8 modelos etiquetados · Página 1 de 1

#battery holder

Descubre modelos 3D etiquetados como battery holder y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

RC & MecánicaGratis

RC Plane Tip with 700mAh battery holder

RC Plane Tip with 700mAh battery holder Purpose This model is a protective tip designed for an RC plane. Its primary function is to increase the durability of the aircraft to prevent breakage during use. Practical Uses In addition to providing protection, the tip serves as a mounting solution by including a dedicated holder designed to carry half of a 700mAh LiPo battery. Included Parts - RC Plane Tip with integrated 700mAh battery holder Printing and Assembly Guidance Not specified in the source text.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

X-Ray M18T battery holder

X-Ray M18T (RC car) battery holder Purpose This model is designed to accommodate larger batteries, such as a 2s 1100 mAh LiPo, within the X-Ray M18T chassis. Because these larger batteries do not fit standardly and tend to stand on edge on the rim, this part raises the floor to the rim level to create a flat mounting surface. Practical Uses It provides a stable platform for oversized batteries that would otherwise be unstable. The design includes a dedicated channel to accommodate a reusable cable tie (for example, a "Workzone 250x7.5mm") to function as a battery strap. Included Parts - batteryBase.stl - batteryBase.scad Assembly Guidance The part is intended to be held in place by a tight fit, though the author suggests using thin double-sided tape or a small amount of silicone to secure the holder to the car. The base plate features pre-drilled holes for mounting; however, extreme caution must be taken during assembly to ensure that screws never puncture the battery, as this poses a fire risk.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

Juguetes y juegosGratis

RC Battery Holder for 5 Batteries

This model is a specialized holder designed to organize and store RC batteries. It is specifically intended for 350mAh RC model batteries, providing a dedicated space to keep multiple units in one location. Purpose The primary purpose of this model is to serve as an organizer for RC model enthusiasts, allowing for the orderly storage of battery packs to prevent clutter and ensure easy access during hobby activities. Practical Uses This holder is useful for RC model builders and hobbyists who need to manage their power supplies. It is designed to hold up to 5 RC batteries simultaneously, making it suitable for workshop organization or field use. Included Parts The package includes one STL file: RC Akku 5 fach fertig.stl. Printing and Assembly No specific printing or assembly guidance is provided in the source documentation.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

TAMIYA CR-01 Battery Holder

This model is a simple battery holder designed specifically for the TAMIYA CR-01. Purpose and Practical Uses The holder serves as a component for the TAMIYA CR-01 RC vehicle. To ensure a proper fit within your specific vehicle, the author suggests adding materials such as urethane to adjust the thickness as needed. Included Parts The package includes one STL file: RC TAMIYA CR-01_BAT_BK.stl. Printing and Assembly Guidance For optimal printing results, the following settings are recommended: - Layer height: 0.2mm - Infill: 20% - Supports: Required - Build plate adhesion: A raft is recommended for better adhesion.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

OrganizaciónGratis

7.4v 1000mah RC Battery Holder

Purpose This model provides storage solutions specifically designed for 7.4v 1000mah RC batteries. Practical Uses These holders can be used to organize or secure RC batteries in various configurations. Included Parts - Rc_Battery_Holder_2.stl - Rc_Battery_Holder_4.stl - Rc_Battery_Holder_6.stl - Rc_Battery_Holder_8.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

OrganizaciónGratis

7.4v 1000mah Module Rc Battery Holder

Purpose: This is a modeler version of a 7.4v 1000mah RC battery holder. Practical uses: Designed for organizing or holding RC car batteries. Included parts: - Module_Rc_Car_battery_holder.stl - Module_Rc_Car_battery_holder_left_Rail.stl - Module_Rc_Car_battery_holder_Right_Rail.stl - Module_Rc_Car_battery_holder_Right__Left_Rail.3mf

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Battery tray for Dlux 2.2 rock crawler rig

Purpose This battery tray is designed to be suspended by the cross bars of a Dlux 2.2 rock crawler rig. It allows the battery to be slid across the cross members to adjust left/right weight distribution and tucks the battery further away from potential harm. Practical Uses The tray is sized specifically for a GensAce 850mAh 3S battery. According to the author, using this setup in their rig results in only 1% more weight on the front axle compared to placing the battery directly on the front axle. Included Parts - DLux Battery Tray.stl Printing/Assembly Guidance The author printed this part on a Prusa using supports, though they suggest it might be possible to print without them.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

RC & MecánicaGratis

Battery holder for Larva X RC frame

Battery holder for Larva X RC frame Purpose This model is a battery holder designed for use with the FEICHAO Larva X frame. It is intended for users who have moved a Mobula8 onto this specific frame. Practical Uses It serves as a mounting solution for batteries within the Larva X frame. To reduce weight, the bottom plastic portion of the holder can be removed. Included Parts - larva-bat.stl Printing and Assembly Guidance The author suggests printing with either PLA or PETG, though PLA is preferred. Printing should be performed using organic supports. After printing, the holder requires post-processing with a small file at the contact points where it fits onto the frame.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar