Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#scania

Descubre modelos 3D etiquetados como scania y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Soporte de altavoz Visaton FRS 7 S para Tamiya Scania 770S

Purpose This mount is designed to install a Visaton FRS 7 S wideband speaker into the roof module of a Tamiya Scania 770S RC model. The construction aims to provide a stable, vibration-reduced, and acoustically optimized mounting solution that integrates into the existing roof structure without altering the vehicle's exterior appearance. Practical Uses The mount allows for the installation of a speaker within the roof so that sound radiates downward into the cabin. It features a low-profile design to prevent collisions with the cabin interior and includes integrated cable management channels to route speaker wires cleanly. Included Parts - Lautsprecher Halterung Scania S770-RC.stl Printing and Assembly Guidance For FDM 3D printing, PETG or ABS is recommended for stability and temperature resistance, while a TPU-hybrid is listed as an alternative for vibration damping. It is suggested to use at least 30–40% infill for stiffness, with 100% infill for critical areas like the screw domes. A thin damping layer, such as a TPU ring or foam rubber, is intended to be placed between the speaker and the mount to minimize resonances.

Tecnología
Sin probar
Material
PETG, ABS
Dificultad
Sin especificar
Vista de Scania — Tractor and Tanker Semitrailer Native OBJ Model

Scania — Tractor and Tanker Semitrailer Native OBJ Model

A Scania cab-over tractor with a long cylindrical tanker semitrailer, top service walkway, chassis and multiple wheel axles. No articulation, fluid system or working mechanism is established. Exact physical scale and manufacturing specifications are unverified. COMPLETE NATIVE SOURCE The English-named ZIP includes the complete supplied OBJ geometry under a new identifying filename and an English guide mapping it to the original numbered source. Original geometry bytes are unchanged. Materials and textures are not promised where they were not supplied. ON-DEMAND 3D INSPECTION A separately selectable lightweight STL display is derived from the complete native geometry. It is simplified and normalized for browser inspection, so its coordinates do not establish fabrication units or replace the original OBJ. The compatible original OBJ inside the ZIP can also be selected through View ZIP parts, subject to the viewer size budget. PREPARATION AND USE Suitable for digital scenes, hobby-miniature display, paint detailing and further modeling preparation. Physical scale, mesh closure, wall thickness, separate-component fit, supports, strength, wheel movement and RC operation are untested. Inspect the native model in suitable software and a slicer before any fabrication. No physical vehicle, paint, tools, printer profile, electronics or working mechanism is included. ORIGINAL MESHOPIA PRESENTATION The cover is our own AI-assisted photorealistic hobby-use illustration, generated locally in ComfyUI from the inspected source geometry with a new finish and workshop setting. It shows miniature paint detailing and is marked MESHOPIA in orange at the lower left. It does not document a physically manufactured or tested sample. Hands, brushes and workshop items are illustrative. Supplier renders and catalog photos are private references and are not the published cover. LICENSE AND AUTHOR Author and publisher: MESHOPIA. CC0 with the collection owner’s confirmed redistribution authorization.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar