Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#esc

Descubre modelos 3D etiquetados como esc y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Carcasa tubular para variador de coche RC de drift 1:10

Tubular housing for 1:10 scale RC drift car ESC

Tubular housing designed for an electronic speed controller (ESC) of a 1:10 scale drift car. The author uses PETG and clarifies that the piece shown in their photograph has been polished. They do not identify the specific ESC model nor do they provide information regarding universal compatibility, a degree of waterproofing, or a cooling function. Preparation, compatibility, and printing Compare the internal dimensions with your ESC and reserve space for connectors and cables. Also, check that the housing does not obstruct the necessary ventilation for the equipment. Polishing is a post-processing finish, not an automatic property of the print. The source does not specify layer height, infill, or orientation; prepare a fit test before installing the electronics.

Technology
Sin probar
material
PETG
Difficulty
Sin especificar
Vista de Cubierta antipolvo para Traxxas Slash LCG 4WD

Dust cover for Traxxas Slash LCG 4WD

Cover for the electronics of the Traxxas Slash LCG 4WD that maintains access to the battery swap and the ESC operation. The source describes two variants depending on the position of the ESC button: one for the old 3355X, with visible capacitors, and another for the 3355R. It also offers two solutions for the front intake: a grille with filtering material or a solid piece which, according to the author, does not filter dust from the air. The rear fan is the original Velineon, oriented to exhaust air. Preparation, compatibility, and printing The documented assembly uses nine M3 × 6 screws for the grilles and another M10 × 6 for the connector cover; one M3 × 10 in the front, two M3 × 20 on the side, and four M3 × 10 with four self-locking nuts for the fan. The hinge uses a piece of 1.75 mm PETG filament. First select the ESC variant and check access, wiring, and ventilation. No waterproofing or a complete print profile is certified; keep the air inlets and outlets clear.

Technology
Sin probar
material
—
Difficulty
Sin especificar