15 tagged models · Page 1 of 1

#rc boat

Discover 3D models tagged rc boat and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

RC F1 Boat With Outboard Mercury Racing 360

This RC F1 Powerboat kit consists of a 70cm F1 hull and a Mercury Racing 360 style outboard engine. The outboard engine stands 20cm in height and is designed for use with hulls 70cm or larger. It features a water-cooling system, a gear lubricant hole, and adjustable trim and height mounting. **Practical Uses** This kit is designed for remote-controlled watercraft enthusiasts. The outboard engine is versatile, intended to be compatible with various hulls above 70cm. **Included Parts** * **Outboard Engine Components:** 2x 4mm 15t 0.8 bevel gear shafts, 1x 604zz bearing, 5x 684zz bearings, 4mm 30cm shaft, 4mm drive dog, rigid coupler joint (4x5), propeller (up to 50mm), brushless motor (up to 4076 size), 18x M2.5 heat inserts, 18x M2.5x5 screws, 2x M3 x35/40 screws with nuts, 1x M2x3 self-tapping screw, and 2x push rod connectors. * **Hull Components:** 16x M3x8mm screws, 4x M3x25mm screws with nuts, 3x M3x40mm screws with nuts, and push rod or stainless steel leader fishing wire. **Printing and Assembly Guidance** * **Outboard Engine:** Use a 0.4mm nozzle with 0.15mm layer height. Set 5 perimeters, 5 top/bottom layers, and 30% infill. No support is required. The author used PLA for the main body and ABS for the motor mounting. * **F1 Hull:** Use a 0.4mm nozzle with 0.2mm layer height. Set 2/3 perimeters, 4 top/bottom layers, and 15% infill. Support is only required for the servo mount. * **General FDM Settings:** 0.4mm nozzle, 0.2mm layer height, 4 perimeters, 4 top/bottom layers, and 30% infill.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC boat rudder

RC boat rudder Purpose This model is an RC boat rudder component designed for use in remote-controlled watercraft. Practical Uses It serves as a replacement or custom part for the steering mechanism of an RC boat, allowing for directional control during operation. Included Parts - RC boat rudder.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Boat MONCY Stand

RC Boat MONCY stand Purpose This model is a dedicated display stand designed specifically for the MONCY RC boat. Practical Uses It serves as a holder to support and display the MONCY remote-controlled boat. Included Parts The model consists of three separate STL files: holder-1.stl holder-center.stl holder-2.stl Printing and Assembly Guidance Users should follow the step-by-step guides provided by the author for printing and assembly instructions. Guides are available in English and Czech via the following links: English guide: https://docs.google.com/presentation/d/1bGKzQMjlVtHwXBEPght8tjOpzJlyTWyS1IBPJ4-zc1w/ Czech guide: https://docs.google.com/presentation/d/1c9fdqCrZ29f2HNamLZ68R8SaJRktiRSm4_e1zuxRhBo/ Attribution: PrintFully3D / FlyTime.cz

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Propellers for RC boat

Propellers for RC boat Purpose This model consists of a set of right and left-handed propellers designed to fit on brushless motors. They are intended for use with a fully 3D printed RC boat designed by Peter Sripol. Practical Uses These propellers are used as propulsion components for remote-controlled (RC) boats. Included Parts - prop_clockwise.stl - prop_counter_clockwise.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

OrganizaciónFree

Honeycomb Wall RC Boat Mount

Purpose: This model is a shelf designed to fit onto a honeycomb wall system for the purpose of storing an RC boat. Practical Uses: It provides a space-saving storage solution for RC boats by utilizing honeycomb wall mounting. Included Parts: - boatHex.stl Printing/Assembly Guidance: The author notes this model is difficult to print due to its thin construction. It requires supports, and removing them without breaking the thin honeycomb structure requires significant effort.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Water intake for RC boat model

This model is a water intake component designed for use with an RC boat model. It features a single inner hole with a diameter of 3 mm. Practical uses include providing a water intake channel for RC boat cooling systems. Included files: - ЗАБОРНИК под один канал мод 1.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Base for a headlight on a Rc boat

Base for a headlight on a Rc boat Purpose This model set provides two versions of a headlight base for RC boats. One version is provided without holes, allowing the user to add them later based on specific requirements. Practical Uses The set includes a socket designed for 5mm-8mm LEDs to be used as marker lights. The diode sockets are engineered for a tight fit achieved by pressing the diodes into place, which facilitates potential replacement if necessary. Included Parts - Headlight base models (two versions: фар.stl and фар3.stl) - Socket (цокъл.stl) - Nut (гайка.stl) - 8mm socket (гнездо8мм.stl) - 8mm Nut (Гайка 8мм.stl)

