MESHOPIAScale modelling & RC7 tagged models · Page 1 of 1
This RC car stand is designed for use with 1/14 scale vehicles and features an integrated drawer for storage. Practical uses include providing a dedicated display or maintenance platform for 1/14 scale RC cars while utilizing the built-in drawer for small parts or accessories. The model includes the following files: - Car Stand v8.stl - Drawer.stl - Handle.stl
Purpose: This is a simple stand designed to assist with RC car springs and tires. 1. Practical Uses: It can be used as a jack or stand for RC cars and other models. 2. Included Parts: carjack.stl. 3. Printing/Assembly Guidance: The author suggests printing with PLA using 15% infill and 2 perimeters without supports. A nail is used as a pin during assembly. If a larger version is required, the author suggests scaling the model up in the slicer. IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.
Raise a suitable RC car above the work surface with this printable flat-top stand. Inspection of the supplied STL identifies five separate mesh components: a compartmented base with a central socket, a cylindrical support post, a rectangular perforated top plate, and two ring-shaped collars. The base provides six recessed trays for loose parts. The top has grouped circular openings and smaller mounting holes. One STL is included, renamed 01-flat-top-stand-five-part-layout.stl. It contains the five parts in their original separate layout. The geometry and original arrangement in the download are preserved; separate the components in your slicer as appropriate. No vehicle, screws or other hardware are supplied. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. No vehicle scale is established by the supplied filename. Check the top footprint, clearance and post interfaces against your vehicle before printing. Choose material and orientation for the expected load, inspect supports in the slicer, and test stability before placing a vehicle on the stand. No tested print profile is provided.
Support an RC car during display or maintenance with this source CAD stand. The inspected geometry contains a rectangular platform with a grid of hexagonal openings, four extended corner legs, braced transitions and open side clearances. The new cover shows the actual supplied geometry in teal, with a changed angle and a workshop setting. No RC car or extra hardware is added. Two files are included: the unchanged original STEP CAD file and an STL derived locally from that STEP geometry for preview and printing workflows. English filenames distinguish the editable CAD source from the derived mesh. Inspect the STL tessellation and use the STEP file when your workflow supports CAD. The rendering changes presentation orientation and finish without changing the supplied design. Check the platform footprint, chassis contact area, underside clearances, stand height and stability against your vehicle before printing. No verified load rating, rubber contact pads, fasteners or tested printing profile were supplied. MESHOPIA has not tested fit, printing, stability or strength. The source project identifies a 1:8 RC context; that label does not guarantee compatibility with every 1:8 chassis. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.
Support an RC car during display or maintenance with this source CAD stand. The inspected geometry contains a long platform with rounded ends, open braced feet and connecting supports underneath. The new cover shows the actual supplied geometry in teal, with a changed angle and a workshop setting. No RC car or extra hardware is added. Two files are included: the unchanged original STEP CAD file and an STL derived locally from that STEP geometry for preview and printing workflows. English filenames distinguish the editable CAD source from the derived mesh. Inspect the STL tessellation and use the STEP file when your workflow supports CAD. The rendering changes presentation orientation and finish without changing the supplied design. Check the platform footprint, chassis contact area, underside clearances, stand height and stability against your vehicle before printing. No verified load rating, rubber contact pads, fasteners or tested printing profile were supplied. MESHOPIA has not tested fit, printing, stability or strength. No verified vehicle scale was supplied. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.
A compact folding stand source project supplied as thirteen separate STL files. The geometry includes a rectangular platform with recessed circular openings and long channels, two complementary open-frame leg sections with cylindrical hinge features, four small flat tabs, four longer rounded-end strips and two shorter rounded-end strips. All repeated small pieces remain individual files. Thirteen unchanged original STL files are included with descriptive English filenames. The supplied names do not identify a tested vehicle scale, weight capacity, exact strip material or a validated assembly procedure. The main platform measures approximately 120 by 140 in the source coordinate units; STL does not store an explicit physical unit. Confirm slicer units and intended dimensions before fabrication. The new cover uses the actual meshes in an illustrative folded arrangement, with the two leg sections laid across the platform and the ten small tabs and strips shown separately alongside. Blue, sand and graphite finishes, a different angle and a new workshop background replace the source photograph. The image illustrates the components and does not verify hinge alignment, folding travel, load capacity or assembled function. Check hinge clearances, attachment hardware, strip fit, surface contact and vehicle support requirements before printing or loading the stand. A tested print profile, load rating and verified bill of materials are not supplied. MESHOPIA has not tested printing, fit, strength or stand operation. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.
A stackable RC display-stand source project containing three rectangular platform meshes, four separate square posts and one slotted display tray. One platform has four tall posts with stepped tips, one has four shorter posts, and the third is a plain box-like platform. The separate posts also have stepped tips. The additional tray contains a series of parallel slots and is named as a trophy stand in the source. Eight unchanged original STL files are included with descriptive English filenames. The similar loose posts are retained as supplied. No verified vehicle scale, maximum load or model compatibility is supplied. The platform footprint is approximately 250 by 175 source-coordinate units; these numerical coordinates are not a calibrated physical-size claim. The new cover uses all eight actual meshes. The plain platform is placed above the tall-post platform as an illustrative two-tier rack. The alternative short-post platform, four loose posts and the slotted tray are shown separately alongside. The blue rack and sand-colored accessories use a changed angle and a locally generated workshop background. No RC vehicles or trophies are included in the image or download. This visual stack is not a validated assembly; downloadable parts are unchanged. Inspect underside interfaces, post engagement, spacing and stability before fabrication. Check that your vehicle footprint fits each shelf and determine safe loading experimentally. Printing settings, assembly tolerances and a validated load rating are not supplied. MESHOPIA has not tested printing, fit, stability or strength. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components.