2 modelos etiquetados

#servo

Descubre modelos 3D etiquetados como servo y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

ElectrónicaGratis

Replacement arm for MG995 servomotor

Printable arm or horn to replace the output attachment of an MG995 servomotor. It is a coupling piece between the servo shaft and the mechanism to be moved; it does not include the servomotor or the control rod. The compatibility indicated by the source is limited to the MG995 and must be verified with the specific unit, especially regarding the central splining and the fastening. Preparation, compatibility, and printing The author suggests a 50% infill. This data does not certify the strength of a particular print. Before assembling, check that the splining fits without force, that the screw holds the piece, and that the arm does not rub during the entire range of motion. Prepare a fit test first and avoid compensating for an incorrect fit by tightening the screw further.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vista de Soporte de servo con alojamiento para conector

RC & MecánicaGratis

Servo bracket with connector housing

Mount for a servomotor that incorporates a zone intended for a female servo cable connector. The design aims to house the servo and organize the cable output. The source does not identify a specific servo model or its dimensions, so compatibility must be verified in the file and with the physical component. Preparation, compatibility, and printing The hardware is described as "832" and "832 × 1 3/4"; this notation needs confirmation before purchasing or forcing screws into the part. Compare the position of the lugs and the cable path, and ensure the connector remains accessible. No material or profile is documented. Perform a fit test without powering the servo and keep the arm's range of motion clear.

Technology: Sin probar
material: —
Difficulty: Sin especificar