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Boat MOA test part

RC Boat MOA test part Purpose This model is the bow of the MOA ship. It is designed as a test part to determine if a user's printer is capable of printing the entire model. Practical Uses It serves as a large-scale print test for hobbyists working on the MOA project. The full model is available via the official PrintFully3D website. Included Parts - Part 3.stl Printing and Assembly Guidance Printing this part takes more than 20 hours. It is necessary to place suitable supports during the printing process. Users are advised to follow the step-by-step guides available in English and Czech via the provided documentation links to ensure proper results. Attribution: PrintFully3D / FlyTime

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Jet Boat

RC Jet Boat Purpose This model is a small, easy-to-print RC jet boat designed for hobbyists. The author has adapted all components to ensure compatibility with smaller 3D printers. Practical Uses It is intended for use as a remote-controlled watercraft. Due to its scaled design, it serves as an accessible project for those with limited printing bed space. Included Parts The model consists of the following STL files: - Rumpf vorne (Front hull) - Rumpf hinten (Rear hull) - Deckel vorne (Front lid) - Deckel hinten (Rear lid) - Schiffsschraube (Propeller) - Auslass (Outlet/Exhaust) - Lenkung (Steering mechanism)

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Boat Rudder

Purpose This model is a small rudder designed for use in homemade RC boats. Practical Uses It serves as a steering component for remote-controlled boat models. Included Parts - rudder mount.stl - rudder top link.stl - rudder fin.stl Hardware Required - 1x m2-6mm servo rod - 1x m3-20mm rudder top link pivot - 2x m4-10mm mounting to boat

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Vase Mode Boat Hull

Purpose This is a scalable boat hull designed to serve as a base for additional components and modifications. Practical Uses The hull is intended to be used as a foundation for creating custom RC boats. The provided files allow users to design and add their own motor mounts and other attachments. Included Parts - Vase mode boat.step - Vase mode boat.stl Printing and Assembly Guidance The author states this is a solid hull intended to be printed using vase mode. When printed, the model is approximately 368mm long.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Catamaran

This model is a catamaran designed to float on water. According to the author, the design is suitable for use as an RC boat and is described as kid-friendly and easy to use. Practical uses for this model include recreational water activities and remote-controlled boating. Included files: - catamaran.stl - battery holder1.stl - battery holder2.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Servo horn, control surface - glue in place

Servo horn, control surface - glue in place Purpose This model is a servo horn designed to be glued directly to a control surface on an RC plane or boat. Practical Uses It serves as a mechanical link for remote-controlled vehicles. The author advises users to check the dimensions and adjust the scale to ensure compatibility with their specific application. Included Parts - servo-horn.stl - servo-horn_0.2mm_PLA_MINI_28m.gcode Printing and Assembly Guidance For printing, the author recommends using PETG or PLA. The optimal orientation for printing is on the side.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

RC Boat

This is a printable RC boat model. The author states that the model can be printed without the use of supports. Practical uses include building a remote-controlled boat. The author suggests an optional layer height ranging from 0.35mm to 0.1mm. Included files: - cabin roof.stl - rudder.stl - boat cabin.stl - cap 1.stl - cap 2.stl - screw.stl - fuselage pt2.stl - fuselage pt.1.stl - lodka finish.stl

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteFree

Armidale-Class RC Patrol Boat — 1:35 Scale — Multipart STL Kit

Armidale-class patrol-boat model with a long pointed hull, low sloping superstructure, bridge, twin mast arrangement, deck railings and foredeck gun mount. The included assembly manual identifies a 1:35 scale kit. Physical dimensions and RC operation have not been independently tested. PACKAGE CONTENTS The complete ZIP contains 22 unique supplied STL meshes with new English filenames, an English source-label guide and the original 104-page assembly instruction manual under a new English filename. The file set includes multi-part print layouts; separate printed elements need identification and assembly. Original downloadable geometry and coordinates are preserved. The viewer STL is one source layout and does not depict the whole assembled ship. ASSEMBLY AND PRINT PREPARATION Use the included manual to identify the cradle, hull sections, superstructure, deck fittings, gun mount, bridge and mast elements. Inspect dimensions, print supports and fit. The original manual includes hull sealing, painting and electronics guidance; follow those sections when planning a physical RC build. Motors, electronics, propellers and hardware must be sourced separately. No tested watertightness, flotation, electrical system or operating performance is claimed. ORIGINAL MESHOPIA PRESENTATION The complete ship and its display cradle are shown. This is an illustrative visualization rather than a photograph of a tested print. The current cover is an original AI-assisted MESHOPIA photorealistic illustration of the supplied model or its components in a hobby-workshop use or finishing scene. It illustrates a proposed finish and does not document a manufactured, printed, assembled or tested prototype. Consult the downloadable source files for the geometry and included components. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar