Meshes - Fifteen STL Files

Printable RC setup-tool meshes from an AMS-labeled source project. The files contain four six-spoke disc-like wheels with hexagonal center recesses and broad straight extensions, four cylindrical knurled knobs with hexagonal recesses, and seven flat notched camber-gauge meshes. The gauge filenames carry source values of 0, 0.5, 1, 1.5, 2, 2.5 and 3 degrees. These values are source labels; measuring accuracy has not been independently verified. Fifteen unchanged original STL files are included with descriptive English filenames. The repeated wheel and knob files are retained as supplied rather than removed on the basis of similar appearance. Hexagonal interfaces are visible, but a verified interface size, vehicle scale and tested hardware fit are not supplied. AMS identifies the source naming and does not establish a required multicolor printing process. The new cover arranges all fifteen actual meshes separately: blue setup wheels, sand-colored knobs and the seven gauge pieces. A changed angle and workshop background distinguish it from the supplied image. It illustrates the downloadable pieces rather than a calibrated instrument or tested assembly; the original geometry is unchanged. Check center recesses, axle fasteners, wheel contact surfaces and gauge profiles against the intended chassis. Any metal nuts, screws, axles, measurement references and RC vehicles are not included as physical supplies. Verify each gauge against a trusted angular reference before using it for suspension adjustment. Tested printing settings, measurement tolerances and a validated assembly guide are not supplied. MESHOPIA has not tested printing, fit or measurement performance. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Seated Footballer-Style RC Driver Figure - Single STL Mesh

A detailed seated driver figure from a Ronaldo-named RC source file. The actual mesh depicts a short-haired footballer-style figure with raised hands, bent legs, a long-sleeved jersey, shorts, socks and studded boots. The hands suggest a driving pose, but no steering wheel, seat or vehicle is included. The original STL and a geometry-preserving 3MF viewer copy are supplied. One unchanged original STL mesh is supplied with a descriptive English filename. Its losslessly compressed ZIP delivery preserves the original geometry. No verified scale, mounting system or chassis compatibility is supplied. Inspect the mesh dimensions and seating position against your intended vehicle before printing. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. Printing settings, support requirements and mounting instructions have not been validated. MESHOPIA has not tested printing or fit.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Stackable RC Car Stand Platforms, Posts and Slotted Display Tray - Eight STL Files

A stackable RC display-stand source project containing three rectangular platform meshes, four separate square posts and one slotted display tray. One platform has four tall posts with stepped tips, one has four shorter posts, and the third is a plain box-like platform. The separate posts also have stepped tips. The additional tray contains a series of parallel slots and is named as a trophy stand in the source. Eight unchanged original STL files are included with descriptive English filenames. The similar loose posts are retained as supplied. No verified vehicle scale, maximum load or model compatibility is supplied. The platform footprint is approximately 250 by 175 source-coordinate units; these numerical coordinates are not a calibrated physical-size claim. The new cover uses all eight actual meshes. The plain platform is placed above the tall-post platform as an illustrative two-tier rack. The alternative short-post platform, four loose posts and the slotted tray are shown separately alongside. The blue rack and sand-colored accessories use a changed angle and a locally generated workshop background. No RC vehicles or trophies are included in the image or download. This visual stack is not a validated assembly; downloadable parts are unchanged. Inspect underside interfaces, post engagement, spacing and stability before fabrication. Check that your vehicle footprint fits each shelf and determine safe loading experimentally. Printing settings, assembly tolerances and a validated load rating are not supplied. MESHOPIA has not tested printing, fit, stability or strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Paddle Tires and Spoke Wheels - Five Tire and Five Wheel STL Meshes

An RC paddle-wheel source project containing five hollow tire meshes with broad external paddle lugs and five separate spoke-pattern wheel meshes. The tire interiors have annular seating features; the wheels have central hub openings and a circumferential outer groove. Similar instances are retained as supplied rather than discarded based on appearance. All ten unchanged original STL files are supplied inside a losslessly compressed ZIP, with descriptive English filenames. One original wheel STL is also supplied separately for the main 3D viewer. Extract the ZIP to access the complete set. No verified vehicle scale, axle-interface size or tested chassis compatibility is supplied. The new cover pairs the five actual tire meshes with the five actual wheels concentrically, as an illustrative mounted display. Dark tires, blue wheels, a changed angle and a locally generated workshop background distinguish the cover from the supplied photograph. The arrangement does not establish a tested interference fit, secure retention or driving performance; the original downloads remain unchanged. Check tire seating, wheel grooves, hub openings and axle fastening against the intended vehicle. Tire-like geometry does not establish flexible material behavior: select suitable printing materials only after checking the project requirements. Motor, chassis, axle shafts, nuts and other hardware are not included as physical supplies. Printing settings, material specifications and tested traction or durability are not supplied. MESHOPIA has not tested printing, mounting or powered operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.

Technology: Sin probar
material: —
Difficulty: Sin especificar