Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

12 modelos etiquetados · Página 1 de 1

#tamiya

Descubre modelos 3D etiquetados como tamiya y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Placa de batería de fondo plano para Tamiya Monster Beetle 2015

Placa de batería de fondo plano para Tamiya Monster Beetle 2015

Placa de cierre lateral del alojamiento de batería del Tamiya Monster Beetle, reedición de 2015. El autor sustituyó la cara interior nervada por una superficie plana para alojar su batería, que resultaba unos 4 mm más larga que el espacio disponible con las placas originales. Esa medida describe su caso y no garantiza una ampliación idéntica en otras unidades. Preparación, compatibilidad e impresión La fuente propone PETG o PLA y contempla aumentar al 100 % el relleno alrededor de los orificios. Comprueba longitud y anchura de tu batería antes de imprimir y evita que la placa o los tornillos presionen la carcasa. Revisa el cierre y el paso de los cables con el equipo apagado; no fuerces una batería que siga siendo demasiado grande.

Tecnología
Sin probar
Material
PETG, PLA
Dificultad
Sin especificar
Vista de Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Purpose This mount is designed to install a Visaton FRS 7 S wideband speaker into the roof module of a Tamiya Scania 770S RC model. The construction aims to provide a stable, vibration-reduced, and acoustically optimized mounting solution that integrates into the existing roof structure without altering the vehicle's exterior appearance. Practical Uses The mount allows for the installation of a speaker within the roof so that sound radiates downward into the cabin. It features a low-profile design to prevent collisions with the cabin interior and includes integrated cable management channels to route speaker wires cleanly. Included Parts - Lautsprecher Halterung Scania S770-RC.stl Printing and Assembly Guidance For FDM 3D printing, PETG or ABS is recommended for stability and temperature resistance, while a TPU-hybrid is listed as an alternative for vibration damping. It is suggested to use at least 30–40% infill for stiffness, with 100% infill for critical areas like the screw domes. A thin damping layer, such as a TPU ring or foam rubber, is intended to be placed between the speaker and the mount to minimize resonances.

Tecnología
Sin probar
Material
PETG, ABS
Dificultad
Sin especificar
Vista de Borbet wheel for M-size RC cars

Borbet wheel for M-size RC cars

Borbet wheel for m size rc cars Purpose This model is a resized Borbet wheel specifically designed to fit M-size RC chassis. Practical Uses According to the author, the wheel is compatible with chassis such as the Tamiya M05, MB01, and HPI Cup Racer. While the author notes it may fit other chassis, they have not tested it for compatibility with other models. Included Parts - Borbet M size.stl Note: A separate 3D model of a tire intended for drifting is available via an external link provided by the author at: https://www.printables.com/model/1404748-m-size-tire-for-tamiya-m-size-wheels

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Rally rims Alfa Romeo 26 mm TAMIYA

Rally rims Alfa Romeo 26 mm TAMIYA

Rally rims Alfa Romeo 26 mm TAMIYA Purpose This 3D model provides custom-designed rims specifically created for an Alfa Romeo GT rally model. The author developed these files to fill a gap in available parts for this specific vehicle type. Practical Uses These rims are intended for use with a Tamiya Alfa Romeo GT rally model. They are designed to fit a 26 mm scale requirement. Included Parts - felga vintage rally.stl Printing and Assembly Guidance The author recommends using PETG as the material for printing these rims.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya XV-02 upgrade direct steering

Tamiya XV-02 upgrade direct steering

Tamiya XV-02 Upgrade Direct Steering Purpose This model is an upgrade for the Tamiya XV-02 direct steering chassis. According to the author, the upgrade is designed to improve the turning radius and eliminate play within the steering system compared to the original setup. Practical Uses It is intended for use on Tamiya XV-02 RC chassis to enhance steering precision and maneuverability. Included Parts The digital files provided include: - Main board tamiya XV02 (new version for better service) - Main board tamiya XV02 - Battery guard old servo mount - Servo saver board tamiya XV02 - XT 60 holder - Steering arm tamiya XV02 (2 pieces) Printing and Assembly Guidance The author recommends using PETG or a stronger material for printing and specifically does not recommend using PLA. The author reports using PETG for this upgrade without problems. To complete the assembly, the following hardware is required: - 2 pieces of 30mm x 4.6mm M3 hex spacers - M3 nuts - M3 screws - M3 x 30mm screws (used to secure the handle to the bottom of the chassis near the main gear)

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya M03/FF02 Center Extension 257mm Wheelbase

Tamiya M03/FF02 Center Extension 257mm Wheelbase

Tamiya M03/FF02 Center Extension 257mm Wheelbase Purpose This center section is designed to convert a Tamiya M03 chassis into a Tamiya FF02. The design provides dedicated space for mounting an ESC and a receiver. Practical Uses This kit is intended for RC chassis conversions. The author reports the parts are suitable for race-use when printed with specific settings. Included Parts The digital files include the following components: - Center extension (various formats: Left, Right, Bottom, Complete, and main STL) - Shock towers (Front and Rear) - Upper arms (Front and Rear TL01 style) Printing and Assembly Guidance For race-use, the author recommends printing in PETG with 5 walls, 5 top/bottom layers, and 40% cubic infill. These parts should be used in conjunction with Tamiya TL01 suspension arms. Assembly requires the following hardware: - M2.5x16mm bolts for the plate under the extension (utilizing predrilled holes in the sides). - M3x8mm bolts for the front. - M3x16mm bolts for the rear. Attribution: Based on source data provided by the author.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer

Tamiya Neo Scorcher shock spacer Purpose The author designed these basic spacers to increase the stiffness of the shocks. This modification is intended to make the car sit higher, making it more suited for off-road runs. Practical Uses These spacers are used to adjust the suspension height and hardness on a Tamiya Neo Scorcher, specifically optimized for off-road driving conditions. Included Parts - tamiya neo scorcher shock spacers rear.stl - tamiya neo scorcher shock spacers front.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de TAMIYA CR-01 Battery Holder

TAMIYA CR-01 Battery Holder

This model is a simple battery holder designed specifically for the TAMIYA CR-01. Purpose and Practical Uses The holder serves as a component for the TAMIYA CR-01 RC vehicle. To ensure a proper fit within your specific vehicle, the author suggests adding materials such as urethane to adjust the thickness as needed. Included Parts The package includes one STL file: RC TAMIYA CR-01_BAT_BK.stl. Printing and Assembly Guidance For optimal printing results, the following settings are recommended: - Layer height: 0.2mm - Infill: 20% - Supports: Required - Build plate adhesion: A raft is recommended for better adhesion.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de TAMIYA CR-01 Suspension mount

TAMIYA CR-01 Suspension mount

RC:TAMIYA CR-01 Suspension mount Purpose This model is a suspension mount designed for use with the TAMIYA CR-01 RC crawler. Practical Uses It serves as a component for the vehicle's suspension system. Users should note that dimensions may vary slightly depending on the printing temperature used, and post-print processing may be necessary for a proper fit. Included Parts - RC TAMIYA CR01_COIL_BK.stl Printing and Assembly Guidance For optimal results, the following print settings are recommended: - Layer height: 0.12mm - Infill density: 50% - Support: Required - Build plate adhesion: Raft recommended

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya VX-02 Pro RX Box, RX Container

Tamiya VX-02 Pro RX Box, RX Container

TAMIYA VX-02PRO RX BOX, RX Container Purpose This model is an RX container designed specifically for the Tamiya VX-02 Pro chassis. Practical Uses It serves as a dedicated RX box for RC rally applications involving the Tamiya VX-02 Pro chassis. Included Parts - RX Box Tamiya VX-02.stl - TPU FLEX part for Rx Box Tamiya VX-02.stl Printing and Assembly Guidance The author recommends printing the main container using PETG and the seals using TPU or FLEX material. To assemble the container, 6 pieces of M2.5x12mm screws are required to screw the components together.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya XV02 Rally Car Stand

Tamiya XV02 Rally Car Stand

Tamiya XV02 Rally Car Stand Purpose This low profile stand is designed specifically for the Tamiya XV02 Rally Car. Its primary purpose is to attach directly to the chassis, making the vehicle easy to display on a shelf. Practical Uses It serves as a dedicated display solution for RC enthusiasts looking to showcase their Tamiya XV02 models in a compact, shelf-friendly manner. Included Parts - Tamiya XV02 Rally Car Stand.stl Printing and Assembly Guidance According to the author, the model should be printed at a 90-degree angle. Recommended print settings include a 0.10 layer height and 0.30 infill. The estimated print time is just over 2 hours.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar